Bambu Lab H2S vs Creality K2 Plus Combo
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab H2S costs $1,049 and the Creality K2 Plus Combo costs $1,199, so the Bambu Lab H2S is $150 cheaper. The Creality K2 Plus Combo scores higher in our ranking (6.6 vs 6.1 out of 10). Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K2 Plus Combo for large multi color and engineering prints. The Bambu Lab H2S wins 2 of 4 points we can measure (1 tied).
Who wins, point by point
The Bambu Lab H2S wins 2 of 4 points we can measure (1 tied). Built from today's prices, the specs and independent tests for these two robots.
| H2S | K2 Plus Combo | Winner | |
|---|---|---|---|
| Price today | $1,049 | $1,199 | H2S |
| Build volume | 340 x 320 x 340 mm | 350 x 350 x 350 mm | K2 Plus Combo |
| Top print speed | 1000 mm/s | 600 mm/s | H2S |
| Max nozzle temp | 350°C | 350°C | Tie |
- You want to spend less (saves $150)
- You care most about top print speed (1000 mm/s vs 600 mm/s)
- Best for large prints and engineering filaments
- You care most about build volume (350 x 350 x 350 mm vs 340 x 320 x 340 mm)
- Best for large multi color and engineering prints
- Build volume
- 340 x 320 x 340 mm
- Max speed
- Up to 1,000 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Big single nozzle enclosed printer for large and engineering prints
Full Bambu Lab H2S review, pros and cons →- Build volume
- 350 x 350 x 350 mm
- Max speed
- 600 mm/s
- Multicolor
- 4 colors
- Enclosure
- Yes
Big heated chamber printer with 4 color CFS, up to 16 colors
Full Creality K2 Plus Combo review, pros and cons →Side by side
| Bambu Lab H2S | Creality K2 Plus Combo | |
|---|---|---|
| Price | $1,049 | $1,199 |
| 3 year cost | $1,049 | $1,199 |
| Our score | 6.1/10 | 6.6/10 |
| Rank in 3D printers | #28 | #24 |
| Status | on sale | on sale |
| Warranty | n/a | Up to 12 months (Creality store) |
| Build volume | 340 x 320 x 340 mm (Bambu Lab) | 350 x 350 x 350 mm |
| Print speed | Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) | Up to 600 mm/s, 30,000 mm/s² acceleration |
| Multi color | Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament. CGMagazine says chained AMS units can hold 16 or more spools | Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units |
| Enclosure | Yes, fully enclosed with active chamber heating up to 65 C (Bambu Lab) | Yes, with active chamber heating to 60 °C and air purifier |
| Auto leveling | Yes, automatic calibration; first run calibration took about 30 minutes for The Gadgeteer | Yes, full auto leveling with strain gauge and bed tilt calibration |
| Max nozzle temp | 350 C (Bambu Lab) | 350 °C |
| Heated bed | Yes, up to 120 C (CGMagazine, The Gadgeteer) | Yes, up to 120 °C |
| Filament types | PLA, PETG, TPU, ABS, ASA, PC, PPA, PA6 GF, PAHT CF and other fiber filled engineering filaments (Bambu Lab) | PLA, PETG, ABS, ASA, PC, PA, TPU, PLA-CF, PA-CF, PPA-CF, PPS and more (CFS does not feed TPU) |
| Connectivity | Cloud, LAN, full offline mode, USB drive (not included); MQTT access in Developer Mode (Bambu Lab) | Dual band Wi-Fi, Ethernet, USB drive |
| Camera | Yes, 3 cameras including a top down BirdsEye camera and a toolhead camera, with AI failure detection (Bambu Lab) | Yes, two AI cameras (tool head and chamber) |
| Noise | Below 50 dB (Bambu Lab claim, measured at 1 m) | 45 dB or less at 300 mm/s (Creality claim) |
| Assembly | Ships assembled; CGMagazine says unboxing needs two people and setup with calibration can take more than 30 minutes | Pre assembled; install the screen and set up |
| Weight | 30 kg printer alone, 40.7 kg AMS combo (The Gadgeteer) | 35 kg printer, 4.56 kg CFS |
| Best for | large prints and engineering filaments | large multi color and engineering prints |
| Skip if | you print lots of multi color models | you have limited desk space or budget |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab H2S
- CGMagazine (8/10): Called it refined and reliable. Real world print times were about 20 to 30% shorter than typical fast CoreXY profiles and aggregated XY error measured under 0.5 mm. Multi color prints ran a few hours longer than on the H2D on day long jobs, with considerable purge waste. Source
- The Gadgeteer: Ran the H2S AMS 2 Pro combo for about a month, often around the clock. First calibration took about 30 minutes, PETG CF prints finished well and the AMS 2 Pro was nearly error free. Downsides were purge waste on multi color jobs and the pricey optional Vision Encoder. Source
Creality K2 Plus Combo
- Tom's Hardware: Editor's Choice. Benchy in 15 min 56 s; a three color dragon finished 56 minutes faster than a Bambu Lab P1P but made 121.7 g of purge waste versus 99 g. TPU jammed in the CFS. Source
- TechRadar (4.5/5): Scored 24 of 30 on a print quality test and measured about 45 dB at 300 mm/s. A four color Benchy took about 8.5 hours versus about 30 minutes in one color. Source
Questions buyers ask
Which is better, the Bambu Lab H2S or the Creality K2 Plus Combo?
The Creality K2 Plus Combo scores higher in our ranking (6.6 vs 6.1 out of 10). Pick the Bambu Lab H2S for large prints and engineering filaments. Pick the Creality K2 Plus Combo for large multi color and engineering prints.
Which is cheaper?
The Bambu Lab H2S at $1,049, versus $1,199 for the Creality K2 Plus Combo, checked Nov 4, 2026.
What is the difference between the H2S and the K2 Plus Combo?
Build volume: 340 x 320 x 340 mm (Bambu Lab) on the H2S, 350 x 350 x 350 mm on the K2 Plus Combo. Print speed: Up to 1,000 mm/s toolhead speed, 20,000 mm/s2 acceleration (Bambu Lab) on the H2S, Up to 600 mm/s, 30,000 mm/s² acceleration on the K2 Plus Combo. Multi color: Yes with AMS 2 Pro (AMS Combo version); single nozzle, so color changes purge filament… on the H2S, Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units on the K2 Plus Combo.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.