Creality K2 Pro vs Elegoo Centauri Carbon 2
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K2 Pro costs $799 and the Elegoo Centauri Carbon 2 costs $349, so the Elegoo Centauri Carbon 2 is $450 cheaper. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Elegoo Centauri Carbon 2 for budget enclosed printing with room to add color. They split the points we can measure, 2 each.
Who wins, point by point
They split the points we can measure, 2 each. Built from today's prices, the specs and independent tests for these two robots.
| K2 Pro | Centauri Carbon 2 | Winner | |
|---|---|---|---|
| Price today | $799 | $349 | Centauri Carbon 2 |
| Warranty | 12 months | 12 months | Tie |
| Build volume | 300 x 300 x 300 mm | 256 x 256 x 256 mm | K2 Pro |
| Top print speed | 600 mm/s | 500 mm/s | K2 Pro |
| Max nozzle temp | 300°C | 350°C | Centauri Carbon 2 |
- You care most about build volume (300 x 300 x 300 mm vs 256 x 256 x 256 mm)
- You care most about top print speed (600 mm/s vs 500 mm/s)
- Best for big enclosed prints on a mid range budget
- You want to spend less (saves $450)
- You care most about max nozzle temp (350°C vs 300°C)
- Best for budget enclosed printing with room to add color
- Build volume
- 300 x 300 x 300 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
300 mm heated chamber printer with optional 4 color CFS
Full Creality K2 Pro review, pros and cons →- Build volume
- 256 x 256 x 256 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Upgrade ready
- Enclosure
- Yes
Low cost enclosed printer that adds 4 colors with CANVAS
Full Elegoo Centauri Carbon 2 review, pros and cons →Side by side
| Creality K2 Pro | Elegoo Centauri Carbon 2 | |
|---|---|---|
| Price | $799 | $349 |
| 3 year cost | $799 | $349 |
| Our score | Not scored yet | Not scored yet |
| Rank in 3D printers | #47 | #35 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store badge; exact terms not stated) | 12 months; 6 months on the extruder kit; consumables not covered |
| Build volume | 300 x 300 x 300 mm (Creality) | 256 x 256 x 256 mm |
| Print speed | Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) | Up to 500 mm/s, 20,000 mm/s² acceleration |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); single nozzle, so color changes purge filament | Upgrade ready; up to 4 colors with the CANVAS unit (sold separately or in the Combo) |
| Enclosure | Yes, fully enclosed with active chamber heating up to 60 C (Creality); All3DP printed ASA at 60 C with no noticeable warping | Yes, enclosed chamber with auto controlled grille |
| Auto leveling | Yes, full auto leveling plus AI camera calibration (Creality) | Yes, full auto calibration with auto Z offset (121 points per Notebookcheck) |
| Max nozzle temp | 300 C (Creality) | 350 °C, hardened steel nozzle |
| Heated bed | Yes, up to 110 C (Creality) | Yes, up to 110 °C |
| Filament types | PLA, PETG, PET, ABS, ASA, PLA CF, PA CF, PPA CF (Creality) | PLA, PETG, TPU, PET, PC, ASA and fiber filled such as PA6-CF |
| Connectivity | Wi-Fi, Ethernet, USB drive; Creality Cloud app (Creality) | Elegoo Matrix app, ElegooSlicer, USB drive |
| Camera | Yes, two AI cameras, one for monitoring and one for calibration (Creality). All3DP notes the nozzle camera has no live view | Yes, with AI spaghetti detection (Notebookcheck) |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB but still found the fans noisy | Under 45 dB in silent mode (Elegoo claim); 44 to 47 dB average measured by Notebookcheck |
| Assembly | Ready to print after unpacking and installing the touchscreen (Creality); The Gadgeteer needed a helper to unbox it | n/a |
| Weight | 23.7 kg net (Creality) | About 20 kg (Notebookcheck) |
| Best for | big enclosed prints on a mid range budget | budget enclosed printing with room to add color |
| Skip if | you want the quietest, most polished printer | you need more than 4 colors |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K2 Pro
- All3DP: Called it difficult to find fault with. ASA printed at a 60 C chamber with no noticeable warping, PLA and PETG printed with the door closed and the CFS handled hundreds of color changes. Downsides were layer inconsistency, weaker rear left overhangs, purge waste and long pre print calibration when enabled. Source
- The Gadgeteer: Measured about 46 dB but still called the fans noisy. A chainmail print finished with some artifacts where the K2 failed, a full bed helmet printed well and CFS multi color prints had clean lines. Setup needed a helper. Source
Elegoo Centauri Carbon 2
- Notebookcheck: PLA and PETG printed cleanly on stock profiles. Measured 44 to 47 dB on average, color swaps took about 70 seconds, and multi color prints made heavy purge waste. Connectivity was inconsistent. Source
- Hackster: Called it strong value for a multi material printer. CANVAS swaps were fast and reliable and print quality matched the original Centauri Carbon, but it is limited to four spools and swaps still purge. Source
Questions buyers ask
Which is better, the Creality K2 Pro or the Elegoo Centauri Carbon 2?
Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Elegoo Centauri Carbon 2 for budget enclosed printing with room to add color.
Which is cheaper?
The Elegoo Centauri Carbon 2 at $349, versus $799 for the Creality K2 Pro, checked Nov 4, 2026.
What is the difference between the K2 Pro and the Centauri Carbon 2?
Build volume: 300 x 300 x 300 mm (Creality) on the K2 Pro, 256 x 256 x 256 mm on the Centauri Carbon 2. Print speed: Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) on the K2 Pro, Up to 500 mm/s, 20,000 mm/s² acceleration on the Centauri Carbon 2. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2 Pro, Upgrade ready; up to 4 colors with the CANVAS unit (sold separately or in the Combo) on the Centauri Carbon 2.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.