Bissell robot vacuum "SmartClean E2" (E2): what it means and the fix
Works for Bissell SpinWave (2859, 3115 and 2931 families), EV675 (2503), SmartClean (1605) and DigiPro (2142) robots.
What it means: The top cover may be open, or the dust bin lid is not fitted.
Quick fix: Install the dust bin properly.
Fix it in 3 steps
- Install the dust bin properly.Done?
- Close the top cover.Done?
- If the error does not clear by itself, turn the power switch off and back on.Did it work?
Fixed when: The robot detects the fix and the error clears.
Great, it is fixed. Bookmark this page in case it comes back.
Still showing SmartClean E2?
E2 stays with the bin and cover fitted. Contact Bissell. Contact Bissell support. Have the serial number ready: Model number is on the label on the underside of the robot.. Warranty: EV675: 1 year limited warranty per Bissell's product page. Check the warranty guide for your model.. Bissell support →
Parts that fix this
Why it happens
- Top cover open
- Dust bin or its lid not installed properly
Other Bissell robot vacuum errors
1 beepSpinWave 1 beep, flashing red›1 beepSpinWave wheel stuck›1 beepSpinWave water pump failure›2 beepsSpinWave side brushes stuck›2 beepsSpinWave bumper stuck or trapped›2 beepsSpinWave trapped on carpet in mop mode›3 beepsSpinWave front caster error›3 beepsSpinWave roller brush stuck›3 beepsSpinWave low water›3 beepsSpinWave tank motor failure›EV675 flashing red›EV675 solid red, 3 beeps›EV675 breathing blue›E1SmartClean E1›E3SmartClean E3›E4, E5SmartClean E4 or E5›E6SmartClean E6›LoSmartClean Lo›E5DigiPro E5›All 21 Bissell robot vacuum codes →