Bissell robot vacuum "SmartClean E6" (E6): what it means and the fix
Works for Bissell SpinWave (2859, 3115 and 2931 families), EV675 (2503), SmartClean (1605) and DigiPro (2142) robots.
What it means: The battery is not installed properly, or the power switch is off.
Quick fix: Turn the power switch off.
Fix it in 4 steps
- Turn the power switch off.Done?
- Press the two circles on the battery cover, slide it toward you and remove it.Done?
- Install the battery with its + and minus terminals matching the marks in the compartment.Do not remove the plastic sleeve from the battery pack.Done?
- Refit the cover and turn the power switch on.Did it work?
Great, it is fixed. Bookmark this page in case it comes back.
Still showing SmartClean E6?
E6 stays with the battery seated and the switch on. The battery may be worn. Contact Bissell support. Have the serial number ready: Model number is on the label on the underside of the robot.. Warranty: EV675: 1 year limited warranty per Bissell's product page. Check the warranty guide for your model.. Bissell support →
Parts that fix this
Why it happens
- Battery not seated
- Power switch off
Other Bissell robot vacuum errors
1 beepSpinWave 1 beep, flashing red›1 beepSpinWave wheel stuck›1 beepSpinWave water pump failure›2 beepsSpinWave side brushes stuck›2 beepsSpinWave bumper stuck or trapped›2 beepsSpinWave trapped on carpet in mop mode›3 beepsSpinWave front caster error›3 beepsSpinWave roller brush stuck›3 beepsSpinWave low water›3 beepsSpinWave tank motor failure›E1SmartClean E1›E2SmartClean E2›E3SmartClean E3›E4, E5SmartClean E4 or E5›LoSmartClean Lo›E5DigiPro E5›All 21 Bissell robot vacuum codes →Keeps happening? Compare before you replace
Questions owners ask
What is error E6 on a Bissell SmartClean?
The battery is not installed properly or the power switch is off. Reseat the battery with the terminals matching and turn the switch on.