Anycubic Kobra 3 V2 Combo vs Anycubic Kobra S1 Combo
Researched by Riley Hart · prices checked Nov 3, 2026
As of Nov 3, 2026, the Anycubic Kobra 3 V2 Combo costs $379 and the Anycubic Kobra S1 Combo costs $399, so the Anycubic Kobra 3 V2 Combo is $20 cheaper. The Anycubic Kobra S1 Combo scores higher in our ranking (8.5 vs 8.0 out of 10). Pick the Anycubic Kobra 3 V2 Combo for budget beginners who mostly print PLA and want to try multi color. Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget. The Anycubic Kobra 3 V2 Combo wins 2 of 4 points we can measure (1 tied).
Who wins, point by point
The Anycubic Kobra 3 V2 Combo wins 2 of 4 points we can measure (1 tied). Built from today's prices, the specs and independent tests for these two robots.
| Kobra 3 V2 Combo | Kobra S1 Combo | Winner | |
|---|---|---|---|
| Price today | $379 | $399 | Kobra 3 V2 Combo |
| Build volume | 255 x 255 x 260 mm | 250 x 250 x 250 mm | Kobra 3 V2 Combo |
| Top print speed | 600 mm/s | 600 mm/s | Tie |
| Max nozzle temp | 300°C | 320°C | Kobra S1 Combo |
- You want to spend less (saves $20)
- You care most about build volume (255 x 255 x 260 mm vs 250 x 250 x 250 mm)
- Best for budget beginners who mostly print PLA and want to try multi color
- You care most about max nozzle temp (320°C vs 300°C)
- Best for easy multi color printing on a budget
- Build volume
- 255 x 255 x 260 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- No
Budget 4 color bed slinger with a filament drying ACE Pro
Full Anycubic Kobra 3 V2 Combo review, pros and cons →- Build volume
- 250 x 250 x 250 mm
- Max speed
- 600 mm/s
- Multicolor
- 4 colors
- Enclosure
- Yes
Quiet enclosed 4 color printer with a filament drying feeder
Full Anycubic Kobra S1 Combo review, pros and cons →Side by side
| Anycubic Kobra 3 V2 Combo | Anycubic Kobra S1 Combo | |
|---|---|---|
| Price | $379 | $399 |
| 3 year cost | $379 | $399 |
| Our score | 8.0/10 | 8.5/10 |
| Rank in 3D printers | #8 | #3 |
| Status | on sale | on sale |
| Warranty | Not checked | 1 year |
| Build volume | 255 x 255 x 260 mm (Anycubic, Tom's Hardware) | 250 x 250 x 250 mm |
| Print speed | Up to 600 mm/s, 300 mm/s default, 20,000 mm/s2 (Anycubic); Notebookcheck found 300 mm/s realistic for quality prints | Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration |
| Multi color | Yes, 4 colors with the included ACE Pro, 8 with a second unit (Anycubic); ACE Pro dries filament up to 55 C while printing (Tom's Hardware) | Yes, 4 colors with one ACE Pro; 8 colors with two |
| Enclosure | No, open frame bed slinger (Notebookcheck) | Yes, fully enclosed with LED lights |
| Auto leveling | Yes, LeviQ 3.0 load cell leveling with auto Z offset (Anycubic, Tom's Hardware) | Yes, LeviQ 3.0 with Z offset |
| Max nozzle temp | 300 C, 0.4 mm high flow brass nozzle (Anycubic, Tom's Hardware) | 320 °C |
| Heated bed | Yes, up to 110 C, double sided PEI spring steel plate (Anycubic, Notebookcheck) | Yes, up to 120 °C, PEI spring steel plate |
| Filament types | PLA, PETG, TPU, ABS (Anycubic); Anycubic does not recommend ABS or ASA on the Combo; Tom's Hardware tested PLA, PETG and TPU | PLA, PETG, ABS, ASA, TPU 95A (single color only); FAQ also lists PC, PA and fiber filled |
