Flsun T1 Pro vs Sovol SV08
Researched by Riley Hart · prices checked Nov 4, 2026
As of Nov 4, 2026, the Flsun T1 Pro costs $549 and the Sovol SV08 costs $549. The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Sovol SV08 is not scored yet. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. Pick the Sovol SV08 for tinkerers who want big and fast. The Flsun T1 Pro wins 1 of 3 points we can measure (2 tied).
Who wins, point by point
The Flsun T1 Pro wins 1 of 3 points we can measure (2 tied). Built from today's prices, the specs and independent tests for these two robots.
| T1 Pro | SV08 | Winner | |
|---|---|---|---|
| Price today | $549 | $549 | Tie |
| Top print speed | 1000 mm/s | 700 mm/s | T1 Pro |
| Max nozzle temp | 300°C | 300°C | Tie |
- You care most about top print speed (1000 mm/s vs 700 mm/s)
- Best for makers who want very fast PLA and PETG prints
- Best for tinkerers who want big and fast
- Build volume
- 260 mm diameter x 330
- Max speed
- Up to 1,000 mm/s
- Multicolor
- No
- Enclosure
- Yes
Very fast delta printer with a tall round build area
Full Flsun T1 Pro review, pros and cons →- Build volume
- 350 x 350 x 345 mm
- Max speed
- Up to 700 mm/s
- Multicolor
- No
- Enclosure
- No
Big, fast open source Voron style printer for tinkerers
Full Sovol SV08 review, pros and cons →Side by side
| Flsun T1 Pro | Sovol SV08 | |
|---|---|---|
| Price | $549 | $549 |
| 3 year cost | $549 | $549 |
| Our score | 7.8/10 | Not scored yet |
| Rank in 3D printers | #13 | #44 |
| Status | on sale | on sale |
| Warranty | Not checked | n/a |
| Build volume | 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of height is usable | 350 x 350 x 345 mm (Sovol) |
| Print speed | Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600 mm/s in ASA and high speed PLA | Up to 700 mm/s, 40,000 mm/s2 acceleration (Sovol claim); Tom's Hardware printed a speed Benchy in 13 min 25 s |
| Multi color | No, single filament (TechRadar) | No, single filament |
| Enclosure | Yes, acrylic sides and smoked glass front (The Gadgeteer); no dedicated chamber heater (3DPrint.com) | No, open frame; optional open enclosure sold separately or in bundles (Sovol) |
| Auto leveling | Yes, fully automatic leveling with no manual Z offset (The Gadgeteer) | Yes, quad gantry leveling with four Z motors plus mesh leveling via inductive and pressure sensors (Sovol); full sequence about 5 minutes (3DWithUs) |
| Max nozzle temp | 300 C, 0.4 mm brass nozzle (Flsun, The Gadgeteer) | 300 C, 0.4 mm hardened steel nozzle (Sovol, Tom's Hardware) |
| Heated bed | Yes, up to 110 C with textured PEI plate (Flsun) | Yes, up to 100 C, PEI spring steel sheet (Sovol) |
| Filament types | PLA, PETG, TPU, ABS, ASA, PA, PC, PET (Flsun, The Gadgeteer); ABS warped and failed for 3DPrint.com | PLA, PETG, TPU, PETG CF, ABS (Sovol spec list); open frame limits ABS without the enclosure |
| Connectivity | Wi-Fi, Klipper web interface, USB drive, OTA updates (The Gadgeteer, 3DPrint.com) | Wi-Fi (2.4 GHz, WPA2 only), Ethernet, USB; Klipper with Mainsail, no cloud account needed (Sovol, Tom's Hardware) |
| Camera | Yes, for timelapse and remote monitoring (The Gadgeteer); 3DPrint.com saw timelapse cutouts on long prints | Yes, gantry mounted camera for monitoring and timelapse (Sovol) |
| Noise | Flsun claims as low as 55 dB; 3DPrint.com measured 71 dB average with 91 dB peaks | Not measured; 3DWithUs lists a noisy motherboard fan |
| Assembly | Partial assembly, about 1 hour (3DPrint.com) to a few hours (The Gadgeteer) | 90% pre assembled, about 1 hour to build (Sovol, 3DWithUs); Tom's Hardware cites an afternoon |
| Weight | 18.41 kg net; 436 x 490 x 835 mm (The Gadgeteer) | 13.3 kg; 400 x 400 x 530 mm frame (Tom's Hardware); 550 x 537 x 575 mm with screen and spool holder (Sovol) |
| Best for | makers who want very fast PLA and PETG prints | tinkerers who want big and fast |
| Skip if | you need a quiet printer or a square build plate | you want plug and play simplicity |
Specs are maker claims unless a reviewer is named. Prices from the stores we link, checked daily.
What reviewers found
Flsun T1 Pro
- The Gadgeteer: Called it the fastest printer the reviewer had used; a vase took about 40 minutes. Zero clogs and zero manual leveling across dozens of prints. Loose display ribbon and menus with no back button. Source
- 3DPrint.com: Over 300 hours of printing with no part failures. Measured 71 dB average and 91 dB peaks versus Flsun's 50 dB claim. Parts came out slightly undersized, for example 98.85 mm on a 100 mm Y test, and ABS warped. Source
Sovol SV08
- Tom's Hardware: Called it probably the best Voron lite printer to date and the fastest on its speed list with a 13 min 25 s Benchy. A vase took 2 h 3 min. Default profiles over extruded until tuned, the PEI bed needed glue for some fast prints and TPU strung heavily. Source
- 3DWithUs (4.4): Assembly took about 1 hour with some awkward cable routing, and the full leveling sequence about 5 minutes. A Benchy took 12 minutes and multi part, flexible and functional prints came out well with no tuning. Cons were the small screen and a noisy motherboard fan. Source
Questions buyers ask
Which is better, the Flsun T1 Pro or the Sovol SV08?
The Flsun T1 Pro has a published review score and ranks #13 in our 3D printers ranking; the Sovol SV08 is not scored yet. Pick the Flsun T1 Pro for makers who want very fast PLA and PETG prints. Pick the Sovol SV08 for tinkerers who want big and fast.
What is the difference between the T1 Pro and the SV08?
Build volume: 260 mm diameter x 330 mm tall (Flsun); The Gadgeteer and 3DPrint.com say about 285 mm of… on the T1 Pro, 350 x 350 x 345 mm (Sovol) on the SV08. Print speed: Up to 1,000 mm/s, 30,000 mm/s2 acceleration (Flsun); 3DPrint.com printed at up to 600… on the T1 Pro, Up to 700 mm/s, 40,000 mm/s2 acceleration (Sovol claim); Tom's Hardware printed a speed… on the SV08. Multi color: No, single filament (TechRadar) on the T1 Pro, No, single filament on the SV08.
Also consider at this price
See all ranked →More comparisons
All 3D printers, ranked
See the ranking →Affiliate links. We may earn a commission. It never changes our score. Disclosure