Dreame robot mower Charging error: what it means and the fix
Works for Dreame A2 and A3 AWD series (A3 AWD 1000, A3 AWD Pro 2500 and 3500).
What it means: The mower is on the station, but the charging current or voltage is not normal.
Quick fix: Check that the charging station is plugged in and has power.
Fix it in 3 steps
- Check that the charging station is plugged in and has power.Done?
- Clean the charging contacts on the robot and on the station.Done?
- Dock the robot again.Did it work?
Fixed when: The mower charges and the battery level rises.
Great, it is fixed. Bookmark this page in case it comes back.
Still showing Charging error?
The message keeps coming back after a restart. Contact Dreame after-sales service through support.dreametech.com, or the [email protected] address in the manual, with your serial number and a photo or video of the problem. Contact Dreame support. Dreame support →
Parts that fix this
Why it happens
- Charging station not powered
- Dirty charging contacts
- Charging fault
Other Dreame robot mower errors
The robot is not connected to the app›Robot lifted›Robot tilted›Robot trapped›Wheel error›Blade disc can't rotate›The blade disc fails to move up or down›The blade disc cannot move to the side›Bumper error›Battery temperature too high›Battery temperature is high›Battery temperature is low›LiDAR is blocked›LiDAR malfunction›LiDAR is dirty›LiDAR temperature is high›LiDAR temperature is too high›Robot is lost›The robot is in the no-go zone›The robot is outside the map›Emergency stop is activated›Low battery›The robot is away from the map. Risk of being stolen›Failed to return to the charging station›Failed to dock in the charging station›Positioning failed›Insufficient space for turning in front of the station›Path obstructed›There is an issue with the front camera›Boundary detection error occurs during Auto-Mapping›Abnormal vibration›All 35 Dreame robot mower codes →Keeps happening? Compare before you replace
Questions owners ask
Why won't my Dreame mower charge?
For Charging error, Dreame says to check the station has power, clean the contacts on the robot and the station, and dock again. Battery temperature messages can also stop charging, below 6 °C or at 45 °C and above.