Mammotion LUBA error codes, lights and messages

Mammotion LUBA error codes are not published as a numbered list by Mammotion. The maker explains faults through the robot's LED patterns, app messages such as Poor Positioning Status, and support articles, which this page collects.

Researched by Riley Hart · updated Oct 15, 2026 · How we research

Short answer

Mammotion does not publish a numbered error code list for the LUBA in its manuals or Help Center. Instead, the LUBA mini 2 AWD manual explains faults through the robot's side LED: slow blinking red means stopped, low battery, stuck, key not seated or lifted, and fast blinking red means a malfunction or failed update. Positioning faults show in the app as statuses like Float, Single or None, and Mammotion's support site covers each one.

Find your code

Light or message	What it means	Fix from Mammotion
Side LED solid red	Normal operation	Nothing
Side LED pulsing red	OTA update in progress, or charging	Wait
Side LED slow blinking red	STOP pressed, low battery, robot stuck, security key not seated, or robot lifted, tilted or flipped	Double press to unlock after STOP, recharge, reseat the key, or set the robot back on the ground
Side LED fast blinking red	Robot malfunction or failed update	For updates, use a stable network and do not exit the app or power off; for a malfunction, contact support and upload logs
Station LED blinking green	Robot is docked	Nothing
Station LED solid green	Robot is not in the station	Dock the robot
Station LED solid red	Charging station malfunction	Contact support
Station LED off	No power	Check the power supply and outlet
App: Poor Positioning Status	Not enough satellite signal for accurate position	Give the RTK reference station a clear sky view and check its LED is steady green; move the boundary away from obstacles
App: Float or Single	Position accuracy too low for auto mowing (Float 50 to 200 cm, Single meter level)	Clear the sky view for the robot and station; set trees or metal furniture as no go zones
App: None	No positioning	Check the robot is not indoors or backed by metal; contact aftersales if it looks defective

LED meanings from the Mammotion LUBA mini 2 AWD user manual (v1.0, 01/2026). Positioning messages from Mammotion's Help Center, which writes them for RTK models with a reference station. Checked October 15, 2026.

Still broken?Repair or replace

If the same code comes back after the fix, contact Mammotion support first, especially under warranty. Out of warranty, compare the repair quote with a new robot's price and 3 year cost.

Compare robot lawn mowers

PartsMammotion parts

See every Mammotion model we track, with prices and running costs.

Mammotion robots

I own a MammotionAlert me

One email for recalls, bad updates and new fixes for Mammotion. Nothing else.

Mammotion recalls

Oct 26, 2026No Mammotion robot recall found
US Consumer Product Safety Commission database, checked dailyOK

Didn't find it?Ask about your Mammotion

We read every question. When several owners ask the same thing, the answer goes on this page.

Why there is no full LUBA code list

The LUBA mini 2 AWD manual has no numbered error table. It explains faults through LED patterns and points you to the Mammotion app, where the robot shows what stopped it. Mammotion's Help Center then has articles for specific messages and problems.

If you see a numbered code in the app that is not covered here, check the Mammotion Help Center at support.mammotion.com, then contact Mammotion with the code and a log upload from the app.

Positioning errors on RTK models

Mammotion's positioning article says auto mowing runs only in Fix status, which is accurate to under 10 cm. Float, Single and None all stop auto mowing. The app also shows how many satellites the robot and the reference station see; Mammotion says more than 20 co viewing satellites on both L1 and L2 is good for stable positioning.

In our data the LUBA mini 2 AWD uses LiDAR and cameras with no antenna, and the LUBA 3 AWD 3000 and 5000 use network RTK with no physical base. The reference station steps below apply to Mammotion models that use one.

Place the reference station in the open, with nothing covering it within at least 5 m, or mount it on a wall or roof.
Check the station has power, its LED is steady green, it is not damaged or waterlogged, and the radio antenna is attached.
If you replaced the station, pair it with the robot again in the app.
Move the charging station out of covered spots, and use modify boundary to pull corners away from walls and trees.

LUBA will not turn on or connect

Mammotion's steps for a LUBA that will not power on are to put it on the charging station, unplug and reinsert the key if the station LED stays solid green, and then factory reset. Send it in if the battery stays at 0% after long charging.

If the app cannot connect over Bluetooth, turn the LUBA off, unplug and reinsert the key, turn it back on, and restart the app. Mammotion suggests checking that a device named Luba shows up in your phone's Bluetooth scan to rule out the robot.

When to contact support

Contact Mammotion for a fast blinking red side LED that does not clear, a solid red station LED, a None positioning status that looks like a hardware fault, or a battery stuck at 0%. Upload logs from the app and have the serial number and proof of purchase ready. If you bought from a dealer, the manual says to contact the dealer first.

In our data both the LUBA 3 AWD and the LUBA mini 2 AWD carry a 3 year warranty. Mammotion says you pay shipping to the service center.

Mammotion models in our rankings

Lawn · Mammotion LUBA 3 AWD Best for steep lawns under trees $2,3997.5/10 Check price →Full profile

Lawn · Mammotion LUBA mini 2 AWD Best for tight, complex small yards $1,7997.8/10 Check price →Full profile

Questions people ask

Why is my Mammotion LUBA blinking red?

Slow blinking red means the STOP button was pressed, the battery is low, the robot is stuck, the security key is not seated, or it was lifted or flipped. Fast blinking red means a malfunction or a failed update.

What does Poor Positioning Status mean on a LUBA?

The robot or its RTK reference station is not getting a strong enough satellite signal. Give the station a clear view of the sky, check its LED is steady green, and keep boundaries away from tall obstacles.

Does Mammotion publish a list of LUBA error codes?

Not in the LUBA mini 2 AWD manual or as a single list in its Help Center. Mammotion explains faults through LED patterns, app messages and individual support articles.

How do I reset a Mammotion LUBA?

Mammotion's Help Center has a factory reset guide. Try reinserting the key and restarting the app first, since a factory reset is the last step in Mammotion's troubleshooting order.