# Bambu Lab H2S vs Creality K2 Plus Combo

As of Nov 4, 2026, the Bambu Lab H2S costs $1,049 and the Creality K2 Plus Combo costs $1,199, so the Bambu Lab H2S is $150 cheaper. The Creality K2 Plus Combo scores higher in our ranking (6.6 vs 6.1 out of 10). Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K2 Plus Combo for large multi color and engineering prints.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/bambu-lab-h2s-vs-creality-k2-plus-combo/

## Side by side

| | Bambu Lab H2S | Creality K2 Plus Combo |
|---|---|---|
| Price | $1,049 | $1,199 |
| 3 year cost | $1,049 | $1,199 |
| Our score | 6.1/10 | 6.6/10 |
| Rank in 3D printers | #28 | #24 |
| Status | on sale | on sale |
| Warranty | n/a | Up to 12 months (Creality store) |
| Build volume | 340 x 320 x 340 mm (Bambu Lab) | 350 x 350 x 350 mm |
| Print speed | Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) | Up to 600 mm/s, 30,000 mm/s² acceleration |
| Multi color | Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament. CGMagazine says chained AMS units can hold 16 or more spools | Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units |
| Enclosure | Yes, fully enclosed with active chamber heating up to 65 C (Bambu Lab) | Yes, with active chamber heating to 60 °C and air purifier |
| Auto leveling | Yes, automatic calibration; first run calibration took about 30 minutes for The Gadgeteer | Yes, full auto leveling with strain gauge and bed tilt calibration |
| Max nozzle temp | 350 C (Bambu Lab) | 350 °C |
| Heated bed | Yes, up to 120 C (CGMagazine, The Gadgeteer) | Yes, up to 120 °C |
| Filament types | PLA, PETG, TPU, ABS, ASA, PC, PPA, PA6 GF, PAHT CF and other fiber filled engineering filaments (Bambu Lab) | PLA, PETG, ABS, ASA, PC, PA, TPU, PLA-CF, PA-CF, PPA-CF, PPS and more (CFS does not feed TPU) |
| Connectivity | Cloud, LAN, full offline mode, USB drive (not included); MQTT access in Developer Mode (Bambu Lab) | Dual band Wi-Fi, Ethernet, USB drive |
| Camera | Yes, 3 cameras including a top down BirdsEye camera and a toolhead camera, with AI failure detection (Bambu Lab) | Yes, two AI cameras (tool head and chamber) |
| Noise | Below 50 dB (Bambu Lab claim, measured at 1 m) | 45 dB or less at 300 mm/s (Creality claim) |
| Assembly | Ships assembled; CGMagazine says unboxing needs two people and setup with calibration can take more than 30 minutes | Pre assembled; install the screen and set up |
| Weight | 30 kg printer alone, 40.7 kg AMS combo (The Gadgeteer) | 35 kg printer, 4.56 kg CFS |
| Best for | large prints and engineering filaments | large multi color and engineering prints |
| Skip if | you print lots of multi color models | you have limited desk space or budget |

## What reviewers found

### Bambu Lab H2S

- CGMagazine (8/10): Called it refined and reliable. Real world print times were about 20 to 30% shorter than typical fast CoreXY profiles and aggregated XY error measured under 0.5 mm. Multi color prints ran a few hours longer than on the H2D on day long jobs, with considerable purge waste. [Source](https://www.cgmagonline.com/review/hardware/bambu-lab-h2s-3d-printer)
- The Gadgeteer: Ran the H2S AMS 2 Pro combo for about a month, often around the clock. First calibration took about 30 minutes, PETG CF prints finished well and the AMS 2 Pro was nearly error free. Downsides were purge waste on multi color jobs and the pricey optional Vision Encoder. [Source](https://the-gadgeteer.com/?p=485726)

### Creality K2 Plus Combo

- Tom's Hardware: Editor's Choice. Benchy in 15 min 56 s; a three color dragon finished 56 minutes faster than a Bambu Lab P1P but made 121.7 g of purge waste versus 99 g. TPU jammed in the CFS. [Source](https://www.tomshardware.com/3d-printing/creality-k2-plus-review)
- TechRadar (4.5/5): Scored 24 of 30 on a print quality test and measured about 45 dB at 300 mm/s. A four color Benchy took about 8.5 hours versus about 30 minutes in one color. [Source](https://www.techradar.com/pro/creality-k2-plus-review)

## Questions buyers ask

### Which is better, the Bambu Lab H2S or the Creality K2 Plus Combo?

The Creality K2 Plus Combo scores higher in our ranking (6.6 vs 6.1 out of 10). Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K2 Plus Combo for large multi color and engineering prints.

### Which is cheaper?

The Bambu Lab H2S at $1,049, versus $1,199 for the Creality K2 Plus Combo, checked Nov 4, 2026.

### What is the difference between the H2S and the K2 Plus Combo?

Build volume: 340 x 320 x 340 mm (Bambu Lab) on the H2S, 350 x 350 x 350 mm on the K2 Plus Combo. Print speed: Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) on the H2S, Up to 600 mm/s, 30,000 mm/s² acceleration on the K2 Plus Combo. Multi color: Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament… on the H2S, Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units on the K2 Plus Combo.

Full reviews: [Bambu Lab H2S](https://robotsforthat.com/robot/bambu-lab-h2s/index.md), [Creality K2 Plus Combo](https://robotsforthat.com/robot/creality-k2-plus-combo/index.md)