Skip to content
Live

Print this page and put it in the kit box. The QR code opens the step by step build.

Build card · robotsforthat.com

Build your mars rover

SunFounder GalaxyRVR. 49 steps, 3 to 4 hours. A check after every step.

The finished mars rover
  1. Scan the code with a phone camera.
  2. Do one small step per screen.
  3. Tick what you see before you move on.
  4. Stuck? Tap Stuck and show the coach a photo.

Screw check, actual size

Print at 100% scale. Lay a screw on its drawing: same length means it is the right one.

M3x6 screw · 6 mm
M3x10 screw · 10 mm
M3x25 screw · 25 mm
M3x14 screw · 14 mm
M3x8+6 standoff · 14 mm
M3 nut
M2.3x20 screw · 20 mm
M3x28 standoff · 28 mm
M1.5x3 screw · 3 mm
M3x30+6 standoff · 36 mm
Builder: ____________________Started: ________Finished: ________