# Bambu Lab H2C vs Snapmaker U1

As of Nov 4, 2026, the Bambu Lab H2C costs $1,859 and the Snapmaker U1 costs $699, so the Snapmaker U1 is $1,160 cheaper. The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Bambu Lab H2C is not scored yet. Pick the Bambu Lab H2C for makers who print a lot of multi color or multi material parts. Pick the Snapmaker U1 for fast multi color with little waste.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/bambu-lab-h2c-vs-snapmaker-u1/

## Side by side

| | Bambu Lab H2C | Snapmaker U1 |
|---|---|---|
| Price | $1,859 | $699 |
| 3 year cost | $1,859 | $699 |
| Our score | Not scored yet | 7.3/10 |
| Rank in 3D printers | #49 | #19 |
| Status | on sale | on sale |
| Warranty | Not checked | 1 year in the US for machines and modules (Snapmaker US store) |
| Build volume | 305 x 320 x 325 mm single nozzle, 300 x 320 x 325 mm dual nozzle, 330 x 320 x 325 mm total (Bambu Lab) | 270 x 270 x 270 mm (Snapmaker) |
| Print speed | No max speed listed by Bambu Lab; Tom's Hardware printed a speed Benchy in 16 min 37 s | Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) |
| Multi color | Yes, AMS 2 Pro included; Vortek rack of 6 induction hotends plus a second nozzle. Tom's Hardware found swaps about twice as fast as other Bambu AMS printers | Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and about 5 s for TechRadar, with very low purge waste |
| Enclosure | Yes, enclosed with active chamber heating to 65 C and air purification (Bambu Lab) | No, semi open; optional Top Cover sold separately for ABS, ASA, PA and PC (Snapmaker) |
| Auto leveling | Yes, hands free automatic leveling; first self check took about 45 minutes (Tom's Hardware) | Yes, mesh bed leveling and automatic toolhead offset calibration (Snapmaker) |
| Max nozzle temp | 350 C; hotends heat in about 8 s (Bambu Lab) | 300 C, 0.4 mm stainless steel nozzles (Snapmaker) |
| Heated bed | Yes, up to 120 C, textured PEI plate (Bambu Lab, Tom's Hardware) | Yes, up to 100 C, flexible PEI plate (Snapmaker, TechRadar) |
| Filament types | PLA, PETG, TPU, ABS, ASA and high temp filaments up to 350 C such as PPS (Tom's Hardware); TPU handling was cumbersome | PLA, PETG, TPU, PVA, PCTG; PET, ABS, ASA, PA, PC with the Top Cover; carbon and glass fiber blends also need a hardened nozzle (Snapmaker) |
| Connectivity | Wi-Fi, LAN, USB stick (Tom's Hardware) | Wi-Fi (2.4 GHz), USB flash drive (Snapmaker); Tom's Hardware also lists LAN. Klipper firmware, OrcaSlicer support |
| Camera | Yes, live view, nozzle and toolhead cameras at 1080p; 8 MP BirdsEye camera (Bambu Lab) | Yes, 2 MP chamber camera (Snapmaker); both reviewers hit an early bug where it did not work with Orca |
| Noise | n/a | No dB figure; TechRadar found it much quieter than competing multi filament machines |
| Assembly | First self check and leveling took about 45 minutes (Tom's Hardware) | Setup takes 15 to 30 minutes (TechRadar) |
| Weight | 32.5 kg; 492 x 514 x 626 mm (Tom's Hardware) | 18.2 kg; 584 x 499 x 730 mm (Snapmaker) |
| Best for | makers who print a lot of multi color or multi material parts | fast multi color with little waste |
| Skip if | you mostly print one color or one material | you mostly print single color parts |

## What reviewers found

### Bambu Lab H2C

- Tom's Hardware: Editor's Choice. A five color castle took 11 h 13 min with a 41 g purge tower and no other waste, versus 23 h 30 min and 279 g of waste on the H2D. Prusa XL did it in 6 h. [Source](https://tomshardware.com/3d-printing/bambu-lab-h2c-review)
- Hackster: The same multi color job took 4 h 05 min and 111 g of filament on the H2C versus 5 h 28 min and 145 g on the H2D. A 275 mm test plate measured 274.44 mm before calibration. [Source](https://www.hackster.io/news/the-maker-s-toolbox-bambu-lab-h2c-3d-printer-review-8d2e610d5b5f)

### Snapmaker U1

- Tom's Hardware: Editor's Choice. Tool swaps took about 10 to 12 s versus about 90 s on Bambu Lab. A PLA spiders print took 3 h 20 min with 4.4 g of purge waste, where a P1P took about 2 hours longer and used about 25 g more. A multicolor lettering print wasted just 0.76 g. [Source](https://www.tomshardware.com/3d-printing/snapmaker-u1-review)
- TechRadar (4.5/5): Scored 4.5 out of 5 with average dimensional error of 0.056 mm. Tool changes took about 5 s and multi color prints ran two to three times faster than before; a robot tortoise finished in under a day versus 36 hours previously. Cons were add ons needed for some materials and early connectivity bugs. [Source](https://www.techradar.com/pro/snapmaker-u1-3d-printer-review)

## Questions buyers ask

### Which is better, the Bambu Lab H2C or the Snapmaker U1?

The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Bambu Lab H2C is not scored yet. Pick the Bambu Lab H2C for makers who print a lot of multi color or multi material parts. Pick the Snapmaker U1 for fast multi color with little waste.

### Which is cheaper?

The Snapmaker U1 at $699, versus $1,859 for the Bambu Lab H2C, checked Nov 4, 2026.

### What is the difference between the H2C and the U1?

Build volume: 305 x 320 x 325 mm single nozzle, 300 x 320 x 325 mm dual nozzle, 330 x 320 x 325 mm… on the H2C, 270 x 270 x 270 mm (Snapmaker) on the U1. Print speed: No max speed listed by Bambu Lab; Tom's Hardware printed a speed Benchy in 16 min 37 s on the H2C, Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) on the U1. Multi color: Yes, AMS 2 Pro included; Vortek rack of 6 induction hotends plus a second nozzle. Tom's… on the H2C, Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and… on the U1.

Full reviews: [Bambu Lab H2C](https://robotsforthat.com/robot/bambu-lab-h2c/index.md), [Snapmaker U1](https://robotsforthat.com/robot/snapmaker-u1/index.md)