# Flashforge Adventurer 5M Pro vs Flsun T1 Pro

As of Nov 4, 2026, the Flashforge Adventurer 5M Pro costs $569 and the Flsun T1 Pro costs $549, so the Flsun T1 Pro is $20 cheaper. The Flashforge Adventurer 5M Pro scores higher in our ranking (7.9 vs 7.8 out of 10). Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints.

Prices checked Nov 4, 2026. HTML version: https://robotsforthat.com/vs/flashforge-adventurer-5m-pro-vs-flsun-t1-pro/

## Side by side

| | Flashforge Adventurer 5M Pro | Flsun T1 Pro |
|---|---|---|
| Price | $569 | $549 |
| 3 year cost | $569 | $549 |
| Our score | 7.9/10 | 7.8/10 |
| Rank in 3D printers | #12 | #13 |
| Status | on sale | on sale |
| Warranty | 1 year limited on the printer, 3 months on extruder parts (Flashforge) | Not checked |
| Build volume | 220 x 220 x 220 mm (Flashforge) | 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of height is usable |
| Print speed | Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice | Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600 mm/s in ASA and high speed PLA |
| Multi color | No, single filament | No, single filament (TechRadar) |
| Enclosure | Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com) | Yes, acrylic sides and smoked glass front (The Gadgeteer); no dedicated chamber heater (3DPrint.com) |
| Auto leveling | Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives) | Yes, fully automatic leveling with no manual Z offset (The Gadgeteer) |
| Max nozzle temp | 280 C (Flashforge) | 300 C, 0.4 mm brass nozzle (Flsun, The Gadgeteer) |
| Heated bed | Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C | Yes, up to 110 C with textured PEI plate (Flsun) |
| Filament types | PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge) | PLA, PETG, TPU, ABS, ASA, PA, PC, PET (Flsun, The Gadgeteer); ABS warped and failed for 3DPrint.com |
| Connectivity | Wi-Fi, Ethernet, USB (Flashforge) | Wi-Fi, Klipper web interface, USB drive, OTA updates (The Gadgeteer, 3DPrint.com) |
| Camera | Yes, built in camera for monitoring (Flashforge) | Yes, for timelapse and remote monitoring (The Gadgeteer); 3DPrint.com saw timelapse cutouts on long prints |
| Noise | Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min | Flsun claims as low as 55 dB; 3DPrint.com measured 71 dB average with 91 dB peaks |
| Assembly | About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives) | Partial assembly, about 1 hour (3DPrint.com) to a few hours (The Gadgeteer) |
| Weight | 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed | 18.41 kg net; 436 x 490 x 835 mm (The Gadgeteer) |
| Best for | enclosed printing in small spaces | makers who want very fast PLA and PETG prints |
| Skip if | you need large or multi color prints | you need a quiet printer or a square build plate |

## What reviewers found

### Flashforge Adventurer 5M Pro

- 3DPrint.com: A full volume ASA print took 24 h 44 min with no warping and a 100 mm cube measured 99.70 x 99.71 x 100.02 mm. Measured 68 dB average and 79 dB max. Ran with 100% uptime over a month; TPU needed 30 to 40 mm/s. [Source](https://3dprint.com/312375/flashforge-adventurer-5m-pro-review-a-compact-powerhouse-for-3d-printing/amp/)
- 3Dnatives (9.5/10): Scored 9.5/10 with 10/10 for print quality. Auto calibration took about 15 minutes with no manual input. Cons were a confusing slicer transition, small build volume, no multi material and a rear mounted spool. [Source](https://www.3dnatives.com/en/3dnatives-lab-adventurer-5m-pro-3d-printer-flashforge-200620244/)

### Flsun T1 Pro

- The Gadgeteer: Called it the fastest printer the reviewer had used; a vase took about 40 minutes. Zero clogs and zero manual leveling across dozens of prints. Loose display ribbon and menus with no back button. [Source](https://the-gadgeteer.com/2024/11/10/flsun-t1-pro-ultra-high-speed-3d-printer-review-breathtakingly-fast-quiet-and-outstanding-print-quality)
- 3DPrint.com: Over 300 hours of printing with no part failures. Measured 71 dB average and 91 dB peaks versus Flsun's 50 dB claim. Parts came out slightly undersized, for example 98.85 mm on a 100 mm Y test, and ABS warped. [Source](https://3dprint.com/314071/flsun-t1-pro-3d-printer-review-is-speed-still-the-most-important-feature/amp/)
- TechRadar (4.5/5): Reviewed the base T1. Scored 29 of 30 in print tests with 0.133 mm average dimensional error. Very loud cooling fan; assembly took about an hour. [Source](https://www.techradar.com/pro/flsun-t1-3d-printer-review)

## Questions buyers ask

### Which is better, the Flashforge Adventurer 5M Pro or the Flsun T1 Pro?

The Flashforge Adventurer 5M Pro scores higher in our ranking (7.9 vs 7.8 out of 10). Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints.

### Which is cheaper?

The Flsun T1 Pro at $549, versus $569 for the Flashforge Adventurer 5M Pro, checked Nov 4, 2026.

### What is the difference between the Adventurer 5M Pro and the T1 Pro?

Build volume: 220 x 220 x 220 mm (Flashforge) on the Adventurer 5M Pro, 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of… on the T1 Pro. Print speed: Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to… on the Adventurer 5M Pro, Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600… on the T1 Pro. Multi color: No, single filament on the Adventurer 5M Pro, No, single filament (TechRadar) on the T1 Pro.

Full reviews: [Flashforge Adventurer 5M Pro](https://robotsforthat.com/robot/flashforge-adventurer-5m-pro/index.md), [Flsun T1 Pro](https://robotsforthat.com/robot/flsun-t1-pro/index.md)