Bambu Lab H2S vs Creality K2
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab H2S costs $1,049 and the Creality K2 costs $399, so the Creality K2 is $650 cheaper. The Bambu Lab H2S has a published review score and ranks #28 in our 3D printers ranking; the Creality K2 is not scored yet. Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K2 for budget enclosed multi color printing. The Bambu Lab H2S wins 3 of 4 points we can measure.
Who wins, point by point
The Bambu Lab H2S wins 3 of 4 points we can measure. Built from today's prices, the specs and independent tests for these two robots.
| H2S | K2 | Winner | |
|---|---|---|---|
| Price today | $1,049 | $399 | K2 |
| Build volume | 340 x 320 x 340 mm | 260 x 260 x 260 mm | H2S |
| Top print speed | 1000 mm/s | 600 mm/s | H2S |
| Max nozzle temp | 350°C | 300°C | H2S |
- You care most about build volume (340 x 320 x 340 mm vs 260 x 260 x 260 mm)
- You care most about top print speed (1000 mm/s vs 600 mm/s)
- You care most about max nozzle temp (350°C vs 300°C)
- Best for large prints and engineering filaments
- You want to spend less (saves $650)
- Best for budget enclosed multi color printing
- Build volume
- 340 x 320 x 340 mm
- Max speed
- Up to 1,000 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Big single nozzle enclosed printer for large and engineering prints
Full Bambu Lab H2S review, pros and cons →- Build volume
- 260 x 260 x 260 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Affordable enclosed CoreXY printer with optional 4 color CFS
Full Creality K2 review, pros and cons →Side by side
| Bambu Lab H2S | Creality K2 | |
|---|---|---|
| Price | $1,049 | $399 |
| 3 year cost | $1,049 | $399 |
| Our score | 6.1/10 | Not scored yet |
| Rank in 3D printers | #28 | #38 |
| Status | on sale | on sale |
| Warranty | n/a | 1 year (Creality store) |
| Build volume | 340 x 320 x 340 mm (Bambu Lab) | 260 x 260 x 260 mm (Creality) |
| Print speed | Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) | Up to 600 mm/s (Creality) |
| Multi color | Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament. CGMagazine says chained AMS units can hold 16 or more spools | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); CFS cannot feed TPU and has no active drying (Notebookcheck) |
| Enclosure | Yes, fully enclosed with active chamber heating up to 65 C (Bambu Lab) | Yes, enclosed chamber without active heating (Notebookcheck) |
| Auto leveling | Yes, automatic calibration; first run calibration took about 30 minutes for The Gadgeteer | Yes, smart auto leveling of the target print area (Creality) |
| Max nozzle temp | 350 C (Bambu Lab) | 300 C (Notebookcheck, The Gadgeteer) |
| Heated bed | Yes, up to 120 C (CGMagazine, The Gadgeteer) | Yes, up to 100 C, double sided textured PEI plate (Notebookcheck) |
| Filament types | PLA, PETG, TPU, ABS, ASA, PC, PPA, PA6 GF, PAHT CF and other fiber filled engineering filaments (Bambu Lab) | PLA, PETG, ABS, PLA CF (The Gadgeteer); TPU only through the external feed (Notebookcheck) |
| Connectivity | Cloud, LAN, full offline mode, USB drive (not included); MQTT access in Developer Mode (Bambu Lab) | Wi-Fi, USB Type A; Creality Print desktop, web and phone apps (Notebookcheck) |
| Camera | Yes, 3 cameras including a top down BirdsEye camera and a toolhead camera, with AI failure detection (Bambu Lab) | No nozzle camera, per Notebookcheck; Creality lists print failure detection |
| Noise | Below 50 dB (Bambu Lab claim, measured at 1 m) | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB across its K2 series test units |
| Assembly | Ships assembled; CGMagazine says unboxing needs two people and setup with calibration can take more than 30 minutes | Ready to print in about an hour including calibration and a software update (Notebookcheck) |
| Weight | 30 kg printer alone, 40.7 kg AMS combo (The Gadgeteer) | 18.3 kg without CFS; 404 x 436 x 545 mm (Notebookcheck, The Gadgeteer) |
| Best for | large prints and engineering filaments | budget enclosed multi color printing |
| Skip if | you print lots of multi color models | you need a heated chamber |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab H2S
- The Gadgeteer: Ran the H2S AMS 2 Pro combo for about a month, often around the clock. First calibration took about 30 minutes, PETG CF prints finished well and the AMS 2 Pro was nearly error free. Downsides were purge waste on multi color jobs and the pricey optional Vision Encoder. Source
- CGMagazine (8/10): Called it refined and reliable. Real world print times were about 20 to 30% shorter than typical fast CoreXY profiles and aggregated XY error measured under 0.5 mm. Multi color prints ran a few hours longer than on the H2D on day long jobs, with considerable purge waste. Source
Creality K2
- The Gadgeteer: Tested alongside the K2 Pro. A fidget, a fine loop mesh and a PLA pirate ship (with noticeable stringing in the sail gaps) printed fine, but a chainmail style print failed twice. Called it a strong pick for buyers who want a cheaper feature rich printer. Source
- Notebookcheck: Ready to print in about an hour. A 20 mm calibration cube measured within 0.005 mm, threads worked down to M3 and overhangs to 70 degrees printed without supports. Auto filament changes were reliable; one clog cleared in minutes. Cons were no heated chamber and no CFS drying. Source
Questions buyers ask
Which is better, the Bambu Lab H2S or the Creality K2?
The Bambu Lab H2S has a published review score and ranks #28 in our 3D printers ranking; the Creality K2 is not scored yet. Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K2 for budget enclosed multi color printing.
Which is cheaper?
The Creality K2 at $399, versus $1,049 for the Bambu Lab H2S, checked Nov 4, 2026.
What is the difference between the H2S and the K2?
Build volume: 340 x 320 x 340 mm (Bambu Lab) on the H2S, 260 x 260 x 260 mm (Creality) on the K2. Print speed: Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) on the H2S, Up to 600 mm/s (Creality) on the K2. Multi color: Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament… on the H2S, Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.