# Anycubic Kobra S1 Combo vs Flashforge AD5X

As of Oct 27, 2026, the Anycubic Kobra S1 Combo costs $399 and the Flashforge AD5X costs $349, so the Flashforge AD5X is $50 cheaper. The Anycubic Kobra S1 Combo has a published review score and ranks #1 in our 3D printers ranking; the Flashforge AD5X is not scored yet. Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. Pick the Flashforge AD5X for cheap 4 color printing in a small space.

Prices checked Oct 27, 2026. HTML version: https://robotsforthat.com/vs/anycubic-kobra-s1-combo-vs-flashforge-ad5x/

## Side by side

| | Anycubic Kobra S1 Combo | Flashforge AD5X |
|---|---|---|
| Price | $399 | $349 |
| 3 year cost | $399 | $349 |
| Our score | 7.9/10 | Not scored yet |
| Rank in 3D printers | #1 | #11 |
| Status | on sale | on sale |
| Warranty | 1 year | 1 year limited; 3 months on extruder parts |
| Build volume | 250 x 250 x 250 mm | 220 x 220 x 220 mm |
| Print speed | Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration | Up to 300 mm/s print, 600 mm/s travel, 20,000 mm/s² acceleration |
| Multi color | Yes, 4 colors with one ACE Pro; 8 colors with two | Yes, 4 colors with the built in IFS |
| Enclosure | Yes, fully enclosed with LED lights | No, open frame; DIY enclosure kit sold separately |
| Auto leveling | Yes, LeviQ 3.0 with Z offset | Yes, one click auto leveling |
| Max nozzle temp | 320 °C | 300 °C |
| Heated bed | Yes, up to 120 °C, PEI spring steel plate | Yes, up to 110 °C, PEI steel sheet |
| Filament types | PLA, PETG, ABS, ASA, TPU 95A (single color only); FAQ also lists PC, PA and fiber filled | PLA, PETG, TPU 95A, TPU 64D to 75D, PLA-CF, PETG-CF |
| Connectivity | Anycubic app, slicer software, USB drive | Wi-Fi, Ethernet, USB |
| Camera | Yes, 480P HD camera | None (Tom's Hardware notes no camera) |
| Noise | 46 dB or less standard, 44 dB or less quiet mode (Anycubic claim) | About 58 dB without the enclosure (ProToolReviews) |
| Assembly | About 15 minutes from unboxing to first print (Anycubic claim) | Three steps: screen, filament holder and multi color module |
| Weight | 18 kg printer, 4.6 kg ACE Pro | 11.4 kg (Tom's Hardware) |
| Best for | easy multi color printing on a budget | cheap 4 color printing in a small space |
| Skip if | you want low waste or deep tuning | you want a camera or enclosed printing |

## What reviewers found

### Anycubic Kobra S1 Combo

- TechRadar (4.5/5): Scored 27 of 30 on a print quality test with about 0.21 mm average X/Y error. A 43 minute single color print became a 14 hour multi color print. [Source](https://www.techradar.com/pro/anycubic-kobra-s1-combo-review)
- Notebookcheck: Measured 44 dB(A) at one meter. Quality was best up to about 200 mm/s, and nozzle cleaning plus purging caused significant waste. [Source](https://www.notebookcheck.net/A-splash-of-color-on-your-desk-Reviewing-the-Anycubic-Kobra-S1-Combo-Ace-Pro.1010199.0.html)

### Flashforge AD5X

- Tom's Hardware: Excellent print quality across PLA, PETG, TPU and ASA, but the Orca based slicer crashed about every third print. A 33 frog plate wasted 11 g over 23 color swaps. [Source](https://www.tomshardware.com/3d-printing/flashforge-ad5x-review)
- ProToolReviews: Called it a well rounded multicolor printer with sharp prints and reliable runs. Noted about 58 dB noise unless enclosed and suggested the optional enclosure. [Source](https://www.protoolreviews.com/flashforge-ad5x-3d-printer-review/)

## Questions buyers ask

### Which is better, the Anycubic Kobra S1 Combo or the Flashforge AD5X?

The Anycubic Kobra S1 Combo has a published review score and ranks #1 in our 3D printers ranking; the Flashforge AD5X is not scored yet. Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. Pick the Flashforge AD5X for cheap 4 color printing in a small space.

### Which is cheaper?

The Flashforge AD5X at $349, versus $399 for the Anycubic Kobra S1 Combo, checked Oct 27, 2026.

### What is the difference between the Kobra S1 Combo and the AD5X?

Build volume: 250 x 250 x 250 mm on the Kobra S1 Combo, 220 x 220 x 220 mm on the AD5X. Print speed: Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration on the Kobra S1 Combo, Up to 300 mm/s print, 600 mm/s travel, 20,000 mm/s² acceleration on the AD5X. Multi color: Yes, 4 colors with one ACE Pro; 8 colors with two on the Kobra S1 Combo, Yes, 4 colors with the built in IFS on the AD5X.

Full reviews: [Anycubic Kobra S1 Combo](https://robotsforthat.com/robot/anycubic-kobra-s1-combo/index.md), [Flashforge AD5X](https://robotsforthat.com/robot/flashforge-ad5x/index.md)