Bambu Lab A1 vs Creality K1C (2025)

Researched by Riley Hart · prices checked Nov 4, 2026

Short answer · checked Nov 4, 2026

As of Nov 4, 2026, the Bambu Lab A1 costs $359 and the Creality K1C (2025) costs $499, so the Bambu Lab A1 is $140 cheaper. Pick the Bambu Lab A1 for beginners who want full size multi color prints. Pick the Creality K1C (2025) for fast single color prints in tough materials. The Bambu Lab A1 wins 3 of 5 points we can measure (1 tied).

Who wins, point by point

The Bambu Lab A1 wins 3 of 5 points we can measure (1 tied). Built from today's prices, the specs and independent tests for these two robots.

	A1	K1C (2025)	Winner
Price today	$359	$499	A1
Warranty	2 years	12 months	A1
Build volume	256 x 256 x 256 mm	220 x 220 x 250 mm	A1
Top print speed	500 mm/s	600 mm/s	K1C (2025)
Max nozzle temp	300°C	300°C	Tie

Pick the A1 if

You want to spend less (saves $140)
You care most about warranty (2 years vs 12 months)
You care most about build volume (256 x 256 x 256 mm vs 220 x 220 x 250 mm)
Best for beginners who want full size multi color prints

Pick the K1C (2025) if

You care most about top print speed (600 mm/s vs 500 mm/s)
Best for fast single color prints in tough materials

3D printers

Bambu LabA1

Build volume: 256 x 256 x 256 mm
Max speed: Up to 500 mm/s toolhead
Multicolor: Up to 4 colors
Enclosure: No

ON SALEPrice tracked daily

$359Check price at Bambu Lab US store (A1) →

Full size starter printer with optional 4 color AMS lite

Full Bambu Lab A1 review, pros and cons →

3D printers

CrealityK1C (2025)

Build volume: 220 x 220 x 250 mm
Max speed: Up to 600 mm/s
Multicolor: No
Enclosure: Yes

ON SALEPrice tracked daily

$499Check price at Search Amazon →

Fast enclosed printer with an AI camera for one color prints

Full Creality K1C (2025) review, pros and cons →

Side by side

	Bambu Lab A1	Creality K1C (2025)
Price	$359	$499
3 year cost	$359	$499
Our score	Not scored yet	Not scored yet
Rank in 3D printers	#36	#42
Status	on sale	on sale
Warranty	2 years (Bambu Lab US store product page)	Up to 12 months (Creality store)
Build volume	256 x 256 x 256 mm	220 x 220 x 250 mm
Print speed	Up to 500 mm/s toolhead speed, 10,000 mm/s2 acceleration (Bambu Lab)	Up to 600 mm/s (300 mm/s typical), 20,000 mm/s² acceleration
Multi color	Up to 4 colors with one AMS lite (Combo version); AMS units need the AMS HUB accessory	No, single color; Creality says the 2025 version is set to add multi color with its CFS unit later
Enclosure	No, open frame; Bambu Lab does not recommend enclosing it	Yes, fully enclosed with glass door, carbon filter and chamber fan
Auto leveling	Yes, full auto calibration of Z offset, bed level, vibration and nozzle pressure before each print	Yes, hands free auto leveling with auto Z offset
Max nozzle temp	300 C	300 °C, hardened steel nozzle
Heated bed	Yes, up to 100 C	Yes, up to 100 °C, PEI flexible plate
Filament types	Ideal: PLA, PETG, TPU, PVA. ABS, ASA, PC, PA and fiber filled types only for small, low infill parts	PLA, PETG, PET, TPU, ABS, ASA, PA, PC, PLA-CF, PA-CF, PET-CF
Connectivity	Bambu cloud service or LAN only mode; app and PC control	Wi-Fi, USB drive, Creality Cloud app
Camera	Yes, low frame rate camera up to 1080p with timelapse	Yes, AI camera for spaghetti detection, time lapse and remote view
Noise	As low as 49 dB (Bambu Lab claim)	45 dB or less in silent mode at 1 m (Creality claim)
Assembly	Ships mostly assembled	Comes assembled; Creality claims about 3 minutes to power on
Weight	8.3 kg net; 465 x 410 x 430 mm	12.4 kg net
Best for	beginners who want full size multi color prints	fast single color prints in tough materials
Skip if	you print ABS or ASA often	you want multi color prints today

Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.

What reviewers found

Bambu Lab A1

Tom's Hardware (Editor's Choice): Called it a reliable and quiet high speed printer at a competitive price. A speed Benchy took 19 min 15 s, and a panda print took 2 h 40 min in one color versus 6 h 46 min in three colors. Source
TechRadar (Editor's Choice): Scored 29 of 30 in its print quality test with a combined dimensional error of 0.099 mm. Flagged the software as complex for beginners and the open frame as a limit for ABS and PC. Source

Creality K1C (2025)

Tom's Hardware: Editor's Choice. A speed Benchy took 13 min 53 s at 300 mm/s and ABS and nylon parts printed with no warping. Cons were the poor filament path and needing glue stick on the PEI plate. Source
Tech Advisor: Called it a strong, reliable printer for beginners with impressive print quality and a useful built in camera, but noisy at high speed and frustrating for filament changes. Source

Questions buyers ask

Which is better, the Bambu Lab A1 or the Creality K1C (2025)?

Pick the Bambu Lab A1 for beginners who want full size multi color prints. Pick the Creality K1C (2025) for fast single color prints in tough materials.

Which is cheaper?

The Bambu Lab A1 at $359, versus $499 for the Creality K1C (2025), checked Nov 4, 2026.

What is the difference between the A1 and the K1C (2025)?

Build volume: 256 x 256 x 256 mm on the A1, 220 x 220 x 250 mm on the K1C (2025). Print speed: Up to 500 mm/s toolhead speed, 10,000 mm/s2 acceleration (Bambu Lab) on the A1, Up to 600 mm/s (300 mm/s typical), 20,000 mm/s² acceleration on the K1C (2025). Multi color: Up to 4 colors with one AMS lite (Combo version); AMS units need the AMS HUB accessory on the A1, No, single color; Creality says the 2025 version is set to add multi color with its CFS… on the K1C (2025).

Also consider at this price

See all ranked →

3D printers · Elegoo Centauri Carbon $438 3D printers · Bambu Lab A2L $4397.5/10 3D printers · Anycubic Kobra S1 Combo $3998.5/10 3D printers · Creality SPARKX i7 $3998.1/10

More comparisons

All 3D printers, ranked

See the ranking →

Affiliate links. We may earn a commission. It never changes our score. Disclosure