# Anycubic Kobra S1 Combo vs Creality SPARKX i7

As of Nov 4, 2026, the Anycubic Kobra S1 Combo costs $399 and the Creality SPARKX i7 costs $399. The Anycubic Kobra S1 Combo scores higher in our ranking (8.5 vs 8.1 out of 10). Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/anycubic-kobra-s1-combo-vs-creality-sparkx-i7/

## Side by side

| | Anycubic Kobra S1 Combo | Creality SPARKX i7 |
|---|---|---|
| Price | $399 | $399 |
| 3 year cost | $399 | $399 |
| Our score | 8.5/10 | 8.1/10 |
| Rank in 3D printers | #3 | #6 |
| Status | on sale | on sale |
| Warranty | 1 year | 1 year (Creality Canada store product page) |
| Build volume | 250 x 250 x 250 mm | 260 x 260 x 255 mm (Creality) |
| Print speed | Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes |
| Multi color | Yes, 4 colors with one ACE Pro; 8 colors with two | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) |
| Enclosure | Yes, fully enclosed with LED lights | No, open frame |
| Auto leveling | Yes, LeviQ 3.0 with Z offset | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) |
| Max nozzle temp | 320 °C | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle |
| Heated bed | Yes, up to 120 °C, PEI spring steel plate | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) |
| Filament types | PLA, PETG, ABS, ASA, TPU 95A (single color only); FAQ also lists PC, PA and fiber filled | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU |
| Connectivity | Anycubic app, slicer software, USB drive | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) |
| Camera | Yes, 480P HD camera | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) |
| Noise | 46 dB or less standard, 44 dB or less quiet mode (Anycubic claim) | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode |
| Assembly | About 15 minutes from unboxing to first print (Anycubic claim) | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) |
| Weight | 18 kg printer, 4.6 kg ACE Pro | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) |
| Best for | easy multi color printing on a budget | beginners who want affordable 4 color PLA prints |
| Skip if | you want low waste or deep tuning | you need to print ABS, ASA or nylon |

## What reviewers found

### Anycubic Kobra S1 Combo

- TechRadar (4.5/5): Scored 27 of 30 on a print quality test with about 0.21 mm average X/Y error. A 43 minute single color print became a 14 hour multi color print. [Source](https://www.techradar.com/pro/anycubic-kobra-s1-combo-review)
- Notebookcheck: Measured 44 dB(A) at one meter. Quality was best up to about 200 mm/s, and nozzle cleaning plus purging caused significant waste. [Source](https://www.notebookcheck.net/A-splash-of-color-on-your-desk-Reviewing-the-Anycubic-Kobra-S1-Combo-Ace-Pro.1010199.0.html)

### Creality SPARKX i7

- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. [Source](https://www.tomshardware.com/3d-printing/creality-sparkx-i7-review)
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. [Source](https://www.cgmagonline.com/review/hardware/creality-sparkx-i7-3d-printer/)

## Questions buyers ask

### Which is better, the Anycubic Kobra S1 Combo or the Creality SPARKX i7?

The Anycubic Kobra S1 Combo scores higher in our ranking (8.5 vs 8.1 out of 10). Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.

### What is the difference between the Kobra S1 Combo and the SPARKX i7?

Build volume: 250 x 250 x 250 mm on the Kobra S1 Combo, 260 x 260 x 255 mm (Creality) on the SPARKX i7. Print speed: Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration on the Kobra S1 Combo, Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7. Multi color: Yes, 4 colors with one ACE Pro; 8 colors with two on the Kobra S1 Combo, Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7.

Full reviews: [Anycubic Kobra S1 Combo](https://robotsforthat.com/robot/anycubic-kobra-s1-combo/index.md), [Creality SPARKX i7](https://robotsforthat.com/robot/creality-sparkx-i7/index.md)