Bambu Lab P1S vs Flashforge Adventurer 5M Pro
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab P1S costs $349 and the Flashforge Adventurer 5M Pro costs $569, so the Bambu Lab P1S is $220 cheaper. The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Bambu Lab P1S is not scored yet. Pick the Bambu Lab P1S for hobbyists who want ABS and ASA in an enclosed printer. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces. The Bambu Lab P1S wins 4 of 5 points we can measure.
Who wins, point by point
The Bambu Lab P1S wins 4 of 5 points we can measure. Built from today's prices, the specs and independent tests for these two robots.
| P1S | Adventurer 5M Pro | Winner | |
|---|---|---|---|
| Price today | $349 | $569 | P1S |
| Warranty | 2 years | 1 year | P1S |
| Build volume | 256 x 256 x 256 mm | 220 x 220 x 220 mm | P1S |
| Top print speed | 500 mm/s | 600 mm/s | Adventurer 5M Pro |
| Max nozzle temp | 300°C | 280°C | P1S |
- You want to spend less (saves $220)
- You care most about warranty (2 years vs 1 year)
- You care most about build volume (256 x 256 x 256 mm vs 220 x 220 x 220 mm)
- Best for hobbyists who want ABS and ASA in an enclosed printer
- You care most about top print speed (600 mm/s vs 500 mm/s)
- Best for enclosed printing in small spaces
- Build volume
- 256 x 256 x 256 mm
- Max speed
- Up to 500 mm/s toolhead
- Multicolor
- Yes
- Enclosure
- Yes
Enclosed fast printer for ABS and ASA with AMS combo options
Full Bambu Lab P1S review, pros and cons →- Build volume
- 220 x 220 x 220 mm
- Max speed
- Up to 600 mm/s travel
- Multicolor
- No
- Enclosure
- Yes
Compact enclosed CoreXY printer with filters and quick nozzles
Full Flashforge Adventurer 5M Pro review, pros and cons →Side by side
| Bambu Lab P1S | Flashforge Adventurer 5M Pro | |
|---|---|---|
| Price | $349 | $569 |
| 3 year cost | $349 | $569 |
| Our score | Not scored yet | 7.9/10 |
| Rank in 3D printers | #33 | #12 |
| Status | on sale | on sale |
| Warranty | 2 years (Bambu Lab US store product page) | 1 year limited on the printer, 3 months on extruder parts (Flashforge) |
| Build volume | 256 x 256 x 256 mm (slicer defaults to 250 mm height) | 220 x 220 x 220 mm (Flashforge) |
| Print speed | Up to 500 mm/s toolhead speed, 20 m/s2 acceleration (Bambu Lab) | Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice |
| Multi color | Yes with an AMS combo; up to 16 colors with 4 AMS units | No, single filament |
| Enclosure | Yes, plastic and glass, with chamber fan and activated carbon filter | Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com) |
| Auto leveling | Yes, auto bed leveling and vibration compensation | Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives) |
| Max nozzle temp | 300 C | 280 C (Flashforge) |
| Heated bed | Yes, up to 100 C | Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C |
| Filament types | Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA. Capable: PA, PC | PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge) |
| Camera | Yes, 1280 x 720 at 0.5 fps with timelapse | Yes, built in camera for monitoring (Flashforge) |
| Assembly | About 15 minutes from unboxing to first print (Bambu Lab claim) | About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives) |
| Weight | 12.95 kg net; 389 x 389 x 458 mm | 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed |
| Connectivity | n/a | Wi-Fi, Ethernet, USB (Flashforge) |
| Noise | n/a | Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min |
| Best for | hobbyists who want ABS and ASA in an enclosed printer | enclosed printing in small spaces |
| Skip if | you need a quiet printer in a shared room | you need large or multi color prints |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab P1S
- Tom's Hardware: Said it hits a sweet spot with affordable CoreXY speed, an enclosure for high temperature printing and simple auto leveling. Downsides were noise, proprietary parts and AMS filament waste. Source
- All3DP: Printed ASA and PC with little corner warping and found auto bed leveling consistent. Criticized the 720p, 0.5 fps camera and some software limits such as blocked microSD access from the slicer. Source
Flashforge Adventurer 5M Pro
- 3DPrint.com: A full volume ASA print took 24 h 44 min with no warping and a 100 mm cube measured 99.70 x 99.71 x 100.02 mm. Measured 68 dB average and 79 dB max. Ran with 100% uptime over a month; TPU needed 30 to 40 mm/s. Source
- 3Dnatives (9.5/10): Scored 9.5/10 with 10/10 for print quality. Auto calibration took about 15 minutes with no manual input. Cons were a confusing slicer transition, small build volume, no multi material and a rear mounted spool. Source
Questions buyers ask
Which is better, the Bambu Lab P1S or the Flashforge Adventurer 5M Pro?
The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Bambu Lab P1S is not scored yet. Pick the Bambu Lab P1S for hobbyists who want ABS and ASA in an enclosed printer. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces.
Which is cheaper?
The Bambu Lab P1S at $349, versus $569 for the Flashforge Adventurer 5M Pro, checked Nov 4, 2026.
What is the difference between the P1S and the Adventurer 5M Pro?
Build volume: 256 x 256 x 256 mm (slicer defaults to 250 mm height) on the P1S, 220 x 220 x 220 mm (Flashforge) on the Adventurer 5M Pro. Print speed: Up to 500 mm/s toolhead speed, 20 m/s2 acceleration (Bambu Lab) on the P1S, Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to… on the Adventurer 5M Pro. Multi color: Yes with an AMS combo; up to 16 colors with 4 AMS units on the P1S, No, single filament on the Adventurer 5M Pro.
Also consider at this price
See all ranked →More comparisons
- Bambu Lab P1S vs Prusa Research CORE One+ (Gen 2)
- Bambu Lab P1S vs Elegoo Centauri Carbon 2
- Bambu Lab P1S vs Creality K1C (2025)
- Bambu Lab P1S vs Prusa Research Original Prusa MK4S
- Bambu Lab P1S vs Prusa Research Original Prusa MINI+
- Bambu Lab P1S vs Flashforge AD5X
- Bambu Lab P1S vs Creality K2 Plus Combo
- Anycubic Kobra S1 Combo vs Bambu Lab P1S
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.