# Creality K2 Pro vs Elegoo Centauri 2

As of Nov 4, 2026, the Creality K2 Pro costs $799 and the Elegoo Centauri 2 costs $379, so the Elegoo Centauri 2 is $420 cheaper. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Elegoo Centauri 2 for budget buyers who want fast 4 color PLA and PETG prints.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/creality-k2-pro-vs-elegoo-centauri-2/

## Side by side

| | Creality K2 Pro | Elegoo Centauri 2 |
|---|---|---|
| Price | $799 | $379 |
| 3 year cost | $799 | $379 |
| Our score | Not scored yet | Not scored yet |
| Rank in 3D printers | #47 | #37 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store badge; exact terms not stated) | Not checked |
| Build volume | 300 x 300 x 300 mm (Creality) | 256 x 256 x 256 mm (Elegoo, Tom's Hardware) |
| Print speed | Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) | Up to 500 mm/s, 300 mm/s recommended; 20,000 mm/s2 acceleration (Elegoo) |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); single nozzle, so color changes purge filament | Up to 4 colors with the CANVAS system (Combo), with RFID and auto refill (Elegoo); Irish Examiner found multi color printing slow and wasteful versus multi toolhead printers |
| Enclosure | Yes, fully enclosed with active chamber heating up to 60 C (Creality); All3DP printed ASA at 60 C with no noticeable warping | No, open frame; no camera or lighting (Tom's Hardware) |
| Auto leveling | Yes, full auto leveling plus AI camera calibration (Creality) | Yes, automatic leveling and Z offset at startup (Tom's Hardware) |
| Max nozzle temp | 300 C (Creality) | 350 C, 0.4 mm hardened steel nozzle (Elegoo, Tom's Hardware) |
| Heated bed | Yes, up to 110 C (Creality) | Yes, up to 110 C, PEI steel flex plate (Elegoo, Tom's Hardware) |
| Filament types | PLA, PETG, PET, ABS, ASA, PLA CF, PA CF, PPA CF (Creality) | PLA, PETG, TPU (Tom's Hardware); ABS, ASA and nylon not recommended without an enclosure (Irish Examiner) |
| Connectivity | Wi-Fi, Ethernet, USB drive; Creality Cloud app (Creality) | LAN, Wi-Fi, USB flash drive; no cloud needed (Tom's Hardware) |
| Camera | Yes, two AI cameras, one for monitoring and one for calibration (Creality). All3DP notes the nozzle camera has no live view | No (Tom's Hardware) |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB but still found the fans noisy | No dB figure; Irish Examiner called it somewhat loud |
| Assembly | Ready to print after unpacking and installing the touchscreen (Creality); The Gadgeteer needed a helper to unbox it | Mostly pre assembled (Tom's Hardware); 30 to 40 minutes for the Combo (Irish Examiner) |
| Weight | 23.7 kg net (Creality) | 15 kg; 500 x 480 x 500 mm (Tom's Hardware) |
| Best for | big enclosed prints on a mid range budget | budget buyers who want fast 4 color PLA and PETG prints |
| Skip if | you want the quietest, most polished printer | you want a camera or plan to print ABS, ASA or nylon |

## What reviewers found

### Creality K2 Pro

- All3DP: Called it difficult to find fault with. ASA printed at a 60 C chamber with no noticeable warping, PLA and PETG printed with the door closed and the CFS handled hundreds of color changes. Downsides were layer inconsistency, weaker rear left overhangs, purge waste and long pre print calibration when enabled. [Source](https://all3dp.com/1/creality-k2-pro-combo-review/)
- The Gadgeteer: Measured about 46 dB but still called the fans noisy. A chainmail print finished with some artifacts where the K2 failed, a full bed helmet printed well and CFS multi color prints had clean lines. Setup needed a helper. [Source](https://the-gadgeteer.com/2025/10/29/creality-k2-combo-and-creality-k2-pro-combo-review-feature-rich-3d-printing-platforms/)

### Elegoo Centauri 2

- Tom's Hardware: Called it a very good four color CoreXY printer. A four color fidget took 5 h 13 min and a PET-GF part printed at 350 C in 1 h 23 min. 95A TPU fed reliably; softer TPU clogged. [Source](https://tomshardware.com/3d-printing/elegoo-centauri-2-combo-review)
- Irish Examiner: Combo assembled in 30 to 40 minutes. PLA, silk PLA, TPU and PETG printed with excellent quality, matching the Centauri Carbon 2. Somewhat loud, and multi color printing was slow. [Source](https://www.irishexaminer.com/business/technology/arid-41918086.html)

## Questions buyers ask

### Which is better, the Creality K2 Pro or the Elegoo Centauri 2?

Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Elegoo Centauri 2 for budget buyers who want fast 4 color PLA and PETG prints.

### Which is cheaper?

The Elegoo Centauri 2 at $379, versus $799 for the Creality K2 Pro, checked Nov 4, 2026.

### What is the difference between the K2 Pro and the Centauri 2?

Build volume: 300 x 300 x 300 mm (Creality) on the K2 Pro, 256 x 256 x 256 mm (Elegoo, Tom's Hardware) on the Centauri 2. Print speed: Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) on the K2 Pro, Up to 500 mm/s, 300 mm/s recommended; 20,000 mm/s2 acceleration (Elegoo) on the Centauri 2. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2 Pro, Up to 4 colors with the CANVAS system (Combo), with RFID and auto refill (Elegoo); Irish… on the Centauri 2.

Full reviews: [Creality K2 Pro](https://robotsforthat.com/robot/creality-k2-pro/index.md), [Elegoo Centauri 2](https://robotsforthat.com/robot/elegoo-centauri-2/index.md)