# Bambu Lab X2D vs Snapmaker U1

As of Nov 4, 2026, the Bambu Lab X2D costs $589 and the Snapmaker U1 costs $699, so the Bambu Lab X2D is $110 cheaper. The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Bambu Lab X2D is not scored yet. Pick the Bambu Lab X2D for makers who want two materials or colors with little waste and engineering filament support. Pick the Snapmaker U1 for fast multi color with little waste.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/bambu-lab-x2d-vs-snapmaker-u1/

## Side by side

| | Bambu Lab X2D | Snapmaker U1 |
|---|---|---|
| Price | $589 | $699 |
| 3 year cost | $589 | $699 |
| Our score | Not scored yet | 7.3/10 |
| Rank in 3D printers | #45 | #19 |
| Status | on sale | on sale |
| Warranty | Not checked | 1 year in the US for machines and modules (Snapmaker US store) |
| Build volume | 256 x 256 x 260 mm with one nozzle; height drops 4 mm when the second nozzle is used (TechRadar); Tom's Hardware lists 256 x 256 x 256 mm | 270 x 270 x 270 mm (Snapmaker) |
| Print speed | Up to 1,000 mm/s on the main direct drive head, 20,000 mm/s2 acceleration (Bambu Lab via Tom's Hardware); the Bowden auxiliary nozzle tops out at 200 mm/s (TechRadar) | Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) |
| Multi color | Yes, two nozzles plus AMS 2 Pro in the Combo, 4 to 16 colors with extra AMS units (Tom's Hardware); a two color zebra print purged only 11.5 g (Tom's Hardware) | Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and about 5 s for TechRadar, with very low purge waste |
| Enclosure | Yes, fully enclosed with active chamber heating to 65 C and G3, H12 HEPA and carbon filters (TechRadar) | No, semi open; optional Top Cover sold separately for ABS, ASA, PA and PC (Snapmaker) |
| Auto leveling | Yes, automatic bed leveling (Tom's Hardware); first calibration took 30 to 40 minutes (TechRadar) | Yes, mesh bed leveling and automatic toolhead offset calibration (Snapmaker) |
| Max nozzle temp | 300 C, two 0.4 mm hardened steel nozzles (TechRadar) | 300 C, 0.4 mm stainless steel nozzles (Snapmaker) |
| Heated bed | Yes, up to 120 C, textured PEI plate (TechRadar) | Yes, up to 100 C, flexible PEI plate (Snapmaker, TechRadar) |
| Filament types | PLA, PETG, TPU, ABS, ASA, PC, PA and fiber filled filaments (Tom's Hardware); soft TPU is poorly supported by the AMS and the auxiliary nozzle (Tom's Hardware) | PLA, PETG, TPU, PVA, PCTG; PET, ABS, ASA, PA, PC with the Top Cover; carbon and glass fiber blends also need a hardened nozzle (Snapmaker) |
| Connectivity | Wi-Fi, Bluetooth, USB, LAN and cloud printing (Tom's Hardware); no USB stick included | Wi-Fi (2.4 GHz), USB flash drive (Snapmaker); Tom's Hardware also lists LAN. Klipper firmware, OrcaSlicer support |
| Camera | Yes, 1080p with AI spaghetti and nozzle blob detection (Tom's Hardware) | Yes, 2 MP chamber camera (Snapmaker); both reviewers hit an early bug where it did not work with Orca |
| Weight | 16.25 kg; 392 x 406 x 478 mm (Tom's Hardware, TechRadar) | 18.2 kg; 584 x 499 x 730 mm (Snapmaker) |
| Noise | Not measured in the reviews we checked | No dB figure; TechRadar found it much quieter than competing multi filament machines |
| Assembly | n/a | Setup takes 15 to 30 minutes (TechRadar) |
| Best for | makers who want two materials or colors with little waste and engineering filament support | fast multi color with little waste |
| Skip if | you mainly print soft TPU or want the fastest multi material printing (look at the H2D) | you mostly print single color parts |

## What reviewers found

### Bambu Lab X2D

- Tom's Hardware: Editor's Choice. A calibration cube took 20 min 35 s on the main nozzle and 41 min 59 s on the auxiliary nozzle. A two color zebra herd took 13 h 54 min with 11.5 g of purge, saving about 101 g versus single nozzle printing. Extrusion force measured 8.5 kg. [Source](https://www.tomshardware.com/3d-printing/bambu-lab-x2d-review)
- TechRadar: Over 250 hours of printing with only a couple of stops, mostly from plate debris. Average XY error 0.188 mm. Print quality tests scored 29/30. Swapping both nozzles took under 5 minutes. [Source](https://www.techradar.com/pro/bambu-lab-x2d-3d-printer-review)

### Snapmaker U1

- Tom's Hardware: Editor's Choice. Tool swaps took about 10 to 12 s versus about 90 s on Bambu Lab. A PLA spiders print took 3 h 20 min with 4.4 g of purge waste, where a P1P took about 2 hours longer and used about 25 g more. A multicolor lettering print wasted just 0.76 g. [Source](https://www.tomshardware.com/3d-printing/snapmaker-u1-review)
- TechRadar (4.5/5): Scored 4.5 out of 5 with average dimensional error of 0.056 mm. Tool changes took about 5 s and multi color prints ran two to three times faster than before; a robot tortoise finished in under a day versus 36 hours previously. Cons were add ons needed for some materials and early connectivity bugs. [Source](https://www.techradar.com/pro/snapmaker-u1-3d-printer-review)

## Questions buyers ask

### Which is better, the Bambu Lab X2D or the Snapmaker U1?

The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Bambu Lab X2D is not scored yet. Pick the Bambu Lab X2D for makers who want two materials or colors with little waste and engineering filament support. Pick the Snapmaker U1 for fast multi color with little waste.

### Which is cheaper?

The Bambu Lab X2D at $589, versus $699 for the Snapmaker U1, checked Nov 4, 2026.

### What is the difference between the X2D and the U1?

Build volume: 256 x 256 x 260 mm with one nozzle; height drops 4 mm when the second nozzle is used… on the X2D, 270 x 270 x 270 mm (Snapmaker) on the U1. Print speed: Up to 1,000 mm/s on the main direct drive head, 20,000 mm/s2 acceleration (Bambu Lab via… on the X2D, Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) on the U1. Multi color: Yes, two nozzles plus AMS 2 Pro in the Combo, 4 to 16 colors with extra AMS units (Tom's… on the X2D, Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and… on the U1.

Full reviews: [Bambu Lab X2D](https://robotsforthat.com/robot/bambu-lab-x2d/index.md), [Snapmaker U1](https://robotsforthat.com/robot/snapmaker-u1/index.md)