Bambu Lab H2S vs Creality K1 Max
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab H2S costs $1,049 and the Creality K1 Max costs $549, so the Creality K1 Max is $500 cheaper. The Creality K1 Max scores higher in our ranking (7.6 vs 6.1 out of 10). Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K1 Max for large single color prints on a budget. The Bambu Lab H2S wins 4 of 5 points we can measure.
Who wins, point by point
The Bambu Lab H2S wins 4 of 5 points we can measure. Built from today's prices, the specs and independent tests for these two robots.
| H2S | K1 Max | Winner | |
|---|---|---|---|
| Price today | $1,049 | $549 | K1 Max |
| Build volume | 340 x 320 x 340 mm | 300 x 300 x 300 mm | H2S |
| Top print speed | 1000 mm/s | 600 mm/s | H2S |
| Max nozzle temp | 350°C | 300°C | H2S |
| Release year | 2025 | 2023 | H2S |
- You care most about build volume (340 x 320 x 340 mm vs 300 x 300 x 300 mm)
- You care most about top print speed (1000 mm/s vs 600 mm/s)
- You care most about max nozzle temp (350°C vs 300°C)
- Best for large prints and engineering filaments
- You want to spend less (saves $500)
- Best for large single color prints on a budget
- Build volume
- 340 x 320 x 340 mm
- Max speed
- Up to 1,000 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Big single nozzle enclosed printer for large and engineering prints
Full Bambu Lab H2S review, pros and cons →- Build volume
- 300 x 300 x 300 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- No
- Enclosure
- Yes
Big 300 mm enclosed speed printer with LiDAR and AI camera
Full Creality K1 Max review, pros and cons →Side by side
| Bambu Lab H2S | Creality K1 Max | |
|---|---|---|
| Price | $1,049 | $549 |
| 3 year cost | $1,049 | $549 |
| Our score | 6.1/10 | 7.6/10 |
| Rank in 3D printers | #28 | #16 |
| Status | on sale | on sale |
| Warranty | n/a | Up to 12 months (Creality store) |
| Build volume | 340 x 320 x 340 mm (Bambu Lab) | 300 x 300 x 300 mm (Tom's Hardware, TechRadar) |
| Print speed | Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) | Up to 600 mm/s (Creality); Tom's Hardware printed a Benchy in 17 min 38 s at 300 mm/s |
| Multi color | Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament. CGMagazine says chained AMS units can hold 16 or more spools | No, single filament |
| Enclosure | Yes, fully enclosed with active chamber heating up to 65 C (Bambu Lab) | Yes, fully enclosed with a flat glass lid and carbon filter (Tom's Hardware) |
| Auto leveling | Yes, automatic calibration; first run calibration took about 30 minutes for The Gadgeteer | Yes, automatic with LiDAR plus automatic input shaping (Tom's Hardware) |
| Max nozzle temp | 350 C (Bambu Lab) | 300 C (TechRadar) |
| Heated bed | Yes, up to 120 C (CGMagazine, The Gadgeteer) | Yes, up to 100 C (TechRadar), smooth PEI steel flex plate |
| Filament types | PLA, PETG, TPU, ABS, ASA, PC, PPA, PA6 GF, PAHT CF and other fiber filled engineering filaments (Bambu Lab) | PLA, PETG, PET, TPU, ABS, ASA, PA, PC and carbon fiber variants (TechRadar) |
| Connectivity | Cloud, LAN, full offline mode, USB drive (not included); MQTT access in Developer Mode (Bambu Lab) | Wi-Fi, LAN, USB flash drive; Creality Cloud (Tom's Hardware, TechRadar) |
| Camera | Yes, 3 cameras including a top down BirdsEye camera and a toolhead camera, with AI failure detection (Bambu Lab) | Yes, AI camera for monitoring and timelapse (Tom's Hardware) |
| Noise | Below 50 dB (Bambu Lab claim, measured at 1 m) | Not measured; Tom's Hardware called it not a quiet machine and not for a bedroom |
| Assembly | Ships assembled; CGMagazine says unboxing needs two people and setup with calibration can take more than 30 minutes | Ships ready to print with no assembly (Creality) |
| Weight | 30 kg printer alone, 40.7 kg AMS combo (The Gadgeteer) | 18 kg net; 435 x 462 x 526 mm (Tom's Hardware, TechRadar) |
| Best for | large prints and engineering filaments | large single color prints on a budget |
| Skip if | you print lots of multi color models | you want multi color or a quiet printer |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab H2S
- CGMagazine (8/10): Called it refined and reliable. Real world print times were about 20 to 30% shorter than typical fast CoreXY profiles and aggregated XY error measured under 0.5 mm. Multi color prints ran a few hours longer than on the H2D on day long jobs, with considerable purge waste. Source
- The Gadgeteer: Ran the H2S AMS 2 Pro combo for about a month, often around the clock. First calibration took about 30 minutes, PETG CF prints finished well and the AMS 2 Pro was nearly error free. Downsides were purge waste on multi color jobs and the pricey optional Vision Encoder. Source
Creality K1 Max
- Tom's Hardware: Editor's Choice. Printed a Benchy in 17 min 38 s versus about 55 min on an Ender 3 S1. ABS dog dish stand took 9 h 41 min, PETG spool holder 3 h 12 min, TPU dragon 7 h 55 min. Cons were a poor filament path, clumsy Klipper setup and a plate that needs glue. Source
- TechRadar (26.5/30): Recommended. Scored 26.5 out of 30 on its print test with 0.1 mm average dimensional error. Praised AI features and material range, but disliked having to remove the PTFE tube to load filament and the single filament limit. Source
Questions buyers ask
Which is better, the Bambu Lab H2S or the Creality K1 Max?
The Creality K1 Max scores higher in our ranking (7.6 vs 6.1 out of 10). Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K1 Max for large single color prints on a budget.
Which is cheaper?
The Creality K1 Max at $549, versus $1,049 for the Bambu Lab H2S, checked Nov 4, 2026.
What is the difference between the H2S and the K1 Max?
Build volume: 340 x 320 x 340 mm (Bambu Lab) on the H2S, 300 x 300 x 300 mm (Tom's Hardware, TechRadar) on the K1 Max. Print speed: Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) on the H2S, Up to 600 mm/s (Creality); Tom's Hardware printed a Benchy in 17 min 38 s at 300 mm/s on the K1 Max. Multi color: Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament… on the H2S, No, single filament on the K1 Max.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.