Anycubic Photon Mono M7 Pro vs Bambu Lab P2S
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Anycubic Photon Mono M7 Pro costs $489 and the Bambu Lab P2S costs $449, so the Bambu Lab P2S is $40 cheaper. The Anycubic Photon Mono M7 Pro has a published review score and ranks #11 in our 3D printers ranking; the Bambu Lab P2S is not scored yet. Pick the Anycubic Photon Mono M7 Pro for fast, detailed resin prints. Pick the Bambu Lab P2S for a first enclosed printer that just works. The Bambu Lab P2S wins 3 of 3 points we can measure.
Who wins, point by point
The Bambu Lab P2S wins 3 of 3 points we can measure. Built from today's prices, the specs and independent tests for these two robots.
| Photon Mono M7 Pro | P2S | Winner | |
|---|---|---|---|
| Price today | $489 | $449 | P2S |
| Build volume | 223 x 126 x 230 mm | 256 x 256 x 256 mm | P2S |
| Release year | 2024 | 2025 | P2S |
- Best for fast, detailed resin prints
- You want to spend less (saves $40)
- You care most about build volume (256 x 256 x 256 mm vs 223 x 126 x 230 mm)
- You want the newer model (2025 vs 2024)
- Best for a first enclosed printer that just works
- Build volume
- 223 x 126 x 230 mm
- Max speed
- Up to 130 mm/h
- Multicolor
- No
- Enclosure
- Yes
Fast 14K resin printer with auto resin refill and vat heating
Full Anycubic Photon Mono M7 Pro review, pros and cons →- Build volume
- 256 x 256 x 256 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Fast enclosed all rounder that replaces the P1S, AMS 2 Pro option
Full Bambu Lab P2S review, pros and cons →Side by side
| Anycubic Photon Mono M7 Pro | Bambu Lab P2S | |
|---|---|---|
| Price | $489 | $449 |
| 3 year cost | $489 | $449 |
| Our score | 7.9/10 | Not scored yet |
| Rank in 3D printers | #11 | #40 |
| Status | on sale | on sale |
| Warranty | 1 year on printers, plus 30 day after sales guarantee and 14 day no reason return (Anycubic store) | n/a |
| Build volume | 223 x 126 x 230 mm, 6.5 L (Anycubic) | 256 x 256 x 256 mm (Bambu Lab) |
| Print speed | Up to 130 mm/h with standard resin, 170 mm/h with high speed resin at 0.1 mm layers (Anycubic) | Up to 600 mm/s, 20,000 mm/s2 acceleration (Tom's Hardware spec table) |
| Multi color | No, resin printer prints one resin at a time | Yes with AMS 2 Pro, included in the Combo; Tom's Hardware notes the AMS wastes filament on color changes |
| Enclosure | Yes, UV blocking cover (resin printer); TechRadar notes it lifts off and Basic Tutorials found it wobbles slightly | Yes, enclosed chamber with active airflow; no active chamber heating. Tom's Hardware saw about 33 C inside |
| Auto leveling | Leveling free design (Anycubic); TechRadar needed to re level after about 4 kg of resin | Yes, automatic bed leveling and Auto Flow Dynamics calibration with an eddy current sensor (Bambu Lab) |
| Max nozzle temp | Not applicable, resin (MSLA) printer with no nozzle | 300 C (Bambu Lab) |
| Heated bed | No heated bed; temperature controlled resin vat, adjustable 20 to 40 C, default 25 C (Anycubic) | Yes, up to 110 C (Bambu Lab) |
| Filament types | Not applicable, uses 405 nm resin: standard, high speed, water washable, ABS like and plant based resins (Anycubic) | PLA, PETG, TPU, ABS, PC and carbon fiber blends; Tom's Hardware printed PLA, PETG CF, ABS and TPU |
| Connectivity | USB, Wi-Fi and LAN file transfer; Anycubic app (Anycubic) | Wi-Fi, Bluetooth, USB (Tom's Hardware) |
| Camera | No camera listed (Anycubic) | Yes, 1080p high frame rate camera with spaghetti failure detection (Bambu Lab, Hackster) |
| Noise | No dB figure; TechRadar describes a subdued low hum, quieter than many mid range models | n/a |
| Assembly | Largely pre assembled (Basic Tutorials) | Ships assembled; tool free quick swap hotend |
| Weight | 12.8 kg; 312 x 315 x 520 mm (Anycubic) | 14.9 kg; 392 x 406 x 478 mm (Tom's Hardware) |
| Best for | fast, detailed resin prints | a first enclosed printer that just works |
| Skip if | you cannot ventilate for resin fumes | you need a heated chamber |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Anycubic Photon Mono M7 Pro
- TechRadar (4.5/5): Scored 4.5 out of 5. High speed resin printed at 170 mm/h versus 130 mm/h on the previous model, and the clean function cleared about 80% of failures. Needed re leveling after about 4 kg of resin; auto refill tapered off below half a bottle. Source
- Basic Tutorials (91/100): Scored 91 with a Gold award. A print that takes about half a day on an FDM printer finished in under an hour with high speed resin, and it handled an 80 degree overhang. Supports sometimes failed to stick on flat areas and the touchscreen and software had flaws. Source
Bambu Lab P2S
- Tom's Hardware: Editor's Choice. A 20 hour PETG carbon fiber game board, a 3 h 12 min ABS top and a 6 h 46 min TPU handbag on a 0.8 mm nozzle all printed without clogs. Chamber held about 33 C. The only con listed was AMS filament waste. Source
- Hackster: Called it a new generation of the P1S rather than a new model. Liked the touchscreen, better camera with failure detection and tool free nozzle swaps, but saw no clear print quality gain over the P1S and noted no active chamber heating. Source
Questions buyers ask
Which is better, the Anycubic Photon Mono M7 Pro or the Bambu Lab P2S?
The Anycubic Photon Mono M7 Pro has a published review score and ranks #11 in our 3D printers ranking; the Bambu Lab P2S is not scored yet. Pick the Anycubic Photon Mono M7 Pro for fast, detailed resin prints. Pick the Bambu Lab P2S for a first enclosed printer that just works.
Which is cheaper?
The Bambu Lab P2S at $449, versus $489 for the Anycubic Photon Mono M7 Pro, checked Nov 4, 2026.
What is the difference between the Photon Mono M7 Pro and the P2S?
Build volume: 223 x 126 x 230 mm, 6.5 L (Anycubic) on the Photon Mono M7 Pro, 256 x 256 x 256 mm (Bambu Lab) on the P2S. Print speed: Up to 130 mm/h with standard resin, 170 mm/h with high speed resin at 0.1 mm layers… on the Photon Mono M7 Pro, Up to 600 mm/s, 20,000 mm/s2 acceleration (Tom's Hardware spec table) on the P2S. Multi color: No, resin printer prints one resin at a time on the Photon Mono M7 Pro, Yes with AMS 2 Pro, included in the Combo; Tom's Hardware notes the AMS wastes filament… on the P2S.
Also consider at this price
See all ranked →More comparisons
- Anycubic Photon Mono M7 Pro vs Elegoo Saturn 4 Ultra 16K
- Anycubic Photon Mono M7 Pro vs Elegoo Mars 5 Ultra
- Anycubic Photon Mono M7 Max vs Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro vs Creality HALOT-X1
- Anycubic Photon Mono M7 Pro vs Qidi Q2
- Anycubic Kobra S1 Combo vs Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro vs Creality K1C (2025)
- Anycubic Kobra 3 V2 Combo vs Anycubic Photon Mono M7 Pro
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure