Creality K1C (2025) vs Flsun T1 Pro
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K1C (2025) costs $499 and the Flsun T1 Pro costs $549, so the Creality K1C (2025) is $50 cheaper. The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Creality K1C (2025) is not scored yet. Pick the Creality K1C (2025) for fast single color prints in tough materials. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. They split the points we can measure, 1 each.
Who wins, point by point
They split the points we can measure, 1 each. Built from today's prices, the specs and independent tests for these two robots.
| K1C (2025) | T1 Pro | Winner | |
|---|---|---|---|
| Price today | $499 | $549 | K1C (2025) |
| Top print speed | 600 mm/s | 1000 mm/s | T1 Pro |
| Max nozzle temp | 300°C | 300°C | Tie |
- You want to spend less (saves $50)
- Best for fast single color prints in tough materials
- You care most about top print speed (1000 mm/s vs 600 mm/s)
- Best for makers who want very fast PLA and PETG prints
- Build volume
- 220 x 220 x 250 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- No
- Enclosure
- Yes
Fast enclosed printer with an AI camera for one color prints
Full Creality K1C (2025) review, pros and cons →- Build volume
- 260 mm diameter x 330
- Max speed
- Up to 1,000 mm/s
- Multicolor
- No
- Enclosure
- Yes
Very fast delta printer with a tall round build area
Full Flsun T1 Pro review, pros and cons →Side by side
| Creality K1C (2025) | Flsun T1 Pro | |
|---|---|---|
| Price | $499 | $549 |
| 3 year cost | $499 | $549 |
| Our score | Not scored yet | 7.8/10 |
| Rank in 3D printers | #42 | #13 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store) | Not checked |
| Build volume | 220 x 220 x 250 mm | 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of height is usable |
| Print speed | Up to 600 mm/s (300 mm/s typical), 20,000 mm/s² acceleration | Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600 mm/s in ASA and high speed PLA |
| Multi color | No, single color; Creality says the 2025 version is set to add multi color with its CFS unit later | No, single filament (TechRadar) |
| Enclosure | Yes, fully enclosed with glass door, carbon filter and chamber fan | Yes, acrylic sides and smoked glass front (The Gadgeteer); no dedicated chamber heater (3DPrint.com) |
| Auto leveling | Yes, hands free auto leveling with auto Z offset | Yes, fully automatic leveling with no manual Z offset (The Gadgeteer) |
| Max nozzle temp | 300 °C, hardened steel nozzle | 300 C, 0.4 mm brass nozzle (Flsun, The Gadgeteer) |
| Heated bed | Yes, up to 100 °C, PEI flexible plate | Yes, up to 110 C with textured PEI plate (Flsun) |
| Filament types | PLA, PETG, PET, TPU, ABS, ASA, PA, PC, PLA-CF, PA-CF, PET-CF | PLA, PETG, TPU, ABS, ASA, PA, PC, PET (Flsun, The Gadgeteer); ABS warped and failed for 3DPrint.com |
| Connectivity | Wi-Fi, USB drive, Creality Cloud app | Wi-Fi, Klipper web interface, USB drive, OTA updates (The Gadgeteer, 3DPrint.com) |
| Camera | Yes, AI camera for spaghetti detection, time lapse and remote view | Yes, for timelapse and remote monitoring (The Gadgeteer); 3DPrint.com saw timelapse cutouts on long prints |
| Noise | 45 dB or less in silent mode at 1 m (Creality claim) | Flsun claims as low as 55 dB; 3DPrint.com measured 71 dB average with 91 dB peaks |
| Assembly | Comes assembled; Creality claims about 3 minutes to power on | Partial assembly, about 1 hour (3DPrint.com) to a few hours (The Gadgeteer) |
| Weight | 12.4 kg net | 18.41 kg net; 436 x 490 x 835 mm (The Gadgeteer) |
| Best for | fast single color prints in tough materials | makers who want very fast PLA and PETG prints |
| Skip if | you want multi color prints today | you need a quiet printer or a square build plate |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K1C (2025)
- Tom's Hardware: Editor's Choice. A speed Benchy took 13 min 53 s at 300 mm/s and ABS and nylon parts printed with no warping. Cons were the poor filament path and needing glue stick on the PEI plate. Source
- Tech Advisor: Called it a strong, reliable printer for beginners with impressive print quality and a useful built in camera, but noisy at high speed and frustrating for filament changes. Source
Flsun T1 Pro
- The Gadgeteer: Called it the fastest printer the reviewer had used; a vase took about 40 minutes. Zero clogs and zero manual leveling across dozens of prints. Loose display ribbon and menus with no back button. Source
- 3DPrint.com: Over 300 hours of printing with no part failures. Measured 71 dB average and 91 dB peaks versus Flsun's 50 dB claim. Parts came out slightly undersized, for example 98.85 mm on a 100 mm Y test, and ABS warped. Source
Questions buyers ask
Which is better, the Creality K1C (2025) or the Flsun T1 Pro?
The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Creality K1C (2025) is not scored yet. Pick the Creality K1C (2025) for fast single color prints in tough materials. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints.
Which is cheaper?
The Creality K1C (2025) at $499, versus $549 for the Flsun T1 Pro, checked Nov 4, 2026.
What is the difference between the K1C (2025) and the T1 Pro?
Build volume: 220 x 220 x 250 mm on the K1C (2025), 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of… on the T1 Pro. Print speed: Up to 600 mm/s (300 mm/s typical), 20,000 mm/s² acceleration on the K1C (2025), Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600… on the T1 Pro. Multi color: No, single color; Creality says the 2025 version is set to add multi color with its CFS… on the K1C (2025), No, single filament (TechRadar) on the T1 Pro.
Also consider at this price
See all ranked →More comparisons
- Creality K1C (2025) vs Elegoo Centauri Carbon 2
- Bambu Lab P1S vs Creality K1C (2025)
- Bambu Lab A1 vs Creality K1C (2025)
- Creality K1 Max vs Creality K1C (2025)
- Creality Hi Combo vs Creality K1C (2025)
- Creality K1C (2025) vs Flashforge Adventurer 5M Pro
- Creality K1C (2025) vs Creality SPARKX i7
- Anycubic Photon Mono M7 Pro vs Creality K1C (2025)
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure