Bambu Lab A2L vs Bambu Lab H2S
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab A2L costs $439 and the Bambu Lab H2S costs $1,049, so the Bambu Lab A2L is $610 cheaper. The Bambu Lab A2L scores higher in our ranking (7.5 vs 6.1 out of 10). Pick the Bambu Lab A2L for families and crafters who want large PLA prints and easy 4 color printing. Pick the Bambu Lab H2S for large prints and engineering filaments. The Bambu Lab H2S wins 3 of 5 points we can measure.
Who wins, point by point
The Bambu Lab H2S wins 3 of 5 points we can measure. Built from today's prices, the specs and independent tests for these two robots.
| A2L | H2S | Winner | |
|---|---|---|---|
| Price today | $439 | $1,049 | A2L |
| Build volume | 330 x 320 x 325 mm | 340 x 320 x 340 mm | H2S |
| Top print speed | 500 mm/s | 1000 mm/s | H2S |
| Max nozzle temp | 300°C | 350°C | H2S |
| Release year | 2026 | 2025 | A2L |
- You want to spend less (saves $610)
- You want the newer model (2026 vs 2025)
- Best for families and crafters who want large PLA prints and easy 4 color printing
- You care most about build volume (340 x 320 x 340 mm vs 330 x 320 x 325 mm)
- You care most about top print speed (1000 mm/s vs 500 mm/s)
- You care most about max nozzle temp (350°C vs 300°C)
- Best for large prints and engineering filaments
- Build volume
- 330 x 320 x 325 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Yes
- Enclosure
- No
Large bed Bambu bed slinger with optional 4 color AMS Lite
Full Bambu Lab A2L review, pros and cons →- Build volume
- 340 x 320 x 340 mm
- Max speed
- Up to 1,000 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Big single nozzle enclosed printer for large and engineering prints
Full Bambu Lab H2S review, pros and cons →Side by side
| Bambu Lab A2L | Bambu Lab H2S | |
|---|---|---|
| Price | $439 | $1,049 |
| 3 year cost | $439 | $1,049 |
| Our score | 7.5/10 | 6.1/10 |
| Rank in 3D printers | #17 | #28 |
| Status | on sale | on sale |
| Warranty | Not checked | n/a |
| Build volume | 330 x 320 x 325 mm (Tom's Hardware, FauxHammer) | 340 x 320 x 340 mm (Bambu Lab) |
| Print speed | Up to 500 mm/s (Bambu Lab via FauxHammer); Tom's Hardware printed at the default 200 to 300 mm/s | Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) |
| Multi color | Yes, 4 colors with AMS Lite in the Combo; also works with AMS and AMS 2 Pro (Tom's Hardware) | Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament. CGMagazine says chained AMS units can hold 16 or more spools |
| Enclosure | No, open frame bed slinger (Tom's Hardware) | Yes, fully enclosed with active chamber heating up to 65 C (Bambu Lab) |
| Auto leveling | Yes, automatic with nozzle probe Z height (Tom's Hardware) | Yes, automatic calibration; first run calibration took about 30 minutes for The Gadgeteer |
| Max nozzle temp | 300 C, 0.4 mm quick swap stainless steel nozzle (Tom's Hardware, FauxHammer) | 350 C (Bambu Lab) |
| Heated bed | Yes, up to 80 C, textured PEI spring steel sheet (FauxHammer) | Yes, up to 120 C (CGMagazine, The Gadgeteer) |
| Filament types | PLA, PETG, TPU (Tom's Hardware); no ABS or ASA profile at the time of FauxHammer's test | PLA, PETG, TPU, ABS, ASA, PC, PPA, PA6 GF, PAHT CF and other fiber filled engineering filaments (Bambu Lab) |
| Connectivity | Wi-Fi, microSD (Tom's Hardware) | Cloud, LAN, full offline mode, USB drive (not included); MQTT access in Developer Mode (Bambu Lab) |
| Camera | Conflicting: Tom's Hardware says no camera; FauxHammer lists an included camera with a feed of about 1 frame per second | Yes, 3 cameras including a top down BirdsEye camera and a toolhead camera, with AI failure detection (Bambu Lab) |
| Weight | 12.8 kg; 544 x 529 x 505 mm (Tom's Hardware) | 30 kg printer alone, 40.7 kg AMS combo (The Gadgeteer) |
| Extras | Optional blade cutter and pen plotter kit, $69 (Tom's Hardware) | n/a |
| Noise | Not measured in the reviews we checked; Tom's Hardware found strong vibration on a light table | Below 50 dB (Bambu Lab claim, measured at 1 m) |
| Assembly | n/a | Ships assembled; CGMagazine says unboxing needs two people and setup with calibration can take more than 30 minutes |
| Best for | families and crafters who want large PLA prints and easy 4 color printing | large prints and engineering filaments |
| Skip if | you want to print ABS or ASA, or only have a light table | you print lots of multi color models |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab A2L
- Tom's Hardware: Editor's Choice. A Flexi panda took 2 h 40 min in one color and 6 h 46 min in three colors. A TPU 95A bag printed in 7 h 9 min. A PETG spinner failed near 95% due to a thin base. The AMS Lite vibrated off an IKEA Lack table after 45 minutes. Source
- FauxHammer (4/5): Called it a great hobby printer with good print quality for its class, but found the live camera feed about 1 frame per second and no ABS or ASA profile at test time. Source
Bambu Lab H2S
- CGMagazine (8/10): Called it refined and reliable. Real world print times were about 20 to 30% shorter than typical fast CoreXY profiles and aggregated XY error measured under 0.5 mm. Multi color prints ran a few hours longer than on the H2D on day long jobs, with considerable purge waste. Source
- The Gadgeteer: Ran the H2S AMS 2 Pro combo for about a month, often around the clock. First calibration took about 30 minutes, PETG CF prints finished well and the AMS 2 Pro was nearly error free. Downsides were purge waste on multi color jobs and the pricey optional Vision Encoder. Source
Questions buyers ask
Which is better, the Bambu Lab A2L or the Bambu Lab H2S?
The Bambu Lab A2L scores higher in our ranking (7.5 vs 6.1 out of 10). Pick the Bambu Lab A2L for families and crafters who want large PLA prints and easy 4 color printing. Pick the Bambu Lab H2S for large prints and engineering filaments.
Which is cheaper?
The Bambu Lab A2L at $439, versus $1,049 for the Bambu Lab H2S, checked Nov 4, 2026.
What is the difference between the A2L and the H2S?
Build volume: 330 x 320 x 325 mm (Tom's Hardware, FauxHammer) on the A2L, 340 x 320 x 340 mm (Bambu Lab) on the H2S. Print speed: Up to 500 mm/s (Bambu Lab via FauxHammer); Tom's Hardware printed at the default 200 to… on the A2L, Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) on the H2S. Multi color: Yes, 4 colors with AMS Lite in the Combo; also works with AMS and AMS 2 Pro (Tom's… on the A2L, Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament… on the H2S.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.