- Build volume
- 250 x 250 x 250 mm
- Max speed
- 600 mm/s
- Multicolor
- 4 colors
- Enclosure
- Yes
Anycubic Kobra S1 Combo
Quiet enclosed 4 color printer with a filament drying feeder
Researched by Riley Hart · updated Oct 27, 2026
We started tracking this price on Oct 27, 2026 and have not found a past sale price yet, so we cannot say if $399 is a good deal. Black Friday is Nov 27, 2026, 31 days away, when robots in this category usually get their biggest cuts. Get a price drop alert.
The Kobra S1 Combo is a good value enclosed printer for people who want multi color prints without much fuss. It runs quietly and its ACE Pro unit also dries filament. Skip it if you hate waste or want deep firmware control, since color swaps purge filament and settings are limited.
Best for: easy multi color printing on a budget. Skip if: you want low waste or deep tuning.
Specs
- Build volume
- 250 x 250 x 250 mm
- Print speed
- Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration
- Multi color
- Yes, 4 colors with one ACE Pro; 8 colors with two
- Enclosure
- Yes, fully enclosed with LED lights
- Auto leveling
- Yes, LeviQ 3.0 with Z offset
- Max nozzle temp
- 320 °C
- Heated bed
- Yes, up to 120 °C, PEI spring steel plate
- Filament types
- PLA, PETG, ABS, ASA, TPU 95A (single color only); FAQ also lists PC, PA and fiber filled
3 year cost of ownership
- Robot
- $399
- Total
- $399
Multi color prints purge filament at each swap and the ACE Pro cleans the nozzle at startup, which adds filament use. A 3 year cost is not computed.
Status and safety
- US availability
- ● On sale
- Recalls
- Not checked
- FCC authorized
- Not checked
- Company
- ● Active
- Warranty
- ● 1 year
Price history
Tracked dailyTracking started Oct 27, 2026 at $399.
Each day adds a point. Turn on a price alert to hear about drops.
Where to buy
- Anycubic store
- $399 →
Affiliate links. We may earn a commission. It never changes our score. Disclosure
Pros
- Strong value for a 4 color enclosed printer
- Quiet, about 44 dB measured by Notebookcheck
- ACE Pro dries filament as it feeds
- Fast setup of about 10 minutes per TechRadar
Cons
- Multi color prints are much slower
- Purging wastes filament
- Needs two power outlets
- Limited firmware settings per Notebookcheck
What independent reviewers found
- Scored 27 of 30 on a print quality test with about 0.21 mm average X/Y error. A 43 minute single color print became a 14 hour multi color print.
- TechRadar · 4.5/5
- Measured 44 dB(A) at one meter. Quality was best up to about 200 mm/s, and nozzle cleaning plus purging caused significant waste.
- Notebookcheck
Spec history
Checked dailySpec tracking starts with the next daily check.
Email me when Kobra S1 Combo gets cheaper
We check prices every morning. One email per real drop, and you confirm your email first.
Own one? Tell us how it holds up
We email owners 3 quick questions now and every 6 months, then show the results here.
Questions buyers ask
How many colors can it print?
Four with one ACE Pro, or eight with two ACE Pro units.
Is it quiet?
Fairly. Anycubic claims 44 dB in quiet mode and Notebookcheck measured 44 dB(A) at one meter.
Can it print TPU in color?
No. TPU 95A works only as a single color and cannot run through the ACE Pro.