Creality K1C (2025) vs Creality SPARKX i7
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K1C (2025) costs $499 and the Creality SPARKX i7 costs $399, so the Creality SPARKX i7 is $100 cheaper. The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Creality K1C (2025) is not scored yet. Pick the Creality K1C (2025) for fast single color prints in tough materials. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. The Creality SPARKX i7 wins 2 of 5 points we can measure (2 tied).
Who wins, point by point
The Creality SPARKX i7 wins 2 of 5 points we can measure (2 tied). Built from today's prices, the specs and independent tests for these two robots.
| K1C (2025) | SPARKX i7 | Winner | |
|---|---|---|---|
| Price today | $499 | $399 | SPARKX i7 |
| Warranty | 12 months | 1 year | Tie |
| Build volume | 220 x 220 x 250 mm | 260 x 260 x 255 mm | SPARKX i7 |
| Top print speed | 600 mm/s | 500 mm/s | K1C (2025) |
| Max nozzle temp | 300°C | 300°C | Tie |
- You care most about top print speed (600 mm/s vs 500 mm/s)
- Best for fast single color prints in tough materials
- You want to spend less (saves $100)
- You care most about build volume (260 x 260 x 255 mm vs 220 x 220 x 250 mm)
- Best for beginners who want affordable 4 color PLA prints
- Build volume
- 220 x 220 x 250 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- No
- Enclosure
- Yes
Fast enclosed printer with an AI camera for one color prints
Full Creality K1C (2025) review, pros and cons →- Build volume
- 260 x 260 x 255 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Up to 4 colors
- Enclosure
- No
Quiet, low cost 4 color starter printer from Creality
Full Creality SPARKX i7 review, pros and cons →Side by side
| Creality K1C (2025) | Creality SPARKX i7 | |
|---|---|---|
| Price | $499 | $399 |
| 3 year cost | $499 | $399 |
| Our score | Not scored yet | 8.1/10 |
| Rank in 3D printers | #42 | #6 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store) | 1 year (Creality Canada store product page) |
| Build volume | 220 x 220 x 250 mm | 260 x 260 x 255 mm (Creality) |
| Print speed | Up to 600 mm/s (300 mm/s typical), 20,000 mm/s² acceleration | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes |
| Multi color | No, single color; Creality says the 2025 version is set to add multi color with its CFS unit later | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) |
| Enclosure | Yes, fully enclosed with glass door, carbon filter and chamber fan | No, open frame |
| Auto leveling | Yes, hands free auto leveling with auto Z offset | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) |
| Max nozzle temp | 300 °C, hardened steel nozzle | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle |
| Heated bed | Yes, up to 100 °C, PEI flexible plate | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) |
| Filament types | PLA, PETG, PET, TPU, ABS, ASA, PA, PC, PLA-CF, PA-CF, PET-CF | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU |
| Connectivity | Wi-Fi, USB drive, Creality Cloud app | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) |
| Camera | Yes, AI camera for spaghetti detection, time lapse and remote view | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) |
| Noise | 45 dB or less in silent mode at 1 m (Creality claim) | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode |
| Assembly | Comes assembled; Creality claims about 3 minutes to power on | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) |
| Weight | 12.4 kg net | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) |
| Best for | fast single color prints in tough materials | beginners who want affordable 4 color PLA prints |
| Skip if | you want multi color prints today | you need to print ABS, ASA or nylon |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K1C (2025)
- Tom's Hardware: Editor's Choice. A speed Benchy took 13 min 53 s at 300 mm/s and ABS and nylon parts printed with no warping. Cons were the poor filament path and needing glue stick on the PEI plate. Source
- Tech Advisor: Called it a strong, reliable printer for beginners with impressive print quality and a useful built in camera, but noisy at high speed and frustrating for filament changes. Source
Creality SPARKX i7
- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. Source
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. Source
Questions buyers ask
Which is better, the Creality K1C (2025) or the Creality SPARKX i7?
The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Creality K1C (2025) is not scored yet. Pick the Creality K1C (2025) for fast single color prints in tough materials. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.
Which is cheaper?
The Creality SPARKX i7 at $399, versus $499 for the Creality K1C (2025), checked Nov 4, 2026.
What is the difference between the K1C (2025) and the SPARKX i7?
Build volume: 220 x 220 x 250 mm on the K1C (2025), 260 x 260 x 255 mm (Creality) on the SPARKX i7. Print speed: Up to 600 mm/s (300 mm/s typical), 20,000 mm/s² acceleration on the K1C (2025), Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7. Multi color: No, single color; Creality says the 2025 version is set to add multi color with its CFS… on the K1C (2025), Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7.
Also consider at this price
See all ranked →More comparisons
- Creality K1C (2025) vs Elegoo Centauri Carbon 2
- Bambu Lab P1S vs Creality K1C (2025)
- Bambu Lab A1 vs Creality K1C (2025)
- Creality K1 Max vs Creality K1C (2025)
- Creality Hi Combo vs Creality K1C (2025)
- Creality K1C (2025) vs Flashforge Adventurer 5M Pro
- Anycubic Photon Mono M7 Pro vs Creality K1C (2025)
- Creality HALOT-X1 vs Creality K1C (2025)
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.