Bambu Lab P1S vs Flsun T1 Pro
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab P1S costs $349 and the Flsun T1 Pro costs $549, so the Bambu Lab P1S is $200 cheaper. The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Bambu Lab P1S is not scored yet. Pick the Bambu Lab P1S for hobbyists who want ABS and ASA in an enclosed printer. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. The Flsun T1 Pro wins 2 of 4 points we can measure (1 tied).
Who wins, point by point
The Flsun T1 Pro wins 2 of 4 points we can measure (1 tied). Built from today's prices, the specs and independent tests for these two robots.
| P1S | T1 Pro | Winner | |
|---|---|---|---|
| Price today | $349 | $549 | P1S |
| Top print speed | 500 mm/s | 1000 mm/s | T1 Pro |
| Max nozzle temp | 300°C | 300°C | Tie |
| Release year | 2023 | 2024 | T1 Pro |
- You want to spend less (saves $200)
- Best for hobbyists who want ABS and ASA in an enclosed printer
- You care most about top print speed (1000 mm/s vs 500 mm/s)
- You want the newer model (2024 vs 2023)
- Best for makers who want very fast PLA and PETG prints
- Build volume
- 256 x 256 x 256 mm
- Max speed
- Up to 500 mm/s toolhead
- Multicolor
- Yes
- Enclosure
- Yes
Enclosed fast printer for ABS and ASA with AMS combo options
Full Bambu Lab P1S review, pros and cons →- Build volume
- 260 mm diameter x 330
- Max speed
- Up to 1,000 mm/s
- Multicolor
- No
- Enclosure
- Yes
Very fast delta printer with a tall round build area
Full Flsun T1 Pro review, pros and cons →Side by side
| Bambu Lab P1S | Flsun T1 Pro | |
|---|---|---|
| Price | $349 | $549 |
| 3 year cost | $349 | $549 |
| Our score | Not scored yet | 7.8/10 |
| Rank in 3D printers | #33 | #13 |
| Status | on sale | on sale |
| Warranty | 2 years (Bambu Lab US store product page) | Not checked |
| Build volume | 256 x 256 x 256 mm (slicer defaults to 250 mm height) | 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of height is usable |
| Print speed | Up to 500 mm/s toolhead speed, 20 m/s2 acceleration (Bambu Lab) | Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600 mm/s in ASA and high speed PLA |
| Multi color | Yes with an AMS combo; up to 16 colors with 4 AMS units | No, single filament (TechRadar) |
| Enclosure | Yes, plastic and glass, with chamber fan and activated carbon filter | Yes, acrylic sides and smoked glass front (The Gadgeteer); no dedicated chamber heater (3DPrint.com) |
| Auto leveling | Yes, auto bed leveling and vibration compensation | Yes, fully automatic leveling with no manual Z offset (The Gadgeteer) |
| Max nozzle temp | 300 C | 300 C, 0.4 mm brass nozzle (Flsun, The Gadgeteer) |
| Heated bed | Yes, up to 100 C | Yes, up to 110 C with textured PEI plate (Flsun) |
| Filament types | Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA. Capable: PA, PC | PLA, PETG, TPU, ABS, ASA, PA, PC, PET (Flsun, The Gadgeteer); ABS warped and failed for 3DPrint.com |
| Camera | Yes, 1280 x 720 at 0.5 fps with timelapse | Yes, for timelapse and remote monitoring (The Gadgeteer); 3DPrint.com saw timelapse cutouts on long prints |
| Assembly | About 15 minutes from unboxing to first print (Bambu Lab claim) | Partial assembly, about 1 hour (3DPrint.com) to a few hours (The Gadgeteer) |
| Weight | 12.95 kg net; 389 x 389 x 458 mm | 18.41 kg net; 436 x 490 x 835 mm (The Gadgeteer) |
| Connectivity | n/a | Wi-Fi, Klipper web interface, USB drive, OTA updates (The Gadgeteer, 3DPrint.com) |
| Noise | n/a | Flsun claims as low as 55 dB; 3DPrint.com measured 71 dB average with 91 dB peaks |
| Best for | hobbyists who want ABS and ASA in an enclosed printer | makers who want very fast PLA and PETG prints |
| Skip if | you need a quiet printer in a shared room | you need a quiet printer or a square build plate |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab P1S
- Tom's Hardware: Said it hits a sweet spot with affordable CoreXY speed, an enclosure for high temperature printing and simple auto leveling. Downsides were noise, proprietary parts and AMS filament waste. Source
- All3DP: Printed ASA and PC with little corner warping and found auto bed leveling consistent. Criticized the 720p, 0.5 fps camera and some software limits such as blocked microSD access from the slicer. Source
Flsun T1 Pro
- The Gadgeteer: Called it the fastest printer the reviewer had used; a vase took about 40 minutes. Zero clogs and zero manual leveling across dozens of prints. Loose display ribbon and menus with no back button. Source
- 3DPrint.com: Over 300 hours of printing with no part failures. Measured 71 dB average and 91 dB peaks versus Flsun's 50 dB claim. Parts came out slightly undersized, for example 98.85 mm on a 100 mm Y test, and ABS warped. Source
Questions buyers ask
Which is better, the Bambu Lab P1S or the Flsun T1 Pro?
The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Bambu Lab P1S is not scored yet. Pick the Bambu Lab P1S for hobbyists who want ABS and ASA in an enclosed printer. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints.
Which is cheaper?
The Bambu Lab P1S at $349, versus $549 for the Flsun T1 Pro, checked Nov 4, 2026.
What is the difference between the P1S and the T1 Pro?
Build volume: 256 x 256 x 256 mm (slicer defaults to 250 mm height) on the P1S, 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of… on the T1 Pro. Print speed: Up to 500 mm/s toolhead speed, 20 m/s2 acceleration (Bambu Lab) on the P1S, Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600… on the T1 Pro. Multi color: Yes with an AMS combo; up to 16 colors with 4 AMS units on the P1S, No, single filament (TechRadar) on the T1 Pro.
Also consider at this price
See all ranked →More comparisons
- Bambu Lab P1S vs Prusa Research CORE One+ (Gen 2)
- Bambu Lab P1S vs Elegoo Centauri Carbon 2
- Bambu Lab P1S vs Creality K1C (2025)
- Bambu Lab P1S vs Prusa Research Original Prusa MK4S
- Bambu Lab P1S vs Prusa Research Original Prusa MINI+
- Bambu Lab P1S vs Flashforge AD5X
- Bambu Lab P1S vs Creality K2 Plus Combo
- Anycubic Kobra S1 Combo vs Bambu Lab P1S
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.