- Build volume
- 350 x 350 x 350 mm
- Max speed
- 600 mm/s
- Multicolor
- 4 colors
- Enclosure
- Yes
Creality K2 Plus Combo
Big heated chamber printer with 4 color CFS, up to 16 colors
Researched by Riley Hart · updated Oct 27, 2026
We started tracking this price on Oct 27, 2026 and have not found a past sale price yet, so we cannot say if $1,199 is a good deal. Black Friday is Nov 27, 2026, 31 days away, when robots in this category usually get their biggest cuts. Get a price drop alert.
The K2 Plus Combo is a large, heated chamber printer for people who print big parts or engineering materials in several colors. It is fast, well built and watches prints with two cameras. Skip it if you have limited space or a tight budget, since it is heavy and multi color jobs waste filament.
Best for: large multi color and engineering prints. Skip if: you have limited desk space or budget.
Specs
- Build volume
- 350 x 350 x 350 mm
- Print speed
- Up to 600 mm/s, 30,000 mm/s² acceleration
- Multi color
- Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units
- Enclosure
- Yes, with active chamber heating to 60 °C and air purifier
- Auto leveling
- Yes, full auto leveling with strain gauge and bed tilt calibration
- Max nozzle temp
- 350 °C
- Heated bed
- Yes, up to 120 °C
- Filament types
- PLA, PETG, ABS, ASA, PC, PA, TPU, PLA-CF, PA-CF, PPA-CF, PPS and more (CFS does not feed TPU)
3 year cost of ownership
- Robot
- $1,199
- Total
- $1,199
Multi color prints purge filament at each color swap, which raises filament use. No consumable schedule is published, so a 3 year cost is not computed.
Status and safety
- US availability
- ● On sale
- Recalls
- Not checked
- FCC authorized
- Not checked
- Company
- ● Active
- Warranty
- ● Up to 12 months (Creality store)
Price history
Tracked dailyTracking started Oct 27, 2026 at $1,199.
Each day adds a point. Turn on a price alert to hear about drops.
Where to buy
- Creality store
- $1,199 →
Affiliate links. We may earn a commission. It never changes our score. Disclosure
Pros
- Large 350 mm cube build volume
- Heated chamber up to 60 °C for ABS and nylon
- 4 colors included, expandable to 16
- Two AI cameras paused faulty prints in TechRadar testing
Cons
- Heavy and takes a lot of space
- Multi color prints are much slower
- High flow nozzle wastes more filament on color swaps per Tom's Hardware
- TPU jammed in the CFS in Tom's Hardware testing
What independent reviewers found
- Editor's Choice. Benchy in 15 min 56 s; a three color dragon finished 56 minutes faster than a Bambu Lab P1P but made 121.7 g of purge waste versus 99 g. TPU jammed in the CFS.
- Tom's Hardware
- Scored 24 of 30 on a print quality test and measured about 45 dB at 300 mm/s. A four color Benchy took about 8.5 hours versus about 30 minutes in one color.
- TechRadar · 4.5/5
Spec history
Checked dailySpec tracking starts with the next daily check.
Email me when K2 Plus Combo gets cheaper
We check prices every morning. One email per real drop, and you confirm your email first.
Own one? Tell us how it holds up
We email owners 3 quick questions now and every 6 months, then show the results here.
Questions buyers ask
How many colors can it print?
Four with the included CFS. You can chain up to four CFS units for 16 colors.
Can it print ABS and nylon?
Yes. It has an enclosed chamber that heats to 60 °C, a 350 °C nozzle and a 120 °C bed.
Does it print TPU?
Yes, but not through the CFS. Feed TPU from an external spool.