● Checked Nov 9, 2026From Pudu support
Pudu BellaBot
Pudu BellaBot "Robot will not power on" (Robot can't boot normally): what it means and the fix
Steps4
ToolsNone
PartsNone
Works for Pudu BellaBot (BL100, BL101, BL110) and BellaBot Pro delivery robots.
Short answer
What it means: The robot does not start up normally.
Quick fix: Check whether the emergency stop switch is pressed. Turn it clockwise to release it.
Fix it in 4 steps
- Check whether the emergency stop switch is pressed. Turn it clockwise to release it.Done?
- Check the battery level and charge the robot through the adapter if it is low.On the BellaBot Pro, press the button on the battery to see the level.Done?
- If the battery level is normal, check the battery and the rear cover are installed correctly.Done?
- Check the key switch is set to ON.Did it work?
Fixed when: The bottom light strip lights and the screen starts.
Great, it is fixed. Bookmark this page in case it comes back.
Still showing Robot will not power on?
The emergency stop switch is damaged, or it still will not start. Contact your local Pudu distributor, or Pudu technical service at [email protected]. Contact Pudu support at +86 755-86952935. Warranty: Varies by component; see the warranty card. Pudu support →
Parts that fix this
BatteryFor Pudu BellaBot on AmazonCheck price →Check the part fits your model. Affiliate links: we may earn a commission at no cost to you.
Why it happens
- The emergency stop switch is pressed or damaged
- Low battery
- The battery or rear cover is not installed correctly
Other Pudu BellaBot errors
Loss of positionPositioning failure (I'm lost)›Low battery, pleBattery too low›Motor rotation aMotor error›Sensor connectioSensor error›POST failsSelf test (POST) fails›Keeps happening? Compare before you replace
Pudu BellaBot Pro$16,000 · Upgraded BellaBot with an 18.5 in ad screen and swappable batteryCheck price →
Bear Robotics Servi vs Pudu BellaBotPoint by point