# Flashforge Adventurer 5M Pro review

Compact enclosed CoreXY printer with filters and quick nozzles

- Our score: 7.9 out of 10
- Price: $569 (checked Nov 4, 2026)
- Status: on sale
- Best for: enclosed printing in small spaces
- Skip if: you need large or multi color prints
- HTML version: https://robotsforthat.com/robot/flashforge-adventurer-5m-pro/

## Verdict

The Adventurer 5M Pro is a small, enclosed CoreXY printer with built in filtration and quick swap nozzles, and reviewers found it accurate and reliable. It suits classrooms, offices and homes that want ABS or ASA in a closed box. Skip it if you need big prints or multi color, since the bed is only 220 mm and it prints one filament.

## Pros

- Enclosed with dual filtration
- Quick swap nozzles, 0.4 and 0.6 mm included
- Accurate, 100% uptime over a month for 3DPrint.com
- Mostly pre assembled with auto calibration
- Printed full volume ASA without warping

## Cons

- Small 220 mm cube build volume
- Single filament only
- Weak TPU performance
- Rear spool is hard to reach
- Store price was unclear when we checked

## Specs

- build volume: 220 x 220 x 220 mm (Flashforge)
- print speed: Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice
- multi color: No, single filament
- enclosure: Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com)
- auto leveling: Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives)
- max nozzle temp: 280 C (Flashforge)
- heated bed: Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C
- filament types: PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge)
- connectivity: Wi-Fi, Ethernet, USB (Flashforge)
- camera: Yes, built in camera for monitoring (Flashforge)
- noise: Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min
- assembly: About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives)
- weight: 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed

## Safety

- recalls: No recall found for this model as of 2026-10-30 (web search of cpsc.gov for 3D printer recalls by Creality, Bambu Lab, Elegoo, Sovol, Snapmaker and Flashforge; only the Bambu Lab A1 appeared)
- fcc: Not checked
- company status: Active
- warranty: 1 year limited on the printer, 3 months on extruder parts (Flashforge)

## Questions buyers ask

### Can the Adventurer 5M Pro print ABS and ASA?

Yes. It is enclosed and 3DPrint.com printed a full volume ASA part with no detectable warping.

### How loud is it?

Flashforge claims 50 to 55 dB. 3DPrint.com measured 68 dB on average and up to 79 dB.

### What is the difference from the Adventurer 5M?

The Pro adds the enclosed shell with filtration, which makes ABS and ASA practical.

## Sources

1. [Flashforge store: Adventurer 5M Pro](https://flashforge.com/products/flashforge-adventurer-5m-pro)
2. [3DPrint.com: Flashforge Adventurer 5M Pro review](https://3dprint.com/312375/flashforge-adventurer-5m-pro-review-a-compact-powerhouse-for-3d-printing/amp/)
3. [3Dnatives Lab: Adventurer 5M Pro](https://www.3dnatives.com/en/3dnatives-lab-adventurer-5m-pro-3d-printer-flashforge-200620244/)