Creality K2 Pro vs Creality SPARKX i7
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K2 Pro costs $799 and the Creality SPARKX i7 costs $399, so the Creality SPARKX i7 is $400 cheaper. The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Creality K2 Pro is not scored yet. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. The Creality K2 Pro wins 2 of 5 points we can measure (2 tied).
Who wins, point by point
The Creality K2 Pro wins 2 of 5 points we can measure (2 tied). Built from today's prices, the specs and independent tests for these two robots.
| K2 Pro | SPARKX i7 | Winner | |
|---|---|---|---|
| Price today | $799 | $399 | SPARKX i7 |
| Warranty | 12 months | 1 year | Tie |
| Build volume | 300 x 300 x 300 mm | 260 x 260 x 255 mm | K2 Pro |
| Top print speed | 600 mm/s | 500 mm/s | K2 Pro |
| Max nozzle temp | 300°C | 300°C | Tie |
- You care most about build volume (300 x 300 x 300 mm vs 260 x 260 x 255 mm)
- You care most about top print speed (600 mm/s vs 500 mm/s)
- Best for big enclosed prints on a mid range budget
- You want to spend less (saves $400)
- Best for beginners who want affordable 4 color PLA prints
- Build volume
- 300 x 300 x 300 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
300 mm heated chamber printer with optional 4 color CFS
Full Creality K2 Pro review, pros and cons →- Build volume
- 260 x 260 x 255 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Up to 4 colors
- Enclosure
- No
Quiet, low cost 4 color starter printer from Creality
Full Creality SPARKX i7 review, pros and cons →Side by side
| Creality K2 Pro | Creality SPARKX i7 | |
|---|---|---|
| Price | $799 | $399 |
| 3 year cost | $799 | $399 |
| Our score | Not scored yet | 8.1/10 |
| Rank in 3D printers | #47 | #6 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store badge; exact terms not stated) | 1 year (Creality Canada store product page) |
| Build volume | 300 x 300 x 300 mm (Creality) | 260 x 260 x 255 mm (Creality) |
| Print speed | Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); single nozzle, so color changes purge filament | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) |
| Enclosure | Yes, fully enclosed with active chamber heating up to 60 C (Creality); All3DP printed ASA at 60 C with no noticeable warping | No, open frame |
| Auto leveling | Yes, full auto leveling plus AI camera calibration (Creality) | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) |
| Max nozzle temp | 300 C (Creality) | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle |
| Heated bed | Yes, up to 110 C (Creality) | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) |
| Filament types | PLA, PETG, PET, ABS, ASA, PLA CF, PA CF, PPA CF (Creality) | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU |
| Connectivity | Wi-Fi, Ethernet, USB drive; Creality Cloud app (Creality) | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) |
| Camera | Yes, two AI cameras, one for monitoring and one for calibration (Creality). All3DP notes the nozzle camera has no live view | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB but still found the fans noisy | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode |
| Assembly | Ready to print after unpacking and installing the touchscreen (Creality); The Gadgeteer needed a helper to unbox it | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) |
| Weight | 23.7 kg net (Creality) | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) |
| Best for | big enclosed prints on a mid range budget | beginners who want affordable 4 color PLA prints |
| Skip if | you want the quietest, most polished printer | you need to print ABS, ASA or nylon |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K2 Pro
- All3DP: Called it difficult to find fault with. ASA printed at a 60 C chamber with no noticeable warping, PLA and PETG printed with the door closed and the CFS handled hundreds of color changes. Downsides were layer inconsistency, weaker rear left overhangs, purge waste and long pre print calibration when enabled. Source
- The Gadgeteer: Measured about 46 dB but still called the fans noisy. A chainmail print finished with some artifacts where the K2 failed, a full bed helmet printed well and CFS multi color prints had clean lines. Setup needed a helper. Source
Creality SPARKX i7
- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. Source
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. Source
Questions buyers ask
Which is better, the Creality K2 Pro or the Creality SPARKX i7?
The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Creality K2 Pro is not scored yet. Pick the Creality K2 Pro for big enclosed prints on a mid range budget. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.
Which is cheaper?
The Creality SPARKX i7 at $399, versus $799 for the Creality K2 Pro, checked Nov 4, 2026.
What is the difference between the K2 Pro and the SPARKX i7?
Build volume: 300 x 300 x 300 mm (Creality) on the K2 Pro, 260 x 260 x 255 mm (Creality) on the SPARKX i7. Print speed: Up to 600 mm/s, 20,000 mm/s2 acceleration (Creality) on the K2 Pro, Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2 Pro, Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure