# Flashforge Adventurer 5M Pro vs Flashforge Creator 5

As of Nov 4, 2026, the Flashforge Adventurer 5M Pro costs $569 and the Flashforge Creator 5 costs $699, so the Flashforge Adventurer 5M Pro is $130 cheaper. The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Flashforge Creator 5 is not scored yet. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces. Pick the Flashforge Creator 5 for low cost multi color PLA and PETG.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/flashforge-adventurer-5m-pro-vs-flashforge-creator-5/

## Side by side

| | Flashforge Adventurer 5M Pro | Flashforge Creator 5 |
|---|---|---|
| Price | $569 | $699 |
| 3 year cost | $569 | $699 |
| Our score | 7.9/10 | Not scored yet |
| Rank in 3D printers | #12 | #46 |
| Status | on sale | on sale |
| Warranty | 1 year limited on the printer, 3 months on extruder parts (Flashforge) | n/a |
| Build volume | 220 x 220 x 220 mm (Flashforge) | 256 x 256 x 256 mm |
| Print speed | Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice | Up to 300 mm/s print, 600 mm/s travel, 30,000 mm/s2 (Flashforge); default profile ran at 160 mm/s in Tom's Hardware testing |
| Multi color | No, single filament | 4 independent toolheads; Tom's Hardware got a 44 g purge block on a 33 g PLA bust with default settings |
| Enclosure | Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com) | No, open frame; the Creator 5 Pro is the enclosed model and there is no upgrade path (Tom's Hardware) |
| Auto leveling | Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives) | n/a |
| Max nozzle temp | 280 C (Flashforge) | 320 C |
| Heated bed | Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C | Up to 120 C, dual sided PEI plate |
| Filament types | PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge) | Recommended: PLA, PETG, TPU, PLA-CF, PETG-CF, silk, PVA, BVOH. ABS, ASA and nylon need an enclosure (Flashforge) |
| Connectivity | Wi-Fi, Ethernet, USB (Flashforge) | n/a |
| Camera | Yes, built in camera for monitoring (Flashforge) | Yes, 1280 x 720 at 30 fps |
| Noise | Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min | Below 55 dB in silent mode (Flashforge claim) |
| Assembly | About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives) | n/a |
| Weight | 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed | 14 kg net |
| Best for | enclosed printing in small spaces | low cost multi color PLA and PETG |
| Skip if | you need large or multi color prints | you print ABS, ASA or nylon |

## What reviewers found

### Flashforge Adventurer 5M Pro

- 3DPrint.com: A full volume ASA print took 24 h 44 min with no warping and a 100 mm cube measured 99.70 x 99.71 x 100.02 mm. Measured 68 dB average and 79 dB max. Ran with 100% uptime over a month; TPU needed 30 to 40 mm/s. [Source](https://3dprint.com/312375/flashforge-adventurer-5m-pro-review-a-compact-powerhouse-for-3d-printing/amp/)
- 3Dnatives (9.5/10): Scored 9.5/10 with 10/10 for print quality. Auto calibration took about 15 minutes with no manual input. Cons were a confusing slicer transition, small build volume, no multi material and a rear mounted spool. [Source](https://www.3dnatives.com/en/3dnatives-lab-adventurer-5m-pro-3d-printer-flashforge-200620244/)

### Flashforge Creator 5

- Tom's Hardware: Called it the least expensive tool changer on the market. A PLA bust took 8 h 28 min; a PETG fidget toy took 2 h 57 min at 120 mm/s. One TPU print failed with a clog. Slicer profiles need work. [Source](https://www.tomshardware.com/3d-printing/flashforge-creator-5-review)
- 3DWithUs (4.8): Hands on: calibration took 20 to 30 min. A four color Benchy took about 45 min and a four color figure about 6.5 h with low waste. Cons: open frame, no waste bin, no heated chamber. [Source](https://3dwithus.com/flashforge-creator-5-hands-on-review-4-toolhead-3d-printer)

## Questions buyers ask

### Which is better, the Flashforge Adventurer 5M Pro or the Flashforge Creator 5?

The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Flashforge Creator 5 is not scored yet. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces. Pick the Flashforge Creator 5 for low cost multi color PLA and PETG.

### Which is cheaper?

The Flashforge Adventurer 5M Pro at $569, versus $699 for the Flashforge Creator 5, checked Nov 4, 2026.

### What is the difference between the Adventurer 5M Pro and the Creator 5?

Build volume: 220 x 220 x 220 mm (Flashforge) on the Adventurer 5M Pro, 256 x 256 x 256 mm on the Creator 5. Print speed: Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to… on the Adventurer 5M Pro, Up to 300 mm/s print, 600 mm/s travel, 30,000 mm/s2 (Flashforge); default profile ran at… on the Creator 5. Multi color: No, single filament on the Adventurer 5M Pro, 4 independent toolheads; Tom's Hardware got a 44 g purge block on a 33 g PLA bust with… on the Creator 5.

Full reviews: [Flashforge Adventurer 5M Pro](https://robotsforthat.com/robot/flashforge-adventurer-5m-pro/index.md), [Flashforge Creator 5](https://robotsforthat.com/robot/flashforge-creator-5/index.md)