Creality K2 Plus Combo vs Creality SPARKX i7
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K2 Plus Combo costs $1,199 and the Creality SPARKX i7 costs $399, so the Creality SPARKX i7 is $800 cheaper. The Creality SPARKX i7 scores higher in our ranking (8.1 vs 6.6 out of 10). Pick the Creality K2 Plus Combo for large multi color and engineering prints. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. The Creality K2 Plus Combo wins 3 of 5 points we can measure (1 tied).
Who wins, point by point
The Creality K2 Plus Combo wins 3 of 5 points we can measure (1 tied). Built from today's prices, the specs and independent tests for these two robots.
| K2 Plus Combo | SPARKX i7 | Winner | |
|---|---|---|---|
| Price today | $1,199 | $399 | SPARKX i7 |
| Warranty | 12 months | 1 year | Tie |
| Build volume | 350 x 350 x 350 mm | 260 x 260 x 255 mm | K2 Plus Combo |
| Top print speed | 600 mm/s | 500 mm/s | K2 Plus Combo |
| Max nozzle temp | 350°C | 300°C | K2 Plus Combo |
- You care most about build volume (350 x 350 x 350 mm vs 260 x 260 x 255 mm)
- You care most about top print speed (600 mm/s vs 500 mm/s)
- You care most about max nozzle temp (350°C vs 300°C)
- Best for large multi color and engineering prints
- You want to spend less (saves $800)
- Best for beginners who want affordable 4 color PLA prints
- Build volume
- 350 x 350 x 350 mm
- Max speed
- 600 mm/s
- Multicolor
- 4 colors
- Enclosure
- Yes
Big heated chamber printer with 4 color CFS, up to 16 colors
Full Creality K2 Plus Combo review, pros and cons →- Build volume
- 260 x 260 x 255 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Up to 4 colors
- Enclosure
- No
Quiet, low cost 4 color starter printer from Creality
Full Creality SPARKX i7 review, pros and cons →Side by side
| Creality K2 Plus Combo | Creality SPARKX i7 | |
|---|---|---|
| Price | $1,199 | $399 |
| 3 year cost | $1,199 | $399 |
| Our score | 6.6/10 | 8.1/10 |
| Rank in 3D printers | #24 | #6 |
| Status | on sale | on sale |
| Warranty | Up to 12 months (Creality store) | 1 year (Creality Canada store product page) |
| Build volume | 350 x 350 x 350 mm | 260 x 260 x 255 mm (Creality) |
| Print speed | Up to 600 mm/s, 30,000 mm/s² acceleration | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes |
| Multi color | Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) |
| Enclosure | Yes, with active chamber heating to 60 °C and air purifier | No, open frame |
| Auto leveling | Yes, full auto leveling with strain gauge and bed tilt calibration | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) |
| Max nozzle temp | 350 °C | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle |
| Heated bed | Yes, up to 120 °C | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) |
| Filament types | PLA, PETG, ABS, ASA, PC, PA, TPU, PLA-CF, PA-CF, PPA-CF, PPS and more (CFS does not feed TPU) | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU |
| Connectivity | Dual band Wi-Fi, Ethernet, USB drive | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) |
| Camera | Yes, two AI cameras (tool head and chamber) | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) |
| Noise | 45 dB or less at 300 mm/s (Creality claim) | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode |
| Assembly | Pre assembled; install the screen and set up | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) |
| Weight | 35 kg printer, 4.56 kg CFS | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) |
| Best for | large multi color and engineering prints | beginners who want affordable 4 color PLA prints |
| Skip if | you have limited desk space or budget | you need to print ABS, ASA or nylon |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K2 Plus Combo
- Tom's Hardware: Editor's Choice. Benchy in 15 min 56 s; a three color dragon finished 56 minutes faster than a Bambu Lab P1P but made 121.7 g of purge waste versus 99 g. TPU jammed in the CFS. Source
- TechRadar (4.5/5): Scored 24 of 30 on a print quality test and measured about 45 dB at 300 mm/s. A four color Benchy took about 8.5 hours versus about 30 minutes in one color. Source
Creality SPARKX i7
- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. Source
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. Source
Questions buyers ask
Which is better, the Creality K2 Plus Combo or the Creality SPARKX i7?
The Creality SPARKX i7 scores higher in our ranking (8.1 vs 6.6 out of 10). Pick the Creality K2 Plus Combo for large multi color and engineering prints. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.
Which is cheaper?
The Creality SPARKX i7 at $399, versus $1,199 for the Creality K2 Plus Combo, checked Nov 4, 2026.
What is the difference between the K2 Plus Combo and the SPARKX i7?
Build volume: 350 x 350 x 350 mm on the K2 Plus Combo, 260 x 260 x 255 mm (Creality) on the SPARKX i7. Print speed: Up to 600 mm/s, 30,000 mm/s² acceleration on the K2 Plus Combo, Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7. Multi color: Yes, 4 colors with the included CFS; up to 16 colors with 4 CFS units on the K2 Plus Combo, Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7.
Also consider at this price
See all ranked →More comparisons
- Bambu Lab H2D vs Creality K2 Plus Combo
- Creality K2 Plus Combo vs Prusa Research CORE One+ (Gen 2)
- Bambu Lab P1S vs Creality K2 Plus Combo
- Creality K2 Plus Combo vs Elegoo Centauri Carbon 2
- Bambu Lab H2S vs Creality K2 Plus Combo
- Bambu Lab H2C vs Creality K2 Plus Combo
- Creality K2 Plus Combo vs Qidi Max4
- Creality K2 Plus Combo vs Sovol SV08 Max
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure