# Flashforge AD5X vs Flashforge Adventurer 5M Pro

As of Nov 4, 2026, the Flashforge AD5X costs $349 and the Flashforge Adventurer 5M Pro costs $569, so the Flashforge AD5X is $220 cheaper. The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Flashforge AD5X is not scored yet. Pick the Flashforge AD5X for cheap 4 color printing in a small space. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/flashforge-ad5x-vs-flashforge-adventurer-5m-pro/

## Side by side

| | Flashforge AD5X | Flashforge Adventurer 5M Pro |
|---|---|---|
| Price | $349 | $569 |
| 3 year cost | $349 | $569 |
| Our score | Not scored yet | 7.9/10 |
| Rank in 3D printers | #34 | #12 |
| Status | on sale | on sale |
| Warranty | 1 year limited; 3 months on extruder parts | 1 year limited on the printer, 3 months on extruder parts (Flashforge) |
| Build volume | 220 x 220 x 220 mm | 220 x 220 x 220 mm (Flashforge) |
| Print speed | Up to 300 mm/s print, 600 mm/s travel, 20,000 mm/s² acceleration | Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice |
| Multi color | Yes, 4 colors with the built in IFS | No, single filament |
| Enclosure | No, open frame; DIY enclosure kit sold separately | Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com) |
| Auto leveling | Yes, one click auto leveling | Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives) |
| Max nozzle temp | 300 °C | 280 C (Flashforge) |
| Heated bed | Yes, up to 110 °C, PEI steel sheet | Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C |
| Filament types | PLA, PETG, TPU 95A, TPU 64D to 75D, PLA-CF, PETG-CF | PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge) |
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB (Flashforge) |
| Camera | None (Tom's Hardware notes no camera) | Yes, built in camera for monitoring (Flashforge) |
| Noise | About 58 dB without the enclosure (ProToolReviews) | Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min |
| Assembly | Three steps: screen, filament holder and multi color module | About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives) |
| Weight | 11.4 kg (Tom's Hardware) | 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed |
| Best for | cheap 4 color printing in a small space | enclosed printing in small spaces |
| Skip if | you want a camera or enclosed printing | you need large or multi color prints |

## What reviewers found

### Flashforge AD5X

- Tom's Hardware: Excellent print quality across PLA, PETG, TPU and ASA, but the Orca based slicer crashed about every third print. A 33 frog plate wasted 11 g over 23 color swaps. [Source](https://www.tomshardware.com/3d-printing/flashforge-ad5x-review)
- ProToolReviews: Called it a well rounded multicolor printer with sharp prints and reliable runs. Noted about 58 dB noise unless enclosed and suggested the optional enclosure. [Source](https://www.protoolreviews.com/flashforge-ad5x-3d-printer-review/)

### Flashforge Adventurer 5M Pro

- 3DPrint.com: A full volume ASA print took 24 h 44 min with no warping and a 100 mm cube measured 99.70 x 99.71 x 100.02 mm. Measured 68 dB average and 79 dB max. Ran with 100% uptime over a month; TPU needed 30 to 40 mm/s. [Source](https://3dprint.com/312375/flashforge-adventurer-5m-pro-review-a-compact-powerhouse-for-3d-printing/amp/)
- 3Dnatives (9.5/10): Scored 9.5/10 with 10/10 for print quality. Auto calibration took about 15 minutes with no manual input. Cons were a confusing slicer transition, small build volume, no multi material and a rear mounted spool. [Source](https://www.3dnatives.com/en/3dnatives-lab-adventurer-5m-pro-3d-printer-flashforge-200620244/)

## Questions buyers ask

### Which is better, the Flashforge AD5X or the Flashforge Adventurer 5M Pro?

The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Flashforge AD5X is not scored yet. Pick the Flashforge AD5X for cheap 4 color printing in a small space. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces.

### Which is cheaper?

The Flashforge AD5X at $349, versus $569 for the Flashforge Adventurer 5M Pro, checked Nov 4, 2026.

### What is the difference between the AD5X and the Adventurer 5M Pro?

Build volume: 220 x 220 x 220 mm on the AD5X, 220 x 220 x 220 mm (Flashforge) on the Adventurer 5M Pro. Print speed: Up to 300 mm/s print, 600 mm/s travel, 20,000 mm/s² acceleration on the AD5X, Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to… on the Adventurer 5M Pro. Multi color: Yes, 4 colors with the built in IFS on the AD5X, No, single filament on the Adventurer 5M Pro.

Full reviews: [Flashforge AD5X](https://robotsforthat.com/robot/flashforge-ad5x/index.md), [Flashforge Adventurer 5M Pro](https://robotsforthat.com/robot/flashforge-adventurer-5m-pro/index.md)