# Bambu Lab P2S vs Flashforge Adventurer 5M Pro

As of Nov 4, 2026, the Bambu Lab P2S costs $449 and the Flashforge Adventurer 5M Pro costs $569, so the Bambu Lab P2S is $120 cheaper. The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Bambu Lab P2S is not scored yet. Pick the Bambu Lab P2S for a first enclosed printer that just works. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/bambu-lab-p2s-vs-flashforge-adventurer-5m-pro/

## Side by side

| | Bambu Lab P2S | Flashforge Adventurer 5M Pro |
|---|---|---|
| Price | $449 | $569 |
| 3 year cost | $449 | $569 |
| Our score | Not scored yet | 7.9/10 |
| Rank in 3D printers | #40 | #12 |
| Status | on sale | on sale |
| Warranty | n/a | 1 year limited on the printer, 3 months on extruder parts (Flashforge) |
| Build volume | 256 x 256 x 256 mm (Bambu Lab) | 220 x 220 x 220 mm (Flashforge) |
| Print speed | Up to 600 mm/s, 20,000 mm/s2 acceleration (Tom's Hardware spec table) | Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice |
| Multi color | Yes with AMS 2 Pro, included in the Combo; Tom's Hardware notes the AMS wastes filament on color changes | No, single filament |
| Enclosure | Yes, enclosed chamber with active airflow; no active chamber heating. Tom's Hardware saw about 33 C inside | Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com) |
| Auto leveling | Yes, automatic bed leveling and Auto Flow Dynamics calibration with an eddy current sensor (Bambu Lab) | Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives) |
| Max nozzle temp | 300 C (Bambu Lab) | 280 C (Flashforge) |
| Heated bed | Yes, up to 110 C (Bambu Lab) | Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C |
| Filament types | PLA, PETG, TPU, ABS, PC and carbon fiber blends; Tom's Hardware printed PLA, PETG CF, ABS and TPU | PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge) |
| Connectivity | Wi-Fi, Bluetooth, USB (Tom's Hardware) | Wi-Fi, Ethernet, USB (Flashforge) |
| Camera | Yes, 1080p high frame rate camera with spaghetti failure detection (Bambu Lab, Hackster) | Yes, built in camera for monitoring (Flashforge) |
| Noise | n/a | Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min |
| Assembly | Ships assembled; tool free quick swap hotend | About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives) |
| Weight | 14.9 kg; 392 x 406 x 478 mm (Tom's Hardware) | 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed |
| Best for | a first enclosed printer that just works | enclosed printing in small spaces |
| Skip if | you need a heated chamber | you need large or multi color prints |

## What reviewers found

### Bambu Lab P2S

- Tom's Hardware: Editor's Choice. A 20 hour PETG carbon fiber game board, a 3 h 12 min ABS top and a 6 h 46 min TPU handbag on a 0.8 mm nozzle all printed without clogs. Chamber held about 33 C. The only con listed was AMS filament waste. [Source](https://www.tomshardware.com/3d-printing/bambu-lab-p2s-review)
- Hackster: Called it a new generation of the P1S rather than a new model. Liked the touchscreen, better camera with failure detection and tool free nozzle swaps, but saw no clear print quality gain over the P1S and noted no active chamber heating. [Source](https://www.hackster.io/news/the-maker-s-toolbox-bambu-lab-p2s-3d-printer-review-eca6a5fddab6)

### Flashforge Adventurer 5M Pro

- 3DPrint.com: A full volume ASA print took 24 h 44 min with no warping and a 100 mm cube measured 99.70 x 99.71 x 100.02 mm. Measured 68 dB average and 79 dB max. Ran with 100% uptime over a month; TPU needed 30 to 40 mm/s. [Source](https://3dprint.com/312375/flashforge-adventurer-5m-pro-review-a-compact-powerhouse-for-3d-printing/amp/)
- 3Dnatives (9.5/10): Scored 9.5/10 with 10/10 for print quality. Auto calibration took about 15 minutes with no manual input. Cons were a confusing slicer transition, small build volume, no multi material and a rear mounted spool. [Source](https://www.3dnatives.com/en/3dnatives-lab-adventurer-5m-pro-3d-printer-flashforge-200620244/)

## Questions buyers ask

### Which is better, the Bambu Lab P2S or the Flashforge Adventurer 5M Pro?

The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Bambu Lab P2S is not scored yet. Pick the Bambu Lab P2S for a first enclosed printer that just works. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces.

### Which is cheaper?

The Bambu Lab P2S at $449, versus $569 for the Flashforge Adventurer 5M Pro, checked Nov 4, 2026.

### What is the difference between the P2S and the Adventurer 5M Pro?

Build volume: 256 x 256 x 256 mm (Bambu Lab) on the P2S, 220 x 220 x 220 mm (Flashforge) on the Adventurer 5M Pro. Print speed: Up to 600 mm/s, 20,000 mm/s2 acceleration (Tom's Hardware spec table) on the P2S, Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to… on the Adventurer 5M Pro. Multi color: Yes with AMS 2 Pro, included in the Combo; Tom's Hardware notes the AMS wastes filament… on the P2S, No, single filament on the Adventurer 5M Pro.

Full reviews: [Bambu Lab P2S](https://robotsforthat.com/robot/bambu-lab-p2s/index.md), [Flashforge Adventurer 5M Pro](https://robotsforthat.com/robot/flashforge-adventurer-5m-pro/index.md)