# Creality Ender-3 V3 SE vs Creality K2 Plus Combo

As of Oct 27, 2026, the Creality Ender-3 V3 SE costs $179 and the Creality K2 Plus Combo costs $1,199, so the Creality Ender-3 V3 SE is $1,020 cheaper. The Creality K2 Plus Combo has a published review score and ranks #3 in our 3D printers ranking; the Creality Ender-3 V3 SE is not scored yet. Pick the Creality Ender-3 V3 SE for first time buyers on a tight budget. Pick the Creality K2 Plus Combo for large multi color and engineering prints.

Prices checked Oct 27, 2026. HTML version: https://robotsforthat.com/vs/creality-ender-3-v3-se-vs-creality-k2-plus-combo/

## Side by side

| | Creality Ender-3 V3 SE | Creality K2 Plus Combo |
|---|---|---|
| Price | $179 | $1,199 |
| 3 year cost | $179 | $1,199 |
| Our score | Not scored yet | 6.8/10 |
| Rank in 3D printers | #6 | #3 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store) | Up to 12 months (Creality store) |
| Build volume | 220 x 220 x 250 mm | 350 x 350 x 350 mm |
| Print speed | Up to 250 mm/s (180 mm/s typical), 2,500 mm/s² acceleration | Up to 600 mm/s, 30,000 mm/s² acceleration |
| Multi color | No, single color | Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units |
| Enclosure | No, open frame | Yes, with active chamber heating to 60 °C and air purifier |
| Auto leveling | Yes, CR Touch auto leveling with strain sensor auto Z offset | Yes, full auto leveling with strain gauge and bed tilt calibration |
| Max nozzle temp | 260 °C | 350 °C |
| Heated bed | Yes, up to 100 °C | Yes, up to 120 °C |
| Filament types | PLA, PETG, TPU 95A | PLA, PETG, ABS, ASA, PC, PA, TPU, PLA-CF, PA-CF, PPA-CF, PPS and more (CFS does not feed TPU) |
| Connectivity | SD card; no Wi-Fi per Tom's Hardware | Dual band Wi-Fi, Ethernet, USB drive |
| Camera | None | Yes, two AI cameras (tool head and chamber) |
| Assembly | About 90% pre built; about 15 to 20 minutes to finish | Pre assembled; install the screen and set up |
| Weight | 7.12 kg net | 35 kg printer, 4.56 kg CFS |
| Noise | n/a | 45 dB or less at 300 mm/s (Creality claim) |
| Best for | first time buyers on a tight budget | large multi color and engineering prints |
| Skip if | you want Wi-Fi, a camera or ABS | you have limited desk space or budget |

## What reviewers found

### Creality Ender-3 V3 SE

- Tom's Hardware: A Benchy took 41 minutes with no ringing or layer shifts. PETG and TPU printed cleanly. The reviewer found the PC coated plate too sticky and hard to clean. [Source](https://www.tomshardware.com/reviews/creality-ender-3-v3-se)
- How To Mechatronics: Benchy times dropped from 1 h 10 min at 60 mm/s to 37 min at 250 mm/s, with quality holding well at 120 mm/s. Noted slow heating and no runout sensor. [Source](https://howtomechatronics.com/tools/reviews/creality-ender-3-v3-se-review-with-test-prints-outstanding-value/)

### Creality K2 Plus Combo

- Tom's Hardware: Editor's Choice. Benchy in 15 min 56 s; a three color dragon finished 56 minutes faster than a Bambu Lab P1P but made 121.7 g of purge waste versus 99 g. TPU jammed in the CFS. [Source](https://www.tomshardware.com/3d-printing/creality-k2-plus-review)
- TechRadar (4.5/5): Scored 24 of 30 on a print quality test and measured about 45 dB at 300 mm/s. A four color Benchy took about 8.5 hours versus about 30 minutes in one color. [Source](https://www.techradar.com/pro/creality-k2-plus-review)

## Questions buyers ask

### Which is better, the Creality Ender-3 V3 SE or the Creality K2 Plus Combo?

The Creality K2 Plus Combo has a published review score and ranks #3 in our 3D printers ranking; the Creality Ender-3 V3 SE is not scored yet. Pick the Creality Ender-3 V3 SE for first time buyers on a tight budget. Pick the Creality K2 Plus Combo for large multi color and engineering prints.

### Which is cheaper?

The Creality Ender-3 V3 SE at $179, versus $1,199 for the Creality K2 Plus Combo, checked Oct 27, 2026.

### What is the difference between the Ender-3 V3 SE and the K2 Plus Combo?

Build volume: 220 x 220 x 250 mm on the Ender-3 V3 SE, 350 x 350 x 350 mm on the K2 Plus Combo. Print speed: Up to 250 mm/s (180 mm/s typical), 2,500 mm/s² acceleration on the Ender-3 V3 SE, Up to 600 mm/s, 30,000 mm/s² acceleration on the K2 Plus Combo. Multi color: No, single color on the Ender-3 V3 SE, Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units on the K2 Plus Combo.

Full reviews: [Creality Ender-3 V3 SE](https://robotsforthat.com/robot/creality-ender-3-v3-se/index.md), [Creality K2 Plus Combo](https://robotsforthat.com/robot/creality-k2-plus-combo/index.md)