Flsun T1 Pro vs Prusa Research Original Prusa MINI+
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Flsun T1 Pro costs $549 and the Prusa Research Original Prusa MINI+ costs $549. The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Prusa Research Original Prusa MINI+ is not scored yet. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. Pick the Prusa Research Original Prusa MINI+ for beginners who want small, clean prints and Prusa support. The Flsun T1 Pro wins 2 of 3 points we can measure (1 tied).
Who wins, point by point
The Flsun T1 Pro wins 2 of 3 points we can measure (1 tied). Built from today's prices, the specs and independent tests for these two robots.
| T1 Pro | Original Prusa MINI+ | Winner | |
|---|---|---|---|
| Price today | $549 | $549 | Tie |
| Max nozzle temp | 300°C | 280°C | T1 Pro |
| Release year | 2024 | 2020 | T1 Pro |
- You care most about max nozzle temp (300°C vs 280°C)
- You want the newer model (2024 vs 2020)
- Best for makers who want very fast PLA and PETG prints
- Best for beginners who want small, clean prints and Prusa support
- Build volume
- 260 mm diameter x 330
- Max speed
- Up to 1,000 mm/s
- Multicolor
- No
- Enclosure
- Yes
Very fast delta printer with a tall round build area
Full Flsun T1 Pro review, pros and cons →- Build volume
- 180 x 180 x 180 mm
- Max speed
- No max speed published
- Multicolor
- No
- Enclosure
- No
Compact semi assembled Prusa for small, high quality prints
Full Prusa Research Original Prusa MINI+ review, pros and cons →Side by side
| Flsun T1 Pro | Prusa Research Original Prusa MINI+ | |
|---|---|---|
| Price | $549 | $549 |
| 3 year cost | $549 | $549 |
| Our score | 7.8/10 | Not scored yet |
| Rank in 3D printers | #13 | #43 |
| Status | on sale | on sale |
| Warranty | Not checked | 1 year for buyers outside the EU, including the US (Prusa knowledge base) |
| Build volume | 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of height is usable | 180 x 180 x 180 mm |
| Print speed | Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600 mm/s in ASA and high speed PLA | No max speed published; Prusa says Input Shaper and Pressure Advance make it faster than before |
| Multi color | No, single filament (TechRadar) | No |
| Enclosure | Yes, acrylic sides and smoked glass front (The Gadgeteer); no dedicated chamber heater (3DPrint.com) | No, open frame; the store listing is named Enclosure Bundle |
| Auto leveling | Yes, fully automatic leveling with no manual Z offset (The Gadgeteer) | Yes, automatic mesh bed leveling with the SuperPINDA probe |
| Max nozzle temp | 300 C, 0.4 mm brass nozzle (Flsun, The Gadgeteer) | 280 C |
| Heated bed | Yes, up to 110 C with textured PEI plate (Flsun) | Yes, up to 100 C |
| Filament types | PLA, PETG, TPU, ABS, ASA, PA, PC, PET (Flsun, The Gadgeteer); ABS warped and failed for 3DPrint.com | PLA, PETG, ASA, ABS, PC, CPE, PVA, PVB, HIPS, PP, Flex, nylon and filled materials (Prusa) |
| Connectivity | Wi-Fi, Klipper web interface, USB drive, OTA updates (The Gadgeteer, 3DPrint.com) | USB port, RJ-45 Ethernet, optional Wi-Fi module; Prusa Connect |
| Camera | Yes, for timelapse and remote monitoring (The Gadgeteer); 3DPrint.com saw timelapse cutouts on long prints | n/a |
| Noise | Flsun claims as low as 55 dB; 3DPrint.com measured 71 dB average with 91 dB peaks | n/a |
| Assembly | Partial assembly, about 1 hour (3DPrint.com) to a few hours (The Gadgeteer) | Semi assembled; includes a free beginner 3D printing course |
| Weight | 18.41 kg net; 436 x 490 x 835 mm (The Gadgeteer) | 4.5 kg; 380 x 330 x 380 mm without spool holder and external PSU |
| Best for | makers who want very fast PLA and PETG prints | beginners who want small, clean prints and Prusa support |
| Skip if | you need a quiet printer or a square build plate | you want a bigger build or multi color for less |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Flsun T1 Pro
- The Gadgeteer: Called it the fastest printer the reviewer had used; a vase took about 40 minutes. Zero clogs and zero manual leveling across dozens of prints. Loose display ribbon and menus with no back button. Source
- 3DPrint.com: Over 300 hours of printing with no part failures. Measured 71 dB average and 91 dB peaks versus Flsun's 50 dB claim. Parts came out slightly undersized, for example 98.85 mm on a 100 mm Y test, and ABS warped. Source
Prusa Research Original Prusa MINI+
- Tom's Hardware: Called it professional quality on a small scale and good for newcomers. A torture test model ran over 20 hours without problems; print issues traced back to damp filament. Source
- All3DP: Called it an easy recommendation with exceptional print quality and a great interface. Cons were Bowden extruder problems, no carry handle and Wi-Fi not yet available at review time. Source
Questions buyers ask
Which is better, the Flsun T1 Pro or the Prusa Research Original Prusa MINI+?
The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Prusa Research Original Prusa MINI+ is not scored yet. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. Pick the Prusa Research Original Prusa MINI+ for beginners who want small, clean prints and Prusa support.
What is the difference between the T1 Pro and the Original Prusa MINI+?
Build volume: 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of… on the T1 Pro, 180 x 180 x 180 mm on the Original Prusa MINI+. Print speed: Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600… on the T1 Pro, No max speed published; Prusa says Input Shaper and Pressure Advance make it faster than… on the Original Prusa MINI+. Multi color: No, single filament (TechRadar) on the T1 Pro, No on the Original Prusa MINI+.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure