# Bambu Lab A2L vs Bambu Lab H2S

As of Nov 4, 2026, the Bambu Lab A2L costs $439 and the Bambu Lab H2S costs $1,049, so the Bambu Lab A2L is $610 cheaper. The Bambu Lab A2L scores higher in our ranking (7.5 vs 6.1 out of 10). Pick the Bambu Lab A2L for families and crafters who want large PLA prints and easy 4 color printing. Pick the Bambu Lab H2S for large prints and engineering filaments.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/bambu-lab-a2l-vs-bambu-lab-h2s/

## Side by side

| | Bambu Lab A2L | Bambu Lab H2S |
|---|---|---|
| Price | $439 | $1,049 |
| 3 year cost | $439 | $1,049 |
| Our score | 7.5/10 | 6.1/10 |
| Rank in 3D printers | #17 | #28 |
| Status | on sale | on sale |
| Warranty | Not checked | n/a |
| Build volume | 330 x 320 x 325 mm (Tom's Hardware, FauxHammer) | 340 x 320 x 340 mm (Bambu Lab) |
| Print speed | Up to 500 mm/s (Bambu Lab via FauxHammer); Tom's Hardware printed at the default 200 to 300 mm/s | Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) |
| Multi color | Yes, 4 colors with AMS Lite in the Combo; also works with AMS and AMS 2 Pro (Tom's Hardware) | Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament. CGMagazine says chained AMS units can hold 16 or more spools |
| Enclosure | No, open frame bed slinger (Tom's Hardware) | Yes, fully enclosed with active chamber heating up to 65 C (Bambu Lab) |
| Auto leveling | Yes, automatic with nozzle probe Z height (Tom's Hardware) | Yes, automatic calibration; first run calibration took about 30 minutes for The Gadgeteer |
| Max nozzle temp | 300 C, 0.4 mm quick swap stainless steel nozzle (Tom's Hardware, FauxHammer) | 350 C (Bambu Lab) |
| Heated bed | Yes, up to 80 C, textured PEI spring steel sheet (FauxHammer) | Yes, up to 120 C (CGMagazine, The Gadgeteer) |
| Filament types | PLA, PETG, TPU (Tom's Hardware); no ABS or ASA profile at the time of FauxHammer's test | PLA, PETG, TPU, ABS, ASA, PC, PPA, PA6 GF, PAHT CF and other fiber filled engineering filaments (Bambu Lab) |
| Connectivity | Wi-Fi, microSD (Tom's Hardware) | Cloud, LAN, full offline mode, USB drive (not included); MQTT access in Developer Mode (Bambu Lab) |
| Camera | Conflicting: Tom's Hardware says no camera; FauxHammer lists an included camera with a feed of about 1 frame per second | Yes, 3 cameras including a top down BirdsEye camera and a toolhead camera, with AI failure detection (Bambu Lab) |
| Weight | 12.8 kg; 544 x 529 x 505 mm (Tom's Hardware) | 30 kg printer alone, 40.7 kg AMS combo (The Gadgeteer) |
| Extras | Optional blade cutter and pen plotter kit, $69 (Tom's Hardware) | n/a |
| Noise | Not measured in the reviews we checked; Tom's Hardware found strong vibration on a light table | Below 50 dB (Bambu Lab claim, measured at 1 m) |
| Assembly | n/a | Ships assembled; CGMagazine says unboxing needs two people and setup with calibration can take more than 30 minutes |
| Best for | families and crafters who want large PLA prints and easy 4 color printing | large prints and engineering filaments |
| Skip if | you want to print ABS or ASA, or only have a light table | you print lots of multi color models |

## What reviewers found

### Bambu Lab A2L

- Tom's Hardware: Editor's Choice. A Flexi panda took 2 h 40 min in one color and 6 h 46 min in three colors. A TPU 95A bag printed in 7 h 9 min. A PETG spinner failed near 95% due to a thin base. The AMS Lite vibrated off an IKEA Lack table after 45 minutes. [Source](https://tomshardware.com/3d-printing/bambu-lab-a2l-3d-printer-review)
- FauxHammer (4/5): Called it a great hobby printer with good print quality for its class, but found the live camera feed about 1 frame per second and no ABS or ASA profile at test time. [Source](https://www.fauxhammer.com/fr/?p=36300)

### Bambu Lab H2S

- CGMagazine (8/10): Called it refined and reliable. Real world print times were about 20 to 30% shorter than typical fast CoreXY profiles and aggregated XY error measured under 0.5 mm. Multi color prints ran a few hours longer than on the H2D on day long jobs, with considerable purge waste. [Source](https://www.cgmagonline.com/review/hardware/bambu-lab-h2s-3d-printer)
- The Gadgeteer: Ran the H2S AMS 2 Pro combo for about a month, often around the clock. First calibration took about 30 minutes, PETG CF prints finished well and the AMS 2 Pro was nearly error free. Downsides were purge waste on multi color jobs and the pricey optional Vision Encoder. [Source](https://the-gadgeteer.com/?p=485726)

## Questions buyers ask

### Which is better, the Bambu Lab A2L or the Bambu Lab H2S?

The Bambu Lab A2L scores higher in our ranking (7.5 vs 6.1 out of 10). Pick the Bambu Lab A2L for families and crafters who want large PLA prints and easy 4 color printing. Pick the Bambu Lab H2S for large prints and engineering filaments.

### Which is cheaper?

The Bambu Lab A2L at $439, versus $1,049 for the Bambu Lab H2S, checked Nov 4, 2026.

### What is the difference between the A2L and the H2S?

Build volume: 330 x 320 x 325 mm (Tom's Hardware, FauxHammer) on the A2L, 340 x 320 x 340 mm (Bambu Lab) on the H2S. Print speed: Up to 500 mm/s (Bambu Lab via FauxHammer); Tom's Hardware printed at the default 200 to… on the A2L, Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) on the H2S. Multi color: Yes, 4 colors with AMS Lite in the Combo; also works with AMS and AMS 2 Pro (Tom's… on the A2L, Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament… on the H2S.

Full reviews: [Bambu Lab A2L](https://robotsforthat.com/robot/bambu-lab-a2l/index.md), [Bambu Lab H2S](https://robotsforthat.com/robot/bambu-lab-h2s/index.md)