Bambu Lab H2C vs Snapmaker U1
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Bambu Lab H2C costs $1,859 and the Snapmaker U1 costs $699, so the Snapmaker U1 is $1,160 cheaper. The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Bambu Lab H2C is not scored yet. Pick the Bambu Lab H2C for makers who print a lot of multi color or multi material parts. Pick the Snapmaker U1 for fast multi color with little waste. The Bambu Lab H2C wins 2 of 3 points we can measure.
Who wins, point by point
The Bambu Lab H2C wins 2 of 3 points we can measure. Built from today's prices, the specs and independent tests for these two robots.
| H2C | U1 | Winner | |
|---|---|---|---|
| Price today | $1,859 | $699 | U1 |
| Build volume | 305 x 320 x 325 mm | 270 x 270 x 270 mm | H2C |
| Max nozzle temp | 350°C | 300°C | H2C |
- You care most about build volume (305 x 320 x 325 mm vs 270 x 270 x 270 mm)
- You care most about max nozzle temp (350°C vs 300°C)
- Best for makers who print a lot of multi color or multi material parts
- You want to spend less (saves $1,160)
- Best for fast multi color with little waste
- Build volume
- 305 x 320 x 325 mm
- Max speed
- No max speed listed by
- Multicolor
- Yes
- Enclosure
- Yes
Big enclosed Bambu that swaps hotends to cut multi color waste
Full Bambu Lab H2C review, pros and cons →- Build volume
- 270 x 270 x 270 mm
- Max speed
- Up to 500 mm/s toolhead
- Multicolor
- Yes
- Enclosure
- No
4 head tool changer for fast multi color with little purge waste
Full Snapmaker U1 review, pros and cons →Side by side
| Bambu Lab H2C | Snapmaker U1 | |
|---|---|---|
| Price | $1,859 | $699 |
| 3 year cost | $1,859 | $699 |
| Our score | Not scored yet | 7.3/10 |
| Rank in 3D printers | #49 | #19 |
| Status | on sale | on sale |
| Warranty | Not checked | 1 year in the US for machines and modules (Snapmaker US store) |
| Build volume | 305 x 320 x 325 mm single nozzle, 300 x 320 x 325 mm dual nozzle, 330 x 320 x 325 mm total (Bambu Lab) | 270 x 270 x 270 mm (Snapmaker) |
| Print speed | No max speed listed by Bambu Lab; Tom's Hardware printed a speed Benchy in 16 min 37 s | Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) |
| Multi color | Yes, AMS 2 Pro included; Vortek rack of 6 induction hotends plus a second nozzle. Tom's Hardware found swaps about twice as fast as other Bambu AMS printers | Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and about 5 s for TechRadar, with very low purge waste |
| Enclosure | Yes, enclosed with active chamber heating to 65 C and air purification (Bambu Lab) | No, semi open; optional Top Cover sold separately for ABS, ASA, PA and PC (Snapmaker) |
| Auto leveling | Yes, hands free automatic leveling; first self check took about 45 minutes (Tom's Hardware) | Yes, mesh bed leveling and automatic toolhead offset calibration (Snapmaker) |
| Max nozzle temp | 350 C; hotends heat in about 8 s (Bambu Lab) | 300 C, 0.4 mm stainless steel nozzles (Snapmaker) |
| Heated bed | Yes, up to 120 C, textured PEI plate (Bambu Lab, Tom's Hardware) | Yes, up to 100 C, flexible PEI plate (Snapmaker, TechRadar) |
| Filament types | PLA, PETG, TPU, ABS, ASA and high temp filaments up to 350 C such as PPS (Tom's Hardware); TPU handling was cumbersome | PLA, PETG, TPU, PVA, PCTG; PET, ABS, ASA, PA, PC with the Top Cover; carbon and glass fiber blends also need a hardened nozzle (Snapmaker) |
| Connectivity | Wi-Fi, LAN, USB stick (Tom's Hardware) | Wi-Fi (2.4 GHz), USB flash drive (Snapmaker); Tom's Hardware also lists LAN. Klipper firmware, OrcaSlicer support |
| Camera | Yes, live view, nozzle and toolhead cameras at 1080p; 8 MP BirdsEye camera (Bambu Lab) | Yes, 2 MP chamber camera (Snapmaker); both reviewers hit an early bug where it did not work with Orca |
| Noise | n/a | No dB figure; TechRadar found it much quieter than competing multi filament machines |
| Assembly | First self check and leveling took about 45 minutes (Tom's Hardware) | Setup takes 15 to 30 minutes (TechRadar) |
| Weight | 32.5 kg; 492 x 514 x 626 mm (Tom's Hardware) | 18.2 kg; 584 x 499 x 730 mm (Snapmaker) |
| Best for | makers who print a lot of multi color or multi material parts | fast multi color with little waste |
| Skip if | you mostly print one color or one material | you mostly print single color parts |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Bambu Lab H2C
- Tom's Hardware: Editor's Choice. A five color castle took 11 h 13 min with a 41 g purge tower and no other waste, versus 23 h 30 min and 279 g of waste on the H2D. Prusa XL did it in 6 h. Source
- Hackster: The same multi color job took 4 h 05 min and 111 g of filament on the H2C versus 5 h 28 min and 145 g on the H2D. A 275 mm test plate measured 274.44 mm before calibration. Source
Snapmaker U1
- Tom's Hardware: Editor's Choice. Tool swaps took about 10 to 12 s versus about 90 s on Bambu Lab. A PLA spiders print took 3 h 20 min with 4.4 g of purge waste, where a P1P took about 2 hours longer and used about 25 g more. A multicolor lettering print wasted just 0.76 g. Source
- TechRadar (4.5/5): Scored 4.5 out of 5 with average dimensional error of 0.056 mm. Tool changes took about 5 s and multi color prints ran two to three times faster than before; a robot tortoise finished in under a day versus 36 hours previously. Cons were add ons needed for some materials and early connectivity bugs. Source
Questions buyers ask
Which is better, the Bambu Lab H2C or the Snapmaker U1?
The Snapmaker U1 has a published review score and ranks #19 in our 3D printers ranking; the Bambu Lab H2C is not scored yet. Pick the Bambu Lab H2C for makers who print a lot of multi color or multi material parts. Pick the Snapmaker U1 for fast multi color with little waste.
Which is cheaper?
The Snapmaker U1 at $699, versus $1,859 for the Bambu Lab H2C, checked Nov 4, 2026.
What is the difference between the H2C and the U1?
Build volume: 305 x 320 x 325 mm single nozzle, 300 x 320 x 325 mm dual nozzle, 330 x 320 x 325 mm… on the H2C, 270 x 270 x 270 mm (Snapmaker) on the U1. Print speed: No max speed listed by Bambu Lab; Tom's Hardware printed a speed Benchy in 16 min 37 s on the H2C, Up to 500 mm/s toolhead speed, 20,000 mm/s2 acceleration (Snapmaker) on the U1. Multi color: Yes, AMS 2 Pro included; Vortek rack of 6 induction hotends plus a second nozzle. Tom's… on the H2C, Yes, 4 independent toolheads; tool swaps took about 10 to 12 s for Tom's Hardware and… on the U1.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure
We check prices every morning and compare them with each model's 2026 low. One email when real deals land, plus our 5 minute Friday roundup. Unsubscribe anytime.