Creality K1 Max vs Flsun T1 Pro
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K1 Max costs $549 and the Flsun T1 Pro costs $549. The Flsun T1 Pro scores higher in our ranking (7.8 vs 7.6 out of 10). Pick the Creality K1 Max for large single color prints on a budget. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. The Flsun T1 Pro wins 2 of 5 points we can measure (3 tied).
Who wins, point by point
The Flsun T1 Pro wins 2 of 5 points we can measure (3 tied). Built from today's prices, the specs and independent tests for these two robots.
| K1 Max | T1 Pro | Winner | |
|---|---|---|---|
| Price today | $549 | $549 | Tie |
| TechRadar score | 26.5/30 | 4.5/5 | Tie |
| Top print speed | 600 mm/s | 1000 mm/s | T1 Pro |
| Max nozzle temp | 300°C | 300°C | Tie |
| Release year | 2023 | 2024 | T1 Pro |
- Best for large single color prints on a budget
- You care most about top print speed (1000 mm/s vs 600 mm/s)
- You want the newer model (2024 vs 2023)
- Best for makers who want very fast PLA and PETG prints
- Build volume
- 300 x 300 x 300 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- No
- Enclosure
- Yes
Big 300 mm enclosed speed printer with LiDAR and AI camera
Full Creality K1 Max review, pros and cons →- Build volume
- 260 mm diameter x 330
- Max speed
- Up to 1,000 mm/s
- Multicolor
- No
- Enclosure
- Yes
Very fast delta printer with a tall round build area
Full Flsun T1 Pro review, pros and cons →Side by side
| Creality K1 Max | Flsun T1 Pro | |
|---|---|---|
| Price | $549 | $549 |
| 3 year cost | $549 | $549 |
| Our score | 7.6/10 | 7.8/10 |
| Rank in 3D printers | #16 | #13 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store) | Not checked |
| Build volume | 300 x 300 x 300 mm (Tom's Hardware, TechRadar) | 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of height is usable |
| Print speed | Up to 600 mm/s (Creality); Tom's Hardware printed a Benchy in 17 min 38 s at 300 mm/s | Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600 mm/s in ASA and high speed PLA |
| Multi color | No, single filament | No, single filament (TechRadar) |
| Enclosure | Yes, fully enclosed with a flat glass lid and carbon filter (Tom's Hardware) | Yes, acrylic sides and smoked glass front (The Gadgeteer); no dedicated chamber heater (3DPrint.com) |
| Auto leveling | Yes, automatic with LiDAR plus automatic input shaping (Tom's Hardware) | Yes, fully automatic leveling with no manual Z offset (The Gadgeteer) |
| Max nozzle temp | 300 C (TechRadar) | 300 C, 0.4 mm brass nozzle (Flsun, The Gadgeteer) |
| Heated bed | Yes, up to 100 C (TechRadar), smooth PEI steel flex plate | Yes, up to 110 C with textured PEI plate (Flsun) |
| Filament types | PLA, PETG, PET, TPU, ABS, ASA, PA, PC and carbon fiber variants (TechRadar) | PLA, PETG, TPU, ABS, ASA, PA, PC, PET (Flsun, The Gadgeteer); ABS warped and failed for 3DPrint.com |
| Connectivity | Wi-Fi, LAN, USB flash drive; Creality Cloud (Tom's Hardware, TechRadar) | Wi-Fi, Klipper web interface, USB drive, OTA updates (The Gadgeteer, 3DPrint.com) |
| Camera | Yes, AI camera for monitoring and timelapse (Tom's Hardware) | Yes, for timelapse and remote monitoring (The Gadgeteer); 3DPrint.com saw timelapse cutouts on long prints |
| Noise | Not measured; Tom's Hardware called it not a quiet machine and not for a bedroom | Flsun claims as low as 55 dB; 3DPrint.com measured 71 dB average with 91 dB peaks |
| Assembly | Ships ready to print with no assembly (Creality) | Partial assembly, about 1 hour (3DPrint.com) to a few hours (The Gadgeteer) |
| Weight | 18 kg net; 435 x 462 x 526 mm (Tom's Hardware, TechRadar) | 18.41 kg net; 436 x 490 x 835 mm (The Gadgeteer) |
| Best for | large single color prints on a budget | makers who want very fast PLA and PETG prints |
| Skip if | you want multi color or a quiet printer | you need a quiet printer or a square build plate |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K1 Max
- TechRadar (26.5/30): Recommended. Scored 26.5 out of 30 on its print test with 0.1 mm average dimensional error. Praised AI features and material range, but disliked having to remove the PTFE tube to load filament and the single filament limit. Source
- Tom's Hardware: Editor's Choice. Printed a Benchy in 17 min 38 s versus about 55 min on an Ender 3 S1. ABS dog dish stand took 9 h 41 min, PETG spool holder 3 h 12 min, TPU dragon 7 h 55 min. Cons were a poor filament path, clumsy Klipper setup and a plate that needs glue. Source
Flsun T1 Pro
- TechRadar (4.5/5): Reviewed the base T1. Scored 29 of 30 in print tests with 0.133 mm average dimensional error. Very loud cooling fan; assembly took about an hour. Source
- The Gadgeteer: Called it the fastest printer the reviewer had used; a vase took about 40 minutes. Zero clogs and zero manual leveling across dozens of prints. Loose display ribbon and menus with no back button. Source
Questions buyers ask
Which is better, the Creality K1 Max or the Flsun T1 Pro?
The Flsun T1 Pro scores higher in our ranking (7.8 vs 7.6 out of 10). Pick the Creality K1 Max for large single color prints on a budget. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints.
What is the difference between the K1 Max and the T1 Pro?
Build volume: 300 x 300 x 300 mm (Tom's Hardware, TechRadar) on the K1 Max, 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of… on the T1 Pro. Print speed: Up to 600 mm/s (Creality); Tom's Hardware printed a Benchy in 17 min 38 s at 300 mm/s on the K1 Max, Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600… on the T1 Pro. Multi color: No, single filament on the K1 Max, No, single filament (TechRadar) on the T1 Pro.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.