Creality K1 Max vs Creality SPARKX i7
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K1 Max costs $549 and the Creality SPARKX i7 costs $399, so the Creality SPARKX i7 is $150 cheaper. The Creality SPARKX i7 scores higher in our ranking (8.1 vs 7.6 out of 10). Pick the Creality K1 Max for large single color prints on a budget. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. They split the points we can measure, 2 each.
Who wins, point by point
They split the points we can measure, 2 each. Built from today's prices, the specs and independent tests for these two robots.
| K1 Max | SPARKX i7 | Winner | |
|---|---|---|---|
| Price today | $549 | $399 | SPARKX i7 |
| Warranty | 12 months | 1 year | Tie |
| Build volume | 300 x 300 x 300 mm | 260 x 260 x 255 mm | K1 Max |
| Top print speed | 600 mm/s | 500 mm/s | K1 Max |
| Max nozzle temp | 300°C | 300°C | Tie |
| Release year | 2023 | 2025 | SPARKX i7 |
- You care most about build volume (300 x 300 x 300 mm vs 260 x 260 x 255 mm)
- You care most about top print speed (600 mm/s vs 500 mm/s)
- Best for large single color prints on a budget
- You want to spend less (saves $150)
- You want the newer model (2025 vs 2023)
- Best for beginners who want affordable 4 color PLA prints
- Build volume
- 300 x 300 x 300 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- No
- Enclosure
- Yes
Big 300 mm enclosed speed printer with LiDAR and AI camera
Full Creality K1 Max review, pros and cons →- Build volume
- 260 x 260 x 255 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Up to 4 colors
- Enclosure
- No
Quiet, low cost 4 color starter printer from Creality
Full Creality SPARKX i7 review, pros and cons →Side by side
| Creality K1 Max | Creality SPARKX i7 | |
|---|---|---|
| Price | $549 | $399 |
| 3 year cost | $549 | $399 |
| Our score | 7.6/10 | 8.1/10 |
| Rank in 3D printers | #16 | #6 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store) | 1 year (Creality Canada store product page) |
| Build volume | 300 x 300 x 300 mm (Tom's Hardware, TechRadar) | 260 x 260 x 255 mm (Creality) |
| Print speed | Up to 600 mm/s (Creality); Tom's Hardware printed a Benchy in 17 min 38 s at 300 mm/s | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes |
| Multi color | No, single filament | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) |
| Enclosure | Yes, fully enclosed with a flat glass lid and carbon filter (Tom's Hardware) | No, open frame |
| Auto leveling | Yes, automatic with LiDAR plus automatic input shaping (Tom's Hardware) | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) |
| Max nozzle temp | 300 C (TechRadar) | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle |
| Heated bed | Yes, up to 100 C (TechRadar), smooth PEI steel flex plate | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) |
| Filament types | PLA, PETG, PET, TPU, ABS, ASA, PA, PC and carbon fiber variants (TechRadar) | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU |
| Connectivity | Wi-Fi, LAN, USB flash drive; Creality Cloud (Tom's Hardware, TechRadar) | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) |
| Camera | Yes, AI camera for monitoring and timelapse (Tom's Hardware) | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) |
| Noise | Not measured; Tom's Hardware called it not a quiet machine and not for a bedroom | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode |
| Assembly | Ships ready to print with no assembly (Creality) | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) |
| Weight | 18 kg net; 435 x 462 x 526 mm (Tom's Hardware, TechRadar) | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) |
| Best for | large single color prints on a budget | beginners who want affordable 4 color PLA prints |
| Skip if | you want multi color or a quiet printer | you need to print ABS, ASA or nylon |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K1 Max
- Tom's Hardware: Editor's Choice. Printed a Benchy in 17 min 38 s versus about 55 min on an Ender 3 S1. ABS dog dish stand took 9 h 41 min, PETG spool holder 3 h 12 min, TPU dragon 7 h 55 min. Cons were a poor filament path, clumsy Klipper setup and a plate that needs glue. Source
- TechRadar (26.5/30): Recommended. Scored 26.5 out of 30 on its print test with 0.1 mm average dimensional error. Praised AI features and material range, but disliked having to remove the PTFE tube to load filament and the single filament limit. Source
Creality SPARKX i7
- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. Source
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. Source
Questions buyers ask
Which is better, the Creality K1 Max or the Creality SPARKX i7?
The Creality SPARKX i7 scores higher in our ranking (8.1 vs 7.6 out of 10). Pick the Creality K1 Max for large single color prints on a budget. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.
Which is cheaper?
The Creality SPARKX i7 at $399, versus $549 for the Creality K1 Max, checked Nov 4, 2026.
What is the difference between the K1 Max and the SPARKX i7?
Build volume: 300 x 300 x 300 mm (Tom's Hardware, TechRadar) on the K1 Max, 260 x 260 x 255 mm (Creality) on the SPARKX i7. Print speed: Up to 600 mm/s (Creality); Tom's Hardware printed a Benchy in 17 min 38 s at 300 mm/s on the K1 Max, Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7. Multi color: No, single filament on the K1 Max, Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.