- Build volume
- 255 x 255 x 260 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- No
Two quick taps and get the right robot for them, with today's price.
Anycubic Kobra 3 V2 Combo
Budget 4 color bed slinger with a filament drying ACE Pro
Researched by Riley Hart · updated Nov 3, 2026
Is the Anycubic Kobra 3 V2 Combo worth it? The Kobra 3 V2 Combo is one of the cheapest ways to get 4 color printing with filament drying. It costs $379 as of Nov 3, 2026, and Creative Bloq scored it 8/10.
The Kobra 3 V2 Combo is one of the cheapest ways to get 4 color printing with filament drying. Reviewers praise its single color print quality and new Orca based slicer. The ACE Pro feeder caused most of the errors in long term testing, so multi color work needs patience.
Best for: budget beginners who mostly print PLA and want to try multi color. Skip if: you need reliable multi color output or want an enclosed printer for ABS.
Specs
- Build volume
- 255 x 255 x 260 mm (Anycubic, Tom's Hardware)
- Print speed
- Up to 600 mm/s, 300 mm/s default, 20,000 mm/s2 (Anycubic); Notebookcheck found 300 mm/s realistic for quality prints
- Multi color
- Yes, 4 colors with the included ACE Pro, 8 with a second unit (Anycubic); ACE Pro dries filament up to 55 C while printing (Tom's Hardware)
- Enclosure
- No, open frame bed slinger (Notebookcheck)
- Auto leveling
- Yes, LeviQ 3.0 load cell leveling with auto Z offset (Anycubic, Tom's Hardware)
- Max nozzle temp
- 300 C, 0.4 mm high flow brass nozzle (Anycubic, Tom's Hardware)
- Heated bed
- Yes, up to 110 C, double sided PEI spring steel plate (Anycubic, Notebookcheck)
- Filament types
- PLA, PETG, TPU, ABS (Anycubic); Anycubic does not recommend ABS or ASA on the Combo; Tom's Hardware tested PLA, PETG and TPU
3 year cost of ownership
- Robot
- $379
- Total
- $379
No subscription. Color changes purge filament; Tom's Hardware saw about 100 g of waste on one multi color PLA print. Notebookcheck measured about 180 W while printing PLA. A 3 year total is not computed.
Status and safety
- US availability
- ● On sale
- Recalls
- ● No Anycubic robot recall in the CPSC database as of Nov 4, 2026. Checked daily.
- FCC authorized
- Not checked
- Company
- ● Active
- Warranty
- ● Not checked
Price history
Tracked dailyTracking started Nov 3, 2026 at $379.
Each day adds a point. Turn on a price alert to hear about drops.
Where to buy
- Amazon
- See price →
- Anycubic US store (Kobra 3 V2 Combo)
- $379 →
Affiliate links. We may earn a commission. It never changes our score. Disclosure
Pros
- Low price for a 4 color setup
- ACE Pro dries filament while printing
- Accurate auto leveling (Creative Bloq)
- Camera with spaghetti detection
- Quick setup, under 30 minutes (Notebookcheck)
Cons
- ACE Pro jams and misfeeds (Creative Bloq, Tom's Hardware)
- High purge waste on color changes
- Open frame, not for ABS or ASA
- Camera mount must be printed
- 600 mm/s claim not practical for quality prints (Notebookcheck)
What independent reviewers found
- A multi color PLA dino print took about 8 h 40 min at an average 130 mm/s with about 100 g of waste. A PETG print took 2 h 4 min with light stringing. TPU printed cleanly at an average 50 mm/s.
- Tom's Hardware
- Good flow up to about 25 mm3/s. 300 mm/s was realistic; a speed Benchy took about 12 minutes with flaws. 55 to 60 dB(A) while printing and about 180 W on PLA. Multi color failed out of the box due to a purge design flaw.
- Notebookcheck
- Tested for about four months. Single color quality was strong and leveling accurate, but the ACE Pro caused about 99% of errors, and AI spaghetti detection gave false alerts.
- Creative Bloq · 8/10
Spec history
Checked dailyNo spec changes since we started tracking on Nov 4, 2026.
Email me when Kobra 3 V2 Combo gets cheaper
We check prices every morning. One email per real drop. Unsubscribe anytime.
Own one? Tell us how it holds up
We email owners 3 quick questions now and every 6 months, then show the results here.
Questions buyers ask
Is the Kobra 3 V2 enclosed?
No. It is an open bed slinger, so it is best for PLA, PETG and TPU.
How many colors can the Kobra 3 V2 Combo print?
Four with the included ACE Pro, or eight with a second ACE Pro unit.
Can I use OrcaSlicer with it?
Notebookcheck found only Anycubic Slicer Next supported. That slicer is based on Orca Slicer.
Guides and rankings with the Anycubic Kobra 3 V2 Combo
Compare the Anycubic Kobra 3 V2 Combo with
8 head to head comparisons. Most searched first.
Alternatives in 3D printers
See all ranked →We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.