- Build volume
- 500 x 500 x 500 mm
- Max speed
- Up to 700 mm/s
- Multicolor
- No
- Enclosure
- Optional kit
Two quick taps and get the right robot for them, with today's price.
Sovol SV08 Max
Huge 500 mm cube Klipper printer for big parts and props
Researched by Riley Hart · updated Nov 3, 2026
Is the Sovol SV08 Max worth it? The SV08 Max is for makers who need very large parts, like cosplay props or furniture pieces, at a fair price. It costs $1,099 as of Nov 4, 2026, and 2 independent reviewers tested it.
The SV08 Max is for makers who need very large parts, like cosplay props or furniture pieces, at a fair price. It runs plain Klipper and suits people who like to tune their machine. Skip it if you want a quiet, plug and play printer or only print small parts.
Best for: very large single color prints. Skip if: you want quiet, hands off printing.
Specs
- Build volume
- 500 x 500 x 500 mm; 500 x 500 x 450 mm with the enclosure kit (Sovol)
- Print speed
- Up to 700 mm/s, 40,000 mm/s2 (Sovol); Tom's Hardware printed at 40 to 140 mm/s and ran a Benchy in 10 min 45 s
- Multi color
- No, single color; an auxiliary feeder handles filament feed (Tom's Hardware)
- Enclosure
- Optional kit with metal panels, glass doors and rear fans; doors rattled at speed in Tom's Hardware testing
- Auto leveling
- Eddy current bed scan in seconds (Tom's Hardware); quad gantry leveling (Sovol)
- Max nozzle temp
- 300 C, 0.4 mm hardened steel nozzle
- Heated bed
- Up to 100 C, double sided PEI spring steel
- Firmware
- Klipper
3 year cost of ownership
- Robot
- $1,099
- Total
- $1,099
No subscription. Big prints use a lot of filament and long print times, so running cost scales with part size.
Status and safety
- US availability
- ● On sale
- Recalls
- ● No Sovol robot recall in the CPSC database as of Nov 4, 2026. Checked daily.
- FCC authorized
- Not checked
- Company
- ● Active
- Warranty
- Not listed
Price history
Tracked dailyTracking started Nov 4, 2026 at $1,099.
Each day adds a point. Turn on a price alert to hear about drops.
Where to buy
- Amazon
- See price →
- Sovol store
- $1,099 →
Affiliate links. We may earn a commission. It never changes our score. Disclosure
Pros
- 500 mm cube build volume
- Plain Klipper firmware
- Fast eddy current bed leveling
- Linear rails on all axes
Cons
- Loud fans
- Takes a lot of floor space
- Enclosure doors rattle
- Firmware quirks need an experienced user
What independent reviewers found
- Benchy in 10 min 45 s; an ABS container took 5 h 6 min at 140 mm/s. A large dragon took 2 days 8 h after five failures and a 0.2 mm Z offset fix. Called it a niche machine that fills its niche well.
- Tom's Hardware
- Claims 200+ hours of printing. A 300 mm calibration cube measured within 0.2 mm and the full bed scan took about 80 s. Rated it Highly Recommended but noted 2 to 3 h of assembly and a Klipper learning curve.
- 3D Tech Valley
Spec history
Checked dailyNo spec changes since we started tracking on Nov 4, 2026.
Email me when SV08 Max gets cheaper
We check prices every morning. One email per real drop. Unsubscribe anytime.
Own one? Tell us how it holds up
We email owners 3 quick questions now and every 6 months, then show the results here.
Questions buyers ask
How big can it print?
Up to 500 x 500 x 500 mm, or 450 mm tall with the enclosure kit, per Sovol.
Is it multi color?
No. Tom's Hardware notes it is single color, with an auxiliary feeder only.
Is it good for beginners?
Not really. Tom's Hardware says it needs an experienced user, especially for Klipper tuning.
Guides and rankings with the Sovol SV08 Max
Compare the Sovol SV08 Max with
4 head to head comparisons. Most searched first.
Alternatives in 3D printers
See all ranked →We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.