Creality K2 vs Creality SPARKX i7
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Creality K2 costs $399 and the Creality SPARKX i7 costs $399. The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Creality K2 is not scored yet. Pick the Creality K2 for budget enclosed multi color printing. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints. The Creality K2 wins 1 of 5 points we can measure (4 tied).
Who wins, point by point
The Creality K2 wins 1 of 5 points we can measure (4 tied). Built from today's prices, the specs and independent tests for these two robots.
| K2 | SPARKX i7 | Winner | |
|---|---|---|---|
| Price today | $399 | $399 | Tie |
| Warranty | 1 year | 1 year | Tie |
| Build volume | 260 x 260 x 260 mm | 260 x 260 x 255 mm | Tie |
| Top print speed | 600 mm/s | 500 mm/s | K2 |
| Max nozzle temp | 300°C | 300°C | Tie |
- You care most about top print speed (600 mm/s vs 500 mm/s)
- Best for budget enclosed multi color printing
- Best for beginners who want affordable 4 color PLA prints
- Build volume
- 260 x 260 x 260 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- Yes
- Enclosure
- Yes
Affordable enclosed CoreXY printer with optional 4 color CFS
Full Creality K2 review, pros and cons →- Build volume
- 260 x 260 x 255 mm
- Max speed
- Up to 500 mm/s
- Multicolor
- Up to 4 colors
- Enclosure
- No
Quiet, low cost 4 color starter printer from Creality
Full Creality SPARKX i7 review, pros and cons →Side by side
| Creality K2 | Creality SPARKX i7 | |
|---|---|---|
| Price | $399 | $399 |
| 3 year cost | $399 | $399 |
| Our score | Not scored yet | 8.1/10 |
| Rank in 3D printers | #38 | #6 |
| Status | on sale | on sale |
| Warranty | 1 year (Creality store) | 1 year (Creality Canada store product page) |
| Build volume | 260 x 260 x 260 mm (Creality) | 260 x 260 x 255 mm (Creality) |
| Print speed | Up to 600 mm/s (Creality) | Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in 21 minutes |
| Multi color | Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with four units (Creality); CFS cannot feed TPU and has no active drying (Notebookcheck) | Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does not retract spools (Tom's Hardware) |
| Enclosure | Yes, enclosed chamber without active heating (Notebookcheck) | No, open frame |
| Auto leveling | Yes, smart auto leveling of the target print area (Creality) | Yes, full auto leveling and Z offset before each print (Creality, Tom's Hardware) |
| Max nozzle temp | 300 C (Notebookcheck, The Gadgeteer) | Not listed by Creality; Tom's Hardware notes a 300 C materials limit and a 0.4 mm hardened steel nozzle |
| Heated bed | Yes, up to 100 C, double sided textured PEI plate (Notebookcheck) | Yes, up to 100 C, two sided PEI plate (Creality, Tom's Hardware) |
| Filament types | PLA, PETG, ABS, PLA CF (The Gadgeteer); TPU only through the external feed (Notebookcheck) | PLA, PLA-Silk, PETG, TPU, PLA-CF (Creality); Tom's Hardware printed 95A and 85A TPU |
| Connectivity | Wi-Fi, USB Type A; Creality Print desktop, web and phone apps (Notebookcheck) | Wi-Fi 2.4 GHz, USB drive, LAN mode, cloud and app (Creality, Tom's Hardware) |
| Camera | No nozzle camera, per Notebookcheck; Creality lists print failure detection | Yes, 720p AI camera with light and privacy cover, spaghetti detection (Creality) |
| Noise | Creality says it runs as quietly as typing on a laptop; The Gadgeteer measured about 46 dB across its K2 series test units | No dB figure; Tom's Hardware and CGMagazine found it very quiet, with a Silent mode |
| Assembly | Ready to print in about an hour including calibration and a software update (Notebookcheck) | About 5 minutes to assemble and 20 minutes to the first print (CGMagazine) |
| Weight | 18.3 kg without CFS; 404 x 436 x 545 mm (Notebookcheck, The Gadgeteer) | 9.12 kg; 470 x 423 x 456 mm. CFS Lite adds about 3.4 kg (Creality, Tom's Hardware) |
| Best for | budget enclosed multi color printing | beginners who want affordable 4 color PLA prints |
| Skip if | you need a heated chamber | you need to print ABS, ASA or nylon |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Creality K2
- Notebookcheck: Ready to print in about an hour. A 20 mm calibration cube measured within 0.005 mm, threads worked down to M3 and overhangs to 70 degrees printed without supports. Auto filament changes were reliable; one clog cleared in minutes. Cons were no heated chamber and no CFS drying. Source
- The Gadgeteer: Tested alongside the K2 Pro. A fidget, a fine loop mesh and a PLA pirate ship (with noticeable stringing in the sail gaps) printed fine, but a chainmail style print failed twice. Called it a strong pick for buyers who want a cheaper feature rich printer. Source
Creality SPARKX i7
- Tom's Hardware: Editor's Choice. Benchy in 21 minutes. A tuned four color castle used 31.59 g of filament plus 49.38 g in the purge tower. Only one failure across the multicolor tests, from bed adhesion. Source
- CGMagazine (8.5/10): Ready to print in about 20 minutes. Prints were smooth and clean. The AI camera caught the one failed print, stopped the printer and sent an alert. The remote live feed failed once or twice. Source
Questions buyers ask
Which is better, the Creality K2 or the Creality SPARKX i7?
The Creality SPARKX i7 has a published review score and ranks #6 in our 3D printers ranking; the Creality K2 is not scored yet. Pick the Creality K2 for budget enclosed multi color printing. Pick the Creality SPARKX i7 for beginners who want affordable 4 color PLA prints.
What is the difference between the K2 and the SPARKX i7?
Build volume: 260 x 260 x 260 mm (Creality) on the K2, 260 x 260 x 255 mm (Creality) on the SPARKX i7. Print speed: Up to 600 mm/s (Creality) on the K2, Up to 500 mm/s, 10,000 mm/s2 acceleration (Creality); Tom's Hardware printed a Benchy in… on the SPARKX i7. Multi color: Yes with the CFS (included in the Combo), 4 spools per unit and up to 16 colors with… on the K2, Up to 4 colors with the CFS Lite (Color Combo); takes cardboard and 2 kg spools but does… on the SPARKX i7.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure