Creality K2 vs Flashforge Adventurer 5M Pro
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K2 costs $399 and the Flashforge Adventurer 5M Pro costs $569, so the Creality K2 is $170 cheaper. The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Creality K2 is not scored yet. Pick the Creality K2 for budget enclosed multi color printing. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces. The Creality K2 wins 4 of 6 points we can measure (2 tied).
Who wins, point by point
The Creality K2 wins 4 of 6 points we can measure (2 tied). Built from today's prices, the specs and independent tests for these two robots.
| K2 | Adventurer 5M Pro | Winner | |
|---|---|---|---|
| Price today | $399 | $569 | K2 |
| Warranty | 1 year | 1 year | Tie |
| Build volume | 260 x 260 x 260 mm | 220 x 220 x 220 mm | K2 |
| Top print speed | 600 mm/s | 600 mm/s | Tie |
| Max nozzle temp | 300°C | 280°C | K2 |
| Release year | 2025 | 2023 | K2 |
- You want to spend less (saves $170)
- You care most about build volume (260 x 260 x 260 mm vs 220 x 220 x 220 mm)
- You care most about max nozzle temp (300°C vs 280°C)
- Best for budget enclosed multi color printing
- Best for enclosed printing in small spaces
- Build volume
- 260 x 260 x 260 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Affordable enclosed CoreXY printer with optional 4 color CFS
Full Creality K2 review, pros and cons →- Build volume
- 220 x 220 x 220 mm
- Max speed
- Up to 600 mm/s travel
- Multicolor
- No
- Enclosure
- Yes
Compact enclosed CoreXY printer with filters and quick nozzles
Full Flashforge Adventurer 5M Pro review, pros and cons →Side by side
| Creality K2 | Flashforge Adventurer 5M Pro | |
|---|---|---|
| Price | $399 | $569 |
| 3 year cost | $399 | $569 |
| Our score | Not scored yet | 7.9/10 |
| Rank in 3D printers | #38 | #12 |
| Status | on sale | on sale |
| Warranty | 1 year (Creality store) | 1 year limited on the printer, 3 months on extruder parts (Flashforge) |
| Build volume | 260 x 260 x 260 mm (Creality) | 220 x 220 x 220 mm (Flashforge) |
| Print speed | Up to 600 mm/s (Creality) | Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to 300 mm/s in practice |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); CFS cannot feed TPU and has no active drying (Notebookcheck) | No, single filament |
| Enclosure | Yes, enclosed chamber without active heating (Notebookcheck) | Yes, enclosed shell with foam gaskets and dual filtration (Flashforge, 3DPrint.com) |
| Auto leveling | Yes, smart auto leveling of the target print area (Creality) | Yes, full auto calibration; about 10 minutes (3DPrint.com) to 15 minutes (3Dnatives) |
| Max nozzle temp | 300 C (Notebookcheck, The Gadgeteer) | 280 C (Flashforge) |
| Heated bed | Yes, up to 100 C, double sided textured PEI plate (Notebookcheck) | Yes, Flashforge says up to 100 C; 3Dnatives lists 110 C |
| Filament types | PLA, PETG, ABS, PLA CF (The Gadgeteer); TPU only through the external feed (Notebookcheck) | PLA, PETG, ABS, ASA; TPU, PLA CF and PETG CF with 0.6 or 0.8 mm nozzles (Flashforge) |
| Connectivity | Wi-Fi, USB Type A; Creality Print desktop, web and phone apps (Notebookcheck) | Wi-Fi, Ethernet, USB (Flashforge) |
| Camera | No nozzle camera, per Notebookcheck; Creality lists print failure detection | Yes, built in camera for monitoring (Flashforge) |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB across its K2 series test units | Flashforge claims 50 dB in low noise mode and 55 dB standard; 3DPrint.com measured 68 dB average, 79 dB max, 46 dB min |
| Assembly | Ready to print in about an hour including calibration and a software update (Notebookcheck) | About 95% pre assembled; remove transport screws, attach PTFE tube and spool holder (Flashforge, 3Dnatives) |
| Weight | 18.3 kg without CFS; 404 x 436 x 545 mm (Notebookcheck, The Gadgeteer) | 380 x 400 x 453 mm without spool holder (Flashforge); weight not listed |
| Best for | budget enclosed multi color printing | enclosed printing in small spaces |
| Skip if | you need a heated chamber | you need large or multi color prints |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K2
- Notebookcheck: Ready to print in about an hour. A 20 mm calibration cube measured within 0.005 mm, threads worked down to M3 and overhangs to 70 degrees printed without supports. Auto filament changes were reliable; one clog cleared in minutes. Cons were no heated chamber and no CFS drying. Source
- The Gadgeteer: Tested alongside the K2 Pro. A fidget, a fine loop mesh and a PLA pirate ship (with noticeable stringing in the sail gaps) printed fine, but a chainmail style print failed twice. Called it a strong pick for buyers who want a cheaper feature rich printer. Source
Flashforge Adventurer 5M Pro
- 3DPrint.com: A full volume ASA print took 24 h 44 min with no warping and a 100 mm cube measured 99.70 x 99.71 x 100.02 mm. Measured 68 dB average and 79 dB max. Ran with 100% uptime over a month; TPU needed 30 to 40 mm/s. Source
- 3Dnatives (9.5/10): Scored 9.5/10 with 10/10 for print quality. Auto calibration took about 15 minutes with no manual input. Cons were a confusing slicer transition, small build volume, no multi material and a rear mounted spool. Source
Questions buyers ask
Which is better, the Creality K2 or the Flashforge Adventurer 5M Pro?
The Flashforge Adventurer 5M Pro has a published review score and ranks #12 in our 3D printers ranking; the Creality K2 is not scored yet. Pick the Creality K2 for budget enclosed multi color printing. Pick the Flashforge Adventurer 5M Pro for enclosed printing in small spaces.
Which is cheaper?
The Creality K2 at $399, versus $569 for the Flashforge Adventurer 5M Pro, checked Nov 4, 2026.
What is the difference between the K2 and the Adventurer 5M Pro?
Build volume: 260 x 260 x 260 mm (Creality) on the K2, 220 x 220 x 220 mm (Flashforge) on the Adventurer 5M Pro. Print speed: Up to 600 mm/s (Creality) on the K2, Up to 600 mm/s travel, 20,000 mm/s2 acceleration (Flashforge); 3DPrint.com says 200 to… on the Adventurer 5M Pro. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2, No, single filament on the Adventurer 5M Pro.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.