# Bambu Lab H2D vs Prusa Research CORE One+ (Gen 2)

As of Oct 27, 2026, the Bambu Lab H2D costs $1,549 and the Prusa Research CORE One+ (Gen 2) costs $1,299, so the Prusa Research CORE One+ (Gen 2) is $250 cheaper. The Prusa Research CORE One+ (Gen 2) scores higher in our ranking (6.5 vs 6.3 out of 10). Pick the Bambu Lab H2D for makers and small shops that want two materials per print. Pick the Prusa Research CORE One+ (Gen 2) for makers who want an open, repairable enclosed printer.

Prices checked Oct 27, 2026. HTML version: https://robotsforthat.com/vs/bambu-lab-h2d-vs-prusa-core-one-plus/

## Side by side

| | Bambu Lab H2D | Prusa Research CORE One+ (Gen 2) |
|---|---|---|
| Price | $1,549 | $1,299 |
| 3 year cost | $1,549 | $1,299 |
| Our score | 6.3/10 | 6.5/10 |
| Rank in 3D printers | #5 | #4 |
| Status | on sale | on sale |
| Warranty | 2 years (Bambu Lab US store product page) | 1 year for buyers outside the EU, including the US (Prusa knowledge base) |
| Build volume | 325 x 320 x 325 mm single nozzle; 300 x 320 x 325 mm dual nozzle; 350 x 320 x 325 mm total | 250 x 220 x 270 mm |
| Print speed | 600 mm/s with Bambu PLA Matte (Bambu Lab claim) | No max speed published; Tom's Hardware measured about 15 to 20% faster than the MK4S at default settings |
| Multi color | Dual nozzles plus up to 4 AMS 2 Pro and 8 AMS HT units, up to 25 colors; not compatible with AMS lite | Optional MMU3 (5 filaments) or INDX toolchanger (up to 8 filaments) |
| Enclosure | Yes, with active chamber heating up to 65 C | Yes, with active chamber heating up to 55 C |
| Auto leveling | Yes, automated calibration; optional Vision Encoder for 50 micron motion accuracy | Yes, fully automatic first layer calibration with a load cell sensor |
| Max nozzle temp | 350 C, hardened steel nozzles | 290 C (400 C with the HT hotend) |
| Filament types | Wide range including PLA, PETG, TPU, PAHT-CF, PPS and PPA-CF; Bambu Lab recommends specific hotends for TPU and PPS or PPA-CF | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; advanced: ABS, ASA, HIPS, PA |
| Connectivity | Printer has built in storage; LAN printing, timelapse and recording need a USB drive (not included) | Ethernet and Wi-Fi, NFC, USB drive, Prusa Connect and Prusa app |
| Camera | Yes, AI nozzle camera with macro lens; BirdsEye camera on Laser editions | Optional in chamber camera |
| Assembly | Initial calibration took about 45 minutes in Tom's Hardware testing; laser upgrade is self installed | Sold assembled or as a kit |
| Weight | 31 kg net; 492 x 514 x 626 mm | 22.5 kg; 415 x 444 x 555 mm |
| Heated bed | n/a | Yes, up to 120 C |
| Noise | n/a | Tom's Hardware found it very quiet, though the motion system is a bit louder than the MK4S |
| Best for | makers and small shops that want two materials per print | makers who want an open, repairable enclosed printer |
| Skip if | you mostly print PLA and want to spend less | you want multi color or a camera included |

## What reviewers found

### Bambu Lab H2D

- Tom's Hardware (Editor's Choice): Called it one of the best printers they had seen. A two color print of 114 parts took 8 h 4 min with about 2.6 g of purge and prime tower waste, versus 6.54 g on a P1P. A Benchy took 21 min 30 s. [Source](https://www.tomshardware.com/3d-printing/bambu-lab-h2d-review)
- TechRadar (4.5/5): Scored 28 of 30 in both print tests. A two filament print took 5 h 27 min versus over 12 hours on an X1C. Noted a small laser work area and an AI camera that can pause prints too readily. [Source](https://www.techradar.com/pro/bambu-lab-h2d-review)

### Prusa Research CORE One+ (Gen 2)

- Tom's Hardware (Editor's Choice): Tested the original CORE One. It ran about 15 to 20% faster than the MK4S and printed a speed Benchy in 28 minutes. A five color MMU3 print took 14 h 32 min with 100 g of waste, versus 20 h 57 min and 264 g on the H2D. [Source](https://www.tomshardware.com/3d-printing/prusa-core-one-review)
- CGMagazine (9/10): Tested the original CORE One and called it one of the best printers the reviewer had used. It was quiet in an office and handled ABS and ASA in the enclosure. Missing out of the box multi color and better camera hardware. [Source](https://www.cgmagonline.com/review/hardware/prusa-core-one-3d-printer/)

## Questions buyers ask

### Which is better, the Bambu Lab H2D or the Prusa Research CORE One+ (Gen 2)?

The Prusa Research CORE One+ (Gen 2) scores higher in our ranking (6.5 vs 6.3 out of 10). Pick the Bambu Lab H2D for makers and small shops that want two materials per print. Pick the Prusa Research CORE One+ (Gen 2) for makers who want an open, repairable enclosed printer.

### Which is cheaper?

The Prusa Research CORE One+ (Gen 2) at $1,299, versus $1,549 for the Bambu Lab H2D, checked Oct 27, 2026.

### What is the difference between the H2D and the CORE One+ (Gen 2)?

Build volume: 325 x 320 x 325 mm single nozzle; 300 x 320 x 325 mm dual nozzle; 350 x 320 x 325 mm total on the H2D, 250 x 220 x 270 mm on the CORE One+ (Gen 2). Print speed: 600 mm/s with Bambu PLA Matte (Bambu Lab claim) on the H2D, No max speed published; Tom's Hardware measured about 15 to 20% faster than the MK4S at… on the CORE One+ (Gen 2). Multi color: Dual nozzles plus up to 4 AMS 2 Pro and 8 AMS HT units, up to 25 colors; not compatible… on the H2D, Optional MMU3 (5 filaments) or INDX toolchanger (up to 8 filaments) on the CORE One+ (Gen 2).

Full reviews: [Bambu Lab H2D](https://robotsforthat.com/robot/bambu-lab-h2d/index.md), [Prusa Research CORE One+ (Gen 2)](https://robotsforthat.com/robot/prusa-core-one-plus/index.md)