# Creality K2 Pro vs Snapmaker U1

As of Nov 4, 2026, the Creality K2 Pro costs $799 and the Snapmaker U1 costs $699, so the Snapmaker U1 is $100 cheaper. The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Creality K2 Pro is not scored yet. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Snapmaker U1 for fast multi color with little waste.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/creality-k2-pro-vs-snapmaker-u1/

## Side by side

| | Creality K2 Pro | Snapmaker U1 |
|---|---|---|
| Price | $799 | $699 |
| 3 year cost | $799 | $699 |
| Our score | Not scored yet | 7.3/10 |
| Rank in 3D printers | #47 | #19 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store badge; exact terms not stated) | 1 year in the US for machines and modules (Snapmaker US store) |
| Build volume | 300 x 300 x 300 mm (Creality) | 270 x 270 x 270 mm (Snapmaker) |
| Print speed | Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) | Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); single nozzle, so color changes purge filament | Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and about 5 s for TechRadar, with very low purge waste |
| Enclosure | Yes, fully enclosed with active chamber heating up to 60 C (Creality); All3DP printed ASA at 60 C with no noticeable warping | No, semi open; optional Top Cover sold separately for ABS, ASA, PA and PC (Snapmaker) |
| Auto leveling | Yes, full auto leveling plus AI camera calibration (Creality) | Yes, mesh bed leveling and automatic toolhead offset calibration (Snapmaker) |
| Max nozzle temp | 300 C (Creality) | 300 C, 0.4 mm stainless steel nozzles (Snapmaker) |
| Heated bed | Yes, up to 110 C (Creality) | Yes, up to 100 C, flexible PEI plate (Snapmaker, TechRadar) |
| Filament types | PLA, PETG, PET, ABS, ASA, PLA CF, PA CF, PPA CF (Creality) | PLA, PETG, TPU, PVA, PCTG; PET, ABS, ASA, PA, PC with the Top Cover; carbon and glass fiber blends also need a hardened nozzle (Snapmaker) |
| Connectivity | Wi-Fi, Ethernet, USB drive; Creality Cloud app (Creality) | Wi-Fi (2.4 GHz), USB flash drive (Snapmaker); Tom's Hardware also lists LAN. Klipper firmware, OrcaSlicer support |
| Camera | Yes, two AI cameras, one for monitoring and one for calibration (Creality). All3DP notes the nozzle camera has no live view | Yes, 2 MP chamber camera (Snapmaker); both reviewers hit an early bug where it did not work with Orca |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB but still found the fans noisy | No dB figure; TechRadar found it much quieter than competing multi filament machines |
| Assembly | Ready to print after unpacking and installing the touchscreen (Creality); The Gadgeteer needed a helper to unbox it | Setup takes 15 to 30 minutes (TechRadar) |
| Weight | 23.7 kg net (Creality) | 18.2 kg; 584 x 499 x 730 mm (Snapmaker) |
| Best for | big enclosed prints on a mid range budget | fast multi color with little waste |
| Skip if | you want the quietest, most polished printer | you mostly print single color parts |

## What reviewers found

### Creality K2 Pro

- All3DP: Called it difficult to find fault with. ASA printed at a 60 C chamber with no noticeable warping, PLA and PETG printed with the door closed and the CFS handled hundreds of color changes. Downsides were layer inconsistency, weaker rear left overhangs, purge waste and long pre print calibration when enabled. [Source](https://all3dp.com/1/creality-k2-pro-combo-review/)
- The Gadgeteer: Measured about 46 dB but still called the fans noisy. A chainmail print finished with some artifacts where the K2 failed, a full bed helmet printed well and CFS multi color prints had clean lines. Setup needed a helper. [Source](https://the-gadgeteer.com/2025/10/29/creality-k2-combo-and-creality-k2-pro-combo-review-feature-rich-3d-printing-platforms/)

### Snapmaker U1

- Tom's Hardware: Editor's Choice. Tool swaps took about 10 to 12 s versus about 90 s on Bambu Lab. A PLA spiders print took 3 h 20 min with 4.4 g of purge waste, where a P1P took about 2 hours longer and used about 25 g more. A multicolor lettering print wasted just 0.76 g. [Source](https://www.tomshardware.com/3d-printing/snapmaker-u1-review)
- TechRadar (4.5/5): Scored 4.5 out of 5 with average dimensional error of 0.056 mm. Tool changes took about 5 s and multi color prints ran two to three times faster than before; a robot tortoise finished in under a day versus 36 hours previously. Cons were add ons needed for some materials and early connectivity bugs. [Source](https://www.techradar.com/pro/snapmaker-u1-3d-printer-review)

## Questions buyers ask

### Which is better, the Creality K2 Pro or the Snapmaker U1?

The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Creality K2 Pro is not scored yet. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Snapmaker U1 for fast multi color with little waste.

### Which is cheaper?

The Snapmaker U1 at $699, versus $799 for the Creality K2 Pro, checked Nov 4, 2026.

### What is the difference between the K2 Pro and the U1?

Build volume: 300 x 300 x 300 mm (Creality) on the K2 Pro, 270 x 270 x 270 mm (Snapmaker) on the U1. Print speed: Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) on the K2 Pro, Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) on the U1. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2 Pro, Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and… on the U1.

Full reviews: [Creality K2 Pro](https://robotsforthat.com/robot/creality-k2-pro/index.md), [Snapmaker U1](https://robotsforthat.com/robot/snapmaker-u1/index.md)