| Connectivity | Wi-Fi, LAN mode, Anycubic app, USB (Anycubic, Tom's Hardware) | Anycubic app, slicer software, USB drive |
| Camera | Yes, 720p; the mount must be printed by the user (Anycubic, Notebookcheck) | Yes, 480P HD camera |
| Noise | About 55 dB (Anycubic); Notebookcheck measured 55 to 60 dB(A) at 1 m while printing | 46 dB or less standard, 44 dB or less quiet mode (Anycubic claim) |
| Weight | 9.37 kg printer plus 4.6 kg ACE Pro; printer 452.9 x 504.7 x 483 mm (Anycubic) | 18 kg printer, 4.6 kg ACE Pro |
| Assembly | n/a | About 15 minutes from unboxing to first print (Anycubic claim) |
| Best for | budget beginners who mostly print PLA and want to try multi color | easy multi color printing on a budget |
| Skip if | you need reliable multi color output or want an enclosed printer for ABS | you want low waste or deep tuning |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Anycubic Kobra 3 V2 Combo
- Notebookcheck: Good flow up to about 25 mm3/s. 300 mm/s was realistic; a speed Benchy took about 12 minutes with flaws. 55 to 60 dB(A) while printing and about 180 W on PLA. Multi color failed out of the box due to a purge design flaw. Source
- Tom's Hardware: A multi color PLA dino print took about 8 h 40 min at an average 130 mm/s with about 100 g of waste. A PETG print took 2 h 4 min with light stringing. TPU printed cleanly at an average 50 mm/s. Source
Anycubic Kobra S1 Combo
- Notebookcheck: Measured 44 dB(A) at one meter. Quality was best up to about 200 mm/s, and nozzle cleaning plus purging caused significant waste. Source
- TechRadar (4.5/5): Scored 27 of 30 on a print quality test with about 0.21 mm average X/Y error. A 43 minute single color print became a 14 hour multi color print. Source
Questions buyers ask
Which is better, the Anycubic Kobra 3 V2 Combo or the Anycubic Kobra S1 Combo?
The Anycubic Kobra S1 Combo scores higher in our ranking (8.5 vs 8.0 out of 10). Pick the Anycubic Kobra 3 V2 Combo for budget beginners who mostly print PLA and want to try multi color. Pick the Anycubic Kobra S1 Combo for easy multi color printing on a budget.
Which is cheaper?
The Anycubic Kobra 3 V2 Combo at $379, versus $399 for the Anycubic Kobra S1 Combo, checked Nov 3, 2026.
What is the difference between the Kobra 3 V2 Combo and the Kobra S1 Combo?
Build volume: 255 x 255 x 260 mm (Anycubic, Tom's Hardware) on the Kobra 3 V2 Combo, 250 x 250 x 250 mm on the Kobra S1 Combo. Print speed: Up to 600 mm/s, 300 mm/s default, 20,000 mm/s2 (Anycubic); Notebookcheck found 300 mm/s… on the Kobra 3 V2 Combo, Up to 600 mm/s (300 mm/s recommended), 20,000 mm/s² acceleration on the Kobra S1 Combo. Multi color: Yes, 4 colors with the included ACE Pro, 8 with a second unit (Anycubic); ACE Pro dries… on the Kobra 3 V2 Combo, Yes, 4 colors with one ACE Pro; 8 colors with two on the Kobra S1 Combo.
Also consider at this price
See all ranked →More comparisons
- Anycubic Kobra 3 V2 Combo vs Flashforge AD5X
- Anycubic Kobra 3 V2 Combo vs Bambu Lab A1
- Anycubic Kobra 3 V2 Combo vs Bambu Lab P1S
- Anycubic Kobra 3 V2 Combo vs Anycubic Kobra X
- Anycubic Kobra 3 V2 Combo vs Elegoo Centauri 2
- Anycubic Kobra 3 V2 Combo vs Elegoo Neptune 4 Max
- Anycubic Kobra 3 V2 Combo vs Anycubic Photon Mono M7 Pro
- Anycubic Kobra S1 Combo vs Bambu Lab P1S
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.