Creality SPARKX i7 vs Flashforge AD5X
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality SPARKX i7 costs $399 and the Flashforge AD5X costs $349, so the Flashforge AD5X is $50 cheaper. The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Flashforge AD5X is not scored yet. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. Pick the Flashforge AD5X for cheap 4 color printing in a small space. The Creality SPARKX i7 wins 2 of 5 points we can measure (2 tied).
Who wins, point by point
The Creality SPARKX i7 wins 2 of 5 points we can measure (2 tied). Built from today's prices, the specs and independent tests for these two robots.
| SPARKX i7 | AD5X | Winner | |
|---|---|---|---|
| Price today | $399 | $349 | AD5X |
| Warranty | 1 year | 1 year | Tie |
| Build volume | 260 x 260 x 255 mm | 220 x 220 x 220 mm | SPARKX i7 |
| Top print speed | 500 mm/s | 300 mm/s | SPARKX i7 |
| Max nozzle temp | 300°C | 300°C | Tie |
- You care most about build volume (260 x 260 x 255 mm vs 220 x 220 x 220 mm)
- You care most about top print speed (500 mm/s vs 300 mm/s)
- Best for beginners who want affordable 4 color PLA prints
- You want to spend less (saves $50)
- Best for cheap 4 color printing in a small space
- Build volume
- 260 x 260 x 255 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Up to 4 colors
- Enclosure
- No
Quiet, low cost 4 color starter printer from Creality
Full Creality SPARKX i7 review, pros and cons →- Build volume
- 220 x 220 x 220 mm
- Max speed
- Up to 300 mm/s print
- Multicolor
- Yes
- Enclosure
- No
Compact open frame 4 color printer at a low price
Full Flashforge AD5X review, pros and cons →Side by side
| Creality SPARKX i7 | Flashforge AD5X | |
|---|---|---|
| Price | $399 | $349 |
| 3 year cost | $399 | $349 |
| Our score | 8.1/10 | Not scored yet |
| Rank in 3D printers | #6 | #34 |
| Status | on sale | on sale |
| Warranty | 1 year (Creality Canada store product page) | 1 year limited; 3 months on extruder parts |
| Build volume | 260 x 260 x 255 mm (Creality) | 220 x 220 x 220 mm |
| Print speed | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes | Up to 300 mm/s print, 600 mm/s travel, 20,000 mm/s² acceleration |
| Multi color | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) | Yes, 4 colors with the built in IFS |
| Enclosure | No, open frame | No, open frame; DIY enclosure kit sold separately |
| Auto leveling | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) | Yes, one click auto leveling |
| Max nozzle temp | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle | 300 °C |
| Heated bed | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) | Yes, up to 110 °C, PEI steel sheet |
| Filament types | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU | PLA, PETG, TPU 95A, TPU 64D to 75D, PLA-CF, PETG-CF |
| Connectivity | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) | Wi-Fi, Ethernet, USB |
| Camera | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) | None (Tom's Hardware notes no camera) |
| Noise | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode | About 58 dB without the enclosure (ProToolReviews) |
| Assembly | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) | Three steps: screen, filament holder and multi color module |
| Weight | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) | 11.4 kg (Tom's Hardware) |
| Best for | beginners who want affordable 4 color PLA prints | cheap 4 color printing in a small space |
| Skip if | you need to print ABS, ASA or nylon | you want a camera or enclosed printing |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality SPARKX i7
- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. Source
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. Source
Flashforge AD5X
- Tom's Hardware: Excellent print quality across PLA, PETG, TPU and ASA, but the Orca based slicer crashed about every third print. A 33 frog plate wasted 11 g over 23 color swaps. Source
- ProToolReviews: Called it a well rounded multicolor printer with sharp prints and reliable runs. Noted about 58 dB noise unless enclosed and suggested the optional enclosure. Source
Questions buyers ask
Which is better, the Creality SPARKX i7 or the Flashforge AD5X?
The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Flashforge AD5X is not scored yet. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. Pick the Flashforge AD5X for cheap 4 color printing in a small space.
Which is cheaper?
The Flashforge AD5X at $349, versus $399 for the Creality SPARKX i7, checked Nov 4, 2026.
What is the difference between the SPARKX i7 and the AD5X?
Build volume: 260 x 260 x 255 mm (Creality) on the SPARKX i7, 220 x 220 x 220 mm on the AD5X. Print speed: Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7, Up to 300 mm/s print, 600 mm/s travel, 20,000 mm/s² acceleration on the AD5X. Multi color: Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7, Yes, 4 colors with the built in IFS on the AD5X.
Also consider at this price
See all ranked →More comparisons
- Bambu Lab A1 vs Creality SPARKX i7
- Anycubic Kobra X vs Creality SPARKX i7
- Bambu Lab A1 mini vs Creality SPARKX i7
- Creality SPARKX i7 vs Elegoo Centauri Carbon 2
- Creality SPARKX i7 vs Elegoo Neptune 4 Max
- Anycubic Kobra S1 Combo vs Creality SPARKX i7
- Creality K1 Max vs Creality SPARKX i7
- Creality Hi Combo vs Creality SPARKX i7
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.