Anycubic Kobra S1 Combo vs Anycubic Photon Mono M7 Pro
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Anycubic Kobra S1 Combo costs $399 and the Anycubic Photon Mono M7 Pro costs $489, so the Anycubic Kobra S1 Combo is $90 cheaper. The Anycubic Kobra S1 Combo scores higher in our ranking (8.5 vs 7.9 out of 10). Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. Pick the Anycubic Photon Mono M7 Pro for fast, detailed resin prints. The Anycubic Kobra S1 Combo wins 2 of 4 points we can measure (2 tied).
Who wins, point by point
The Anycubic Kobra S1 Combo wins 2 of 4 points we can measure (2 tied). Built from today's prices, the specs and independent tests for these two robots.
| Kobra S1 Combo | Photon Mono M7 Pro | Winner | |
|---|---|---|---|
| Price today | $399 | $489 | Kobra S1 Combo |
| TechRadar score | 4.5/5 | 4.5/5 | Tie |
| Warranty | 1 year | 1 year | Tie |
| Build volume | 250 x 250 x 250 mm | 223 x 126 x 230 mm | Kobra S1 Combo |
- You want to spend less (saves $90)
- You care most about build volume (250 x 250 x 250 mm vs 223 x 126 x 230 mm)
- Best for easy multi color printing on a budget
- Best for fast, detailed resin prints
- Build volume
- 250 x 250 x 250 mm
- Max speed
- 600 mm/s
- Multicolor
- 4 colors
- Enclosure
- Yes
Quiet enclosed 4 color printer with a filament drying feeder
Full Anycubic Kobra S1 Combo review, pros and cons →- Build volume
- 223 x 126 x 230 mm
- Max speed
- Up to 130 mm/h
- Multicolor
- No
- Enclosure
- Yes
Fast 14K resin printer with auto resin refill and vat heating
Full Anycubic Photon Mono M7 Pro review, pros and cons →Side by side
| Anycubic Kobra S1 Combo | Anycubic Photon Mono M7 Pro | |
|---|---|---|
| Price | $399 | $489 |
| 3 year cost | $399 | $489 |
| Our score | 8.5/10 | 7.9/10 |
| Rank in 3D printers | #3 | #11 |
| Status | on sale | on sale |
| Warranty | 1 year | 1 year on printers, plus 30 day after sales guarantee and 14 day no reason return (Anycubic store) |
| Build volume | 250 x 250 x 250 mm | 223 x 126 x 230 mm, 6.5 L (Anycubic) |
| Print speed | Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration | Up to 130 mm/h with standard resin, 170 mm/h with high speed resin at 0.1 mm layers (Anycubic) |
| Multi color | Yes, 4 colors with one ACE Pro; 8 colors with two | No, resin printer prints one resin at a time |
| Enclosure | Yes, fully enclosed with LED lights | Yes, UV blocking cover (resin printer); TechRadar notes it lifts off and Basic Tutorials found it wobbles slightly |
| Auto leveling | Yes, LeviQ 3.0 with Z offset | Leveling free design (Anycubic); TechRadar needed to re level after about 4 kg of resin |
| Max nozzle temp | 320 °C | Not applicable, resin (MSLA) printer with no nozzle |
| Heated bed | Yes, up to 120 °C, PEI spring steel plate | No heated bed; temperature controlled resin vat, adjustable 20 to 40 C, default 25 C (Anycubic) |
| Filament types | PLA, PETG, ABS, ASA, TPU 95A (single color only); FAQ also lists PC, PA and fiber filled | Not applicable, uses 405 nm resin: standard, high speed, water washable, ABS like and plant based resins (Anycubic) |
| Connectivity | Anycubic app, slicer software, USB drive | USB, Wi-Fi and LAN file transfer; Anycubic app (Anycubic) |
| Camera | Yes, 480P HD camera | No camera listed (Anycubic) |
| Noise | 46 dB or less standard, 44 dB or less quiet mode (Anycubic claim) | No dB figure; TechRadar describes a subdued low hum, quieter than many mid range models |
| Assembly | About 15 minutes from unboxing to first print (Anycubic claim) | Largely pre assembled (Basic Tutorials) |
| Weight | 18 kg printer, 4.6 kg ACE Pro | 12.8 kg; 312 x 315 x 520 mm (Anycubic) |
| Best for | easy multi color printing on a budget | fast, detailed resin prints |
| Skip if | you want low waste or deep tuning | you cannot ventilate for resin fumes |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Anycubic Kobra S1 Combo
- TechRadar (4.5/5): Scored 27 of 30 on a print quality test with about 0.21 mm average X/Y error. A 43 minute single color print became a 14 hour multi color print. Source
- Notebookcheck: Measured 44 dB(A) at one meter. Quality was best up to about 200 mm/s, and nozzle cleaning plus purging caused significant waste. Source
Anycubic Photon Mono M7 Pro
- TechRadar (4.5/5): Scored 4.5 out of 5. High speed resin printed at 170 mm/h versus 130 mm/h on the previous model, and the clean function cleared about 80% of failures. Needed re leveling after about 4 kg of resin; auto refill tapered off below half a bottle. Source
- Basic Tutorials (91/100): Scored 91 with a Gold award. A print that takes about half a day on an FDM printer finished in under an hour with high speed resin, and it handled an 80 degree overhang. Supports sometimes failed to stick on flat areas and the touchscreen and software had flaws. Source
Questions buyers ask
Which is better, the Anycubic Kobra S1 Combo or the Anycubic Photon Mono M7 Pro?
The Anycubic Kobra S1 Combo scores higher in our ranking (8.5 vs 7.9 out of 10). Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. Pick the Anycubic Photon Mono M7 Pro for fast, detailed resin prints.
Which is cheaper?
The Anycubic Kobra S1 Combo at $399, versus $489 for the Anycubic Photon Mono M7 Pro, checked Nov 4, 2026.
What is the difference between the Kobra S1 Combo and the Photon Mono M7 Pro?
Build volume: 250 x 250 x 250 mm on the Kobra S1 Combo, 223 x 126 x 230 mm, 6.5 L (Anycubic) on the Photon Mono M7 Pro. Print speed: Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration on the Kobra S1 Combo, Up to 130 mm/h with standard resin, 170 mm/h with high speed resin at 0.1 mm layers… on the Photon Mono M7 Pro. Multi color: Yes, 4 colors with one ACE Pro; 8 colors with two on the Kobra S1 Combo, No, resin printer prints one resin at a time on the Photon Mono M7 Pro.
Also consider at this price
See all ranked →More comparisons
- Anycubic Kobra S1 Combo vs Bambu Lab P1S
- Anycubic Kobra S1 Combo vs Elegoo Centauri Carbon 2
- Anycubic Kobra S1 Combo vs Flashforge AD5X
- Anycubic Kobra S1 Combo vs Bambu Lab A1
- Anycubic Kobra S1 Combo vs Anycubic Kobra X
- Anycubic Kobra S1 Combo vs Elegoo Neptune 4 Max
- Anycubic Kobra S1 Combo vs Creality SPARKX i7
- Anycubic Kobra S1 Combo vs Creality K2
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.