# Creality K2 Pro vs Elegoo Centauri Carbon 2

As of Nov 4, 2026, the Creality K2 Pro costs $799 and the Elegoo Centauri Carbon 2 costs $349, so the Elegoo Centauri Carbon 2 is $450 cheaper. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Elegoo Centauri Carbon 2 for budget enclosed printing with room to add color.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/creality-k2-pro-vs-elegoo-centauri-carbon-2/

## Side by side

| | Creality K2 Pro | Elegoo Centauri Carbon 2 |
|---|---|---|
| Price | $799 | $349 |
| 3 year cost | $799 | $349 |
| Our score | Not scored yet | Not scored yet |
| Rank in 3D printers | #47 | #35 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store badge; exact terms not stated) | 12 months; 6 months on the extruder kit; consumables not covered |
| Build volume | 300 x 300 x 300 mm (Creality) | 256 x 256 x 256 mm |
| Print speed | Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) | Up to 500 mm/s, 20,000 mm/s² acceleration |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); single nozzle, so color changes purge filament | Upgrade ready; up to 4 colors with the CANVAS unit (sold separately or in the Combo) |
| Enclosure | Yes, fully enclosed with active chamber heating up to 60 C (Creality); All3DP printed ASA at 60 C with no noticeable warping | Yes, enclosed chamber with auto controlled grille |
| Auto leveling | Yes, full auto leveling plus AI camera calibration (Creality) | Yes, full auto calibration with auto Z offset (121 points per Notebookcheck) |
| Max nozzle temp | 300 C (Creality) | 350 °C, hardened steel nozzle |
| Heated bed | Yes, up to 110 C (Creality) | Yes, up to 110 °C |
| Filament types | PLA, PETG, PET, ABS, ASA, PLA CF, PA CF, PPA CF (Creality) | PLA, PETG, TPU, PET, PC, ASA and fiber filled such as PA6-CF |
| Connectivity | Wi-Fi, Ethernet, USB drive; Creality Cloud app (Creality) | Elegoo Matrix app, ElegooSlicer, USB drive |
| Camera | Yes, two AI cameras, one for monitoring and one for calibration (Creality). All3DP notes the nozzle camera has no live view | Yes, with AI spaghetti detection (Notebookcheck) |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB but still found the fans noisy | Under 45 dB in silent mode (Elegoo claim); 44 to 47 dB average measured by Notebookcheck |
| Assembly | Ready to print after unpacking and installing the touchscreen (Creality); The Gadgeteer needed a helper to unbox it | n/a |
| Weight | 23.7 kg net (Creality) | About 20 kg (Notebookcheck) |
| Best for | big enclosed prints on a mid range budget | budget enclosed printing with room to add color |
| Skip if | you want the quietest, most polished printer | you need more than 4 colors |

## What reviewers found

### Creality K2 Pro

- All3DP: Called it difficult to find fault with. ASA printed at a 60 C chamber with no noticeable warping, PLA and PETG printed with the door closed and the CFS handled hundreds of color changes. Downsides were layer inconsistency, weaker rear left overhangs, purge waste and long pre print calibration when enabled. [Source](https://all3dp.com/1/creality-k2-pro-combo-review/)
- The Gadgeteer: Measured about 46 dB but still called the fans noisy. A chainmail print finished with some artifacts where the K2 failed, a full bed helmet printed well and CFS multi color prints had clean lines. Setup needed a helper. [Source](https://the-gadgeteer.com/2025/10/29/creality-k2-combo-and-creality-k2-pro-combo-review-feature-rich-3d-printing-platforms/)

### Elegoo Centauri Carbon 2

- Notebookcheck: PLA and PETG printed cleanly on stock profiles. Measured 44 to 47 dB on average, color swaps took about 70 seconds, and multi color prints made heavy purge waste. Connectivity was inconsistent. [Source](https://www.notebookcheck.net/Elegoo-Centauri-Carbon-2-3D-printer-review-Lot-of-features-for-not-a-lot-of-money.1239803.0.html)
- Hackster: Called it strong value for a multi material printer. CANVAS swaps were fast and reliable and print quality matched the original Centauri Carbon, but it is limited to four spools and swaps still purge. [Source](https://www.hackster.io/news/the-maker-s-toolbox-elegoo-centauri-carbon-2-3d-printer-review-99788f603c96)

## Questions buyers ask

### Which is better, the Creality K2 Pro or the Elegoo Centauri Carbon 2?

Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Elegoo Centauri Carbon 2 for budget enclosed printing with room to add color.

### Which is cheaper?

The Elegoo Centauri Carbon 2 at $349, versus $799 for the Creality K2 Pro, checked Nov 4, 2026.

### What is the difference between the K2 Pro and the Centauri Carbon 2?

Build volume: 300 x 300 x 300 mm (Creality) on the K2 Pro, 256 x 256 x 256 mm on the Centauri Carbon 2. Print speed: Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) on the K2 Pro, Up to 500 mm/s, 20,000 mm/s² acceleration on the Centauri Carbon 2. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2 Pro, Upgrade ready; up to 4 colors with the CANVAS unit (sold separately or in the Combo) on the Centauri Carbon 2.

Full reviews: [Creality K2 Pro](https://robotsforthat.com/robot/creality-k2-pro/index.md), [Elegoo Centauri Carbon 2](https://robotsforthat.com/robot/elegoo-centauri-carbon-2/index.md)