- Build volume
- 220 x 220 x 250 mm
- Max speed
- Up to 600 mm/s
- Multicolor
- No
- Enclosure
- No
Sovol SV06 ACE
Budget Klipper printer with a camera for fast PLA and PETG
Researched by Riley Hart · updated Oct 27, 2026
SCORED
We started tracking this price on Oct 27, 2026 and have not found a past sale price yet, so we cannot say if $239 is a good deal. Black Friday is Nov 27, 2026, 31 days away, when robots in this category usually get their biggest cuts. Get a price drop alert.
The SV06 ACE is a fast, low cost open printer that runs Klipper and includes a camera. It suits tinkerers who print mostly PLA and PETG and like to tune settings. Skip it if you want multi color, enclosed ABS printing or a quiet machine.
Best for: tinkerers who want speed on a budget. Skip if: you want multi color or quiet printing.
Specs
- Build volume
- 220 x 220 x 250 mm
- Print speed
- Up to 600 mm/s, 20,000 mm/s² acceleration; Sovol FAQ says 250 to 300 mm/s in real prints
- Multi color
- No, single color
- Enclosure
- No, open frame
- Auto leveling
- Yes, fully automatic with pressure sensor
- Max nozzle temp
- 300 °C, all metal hot end
- Heated bed
- Yes, up to 100 °C, textured PEI plate
- Filament types
- PLA, PETG, TPU, PVA; ABS with an enclosure
3 year cost of ownership
- Robot
- $239
- Total
- $239
Filament is the main running cost. No consumable price list was checked, so a 3 year cost is not computed.
Status and safety
- US availability
- ● On sale
- Recalls
- Not checked
- FCC authorized
- Not checked
- Company
- ● Active
- Warranty
- Not listed
Price history
Tracked dailyTracking started Oct 27, 2026 at $239.
Each day adds a point. Turn on a price alert to hear about drops.
Where to buy
- Sovol store
- $239 →
Affiliate links. We may earn a commission. It never changes our score. Disclosure
Pros
- Low price with a built in camera
- Klipper firmware with web access
- Fast Benchy of about 13 minutes in Tom's Hardware testing
- Auto leveling and direct drive
Cons
- Open frame, poor fit for ABS
- Loud cooling fan at speed
- TPU strings at higher speed
- No upgrade path from the original SV06
What independent reviewers found
- Editor's Choice. A Benchy printed in 13 min 8 s with no ringing or layer shifts. TPU was fair with significant stringing, and the cooling fan whines.
- Tom's Hardware
- Real world speed was about 200 to 300 mm/s. It was loud at full speed and some units shipped with dry bearings. Recommended for PLA and PETG tinkerers, not for plug and play users.
- 3D Tech Valley
Spec history
Checked dailySpec tracking starts with the next daily check.
Email me when SV06 ACE gets cheaper
We check prices every morning. One email per real drop, and you confirm your email first.
Own one? Tell us how it holds up
We email owners 3 quick questions now and every 6 months, then show the results here.
Questions buyers ask
Is the original Sovol SV06 still sold?
The Sovol store now lists the SV06 ACE and SV06 Plus ACE as its SV06 printers.
Does it have a camera?
Yes. You can watch prints and make time lapses through the web interface.
Can it print ABS?
Only with an enclosure, which is not included. It works best with PLA and PETG.